Cold Roll Forming Machine

Gurukrupa Industries is a leading and widely recognized manufacturer and exporter of C Channel Roll Forming Machine, CZ Purlin Roll Forming Machine, Roofing Sheet Making Machine, Roof Panel Roll Forming Machine, Gypsum Channel Machine, Trapezoid Roll Forming Machine, Corrugated Roll Forming Machine, Stud Roll Forming Machine, Ceiling Channel Roll Forming Machine, Pop Channel Roll Forming Machine, Color Coated Roof Forming Machine, False Ceiling Machine, Ultra Channel Roll Forming Machine, Duplex Roll Forming Machine, Cable Tray Roll Forming Machine, Glazed Tile Roll Forming Machine, W Beam Roll Forming Machine, Double layer Roll Forming Machine, Roofing Sheet Roll Forming Machine, Roof Panel Roll Forming Machine, Highway Guardrail Roll Forming Machine, , Cut To Length, Door Frame Roll Forming Machine ETC

[coldrollformingmachine-blog]

Gypsum Channel Roll Forming Machine

Gypsum Channel Roll Forming Machine can roll form different type of Profile of Gypsum Board Profile without changing Roll Tolls. The thickness of Profile, height and width are adjustable and fully controlled by the computerized control Panel. All you need is just key in sizes and press the control button and then machine will automatically adjust the rollers according to your requirement. The time during adjusting roll Tools is around 2 minutes without changing and rollers. After roll formed by this Gypsum Board roll forming machine, the surface will be very smooth without any scratch. So, that is a spatiality of Gypsum Channel roll forming machine.

Gypsum Channel Roll Forming Machine Specification

A) De coiler 1 ton cap.

B) Entry Gate with

C) Roll Forming Line with 8 stations, 1 Gear Boxes & 5 H.P. electrical.

D) Control Panel semi auto

E) Cutting Unit

TECHNICAL SPECIFICATIONS :- ( Plate body) (5 Profiles )

(ceiling , perimeter ,Inter , Angle , Retaining )

Maximum sheet width that can be formed : 650 mm

Maximum sheet thickness in G I Strips that can be formed : 0.8 mm

Horizontal distance between shafts : 190 mm

Number of forming stations : 8 nos.

Vertical station - : 4 nos.

Total HP for Line : 5 (ABB)

Speed of the machine : 5 mt/minute

Size of machine : 2000 x 1200 x 1100 mm

MANDREL UNCOILER

Coil weight : 1 MT Max

Coil width : 800 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

à Description of the Roll Forming Machine. (5 Profiles )

Entry Gate Entry gate will be provided for movement of sheet to roll former.

Main Base The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 55 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 5 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit

Hydro press (with dais 6 Pieces. )

GEAR BOX – ELECON

Motor – ABB

Bearing –SKF

[coldrollformingmachine-blog]

Pop Channel Making Machine

First time in India we are introduce 4 profiles Pop Channel roll forming machine from that machine you can produce 4 different kind of profile in one machine. This machine can form it 4 different profiles in one machine these products are manufactured by using hi-tech machinery and advanced technology in order to use the best quality raw material and high tensile steel. Reduce scrap rigid and stable base design is the useful feature of these products. These machines are constructed by using the steel shafts and they are running between the iron housing. These machines are automatic and are easy to use. These products are available at reasonable prices as per the need of the clients and we also can make it custom roll forming machine as per profile drawing.

A) D coiler 1 ton cap.

B) Punching press,

C) Entry Gate with

D) Roll Forming Line with 16 station , 8 Gear Boxes & 15 H.P. electrical.

E) Control Panel semi auto

F) Cutting Unit (Hydro.)

TECHNICAL SPECIFICATIONS :-

Maximum sheet width that can be formed : 350 mm

Maximum sheet thickness in CRCA Strips that can be formed : 2.5 mm

Number of forming stations : 16 nos.

Vertical station - : 8 nos.

Total HP for Line : 21.5

Speed of the machine : 4 mt/minit

Size of machine : 7200 x 1200 x 1100 mm

MANDREL UNCOILER

Coil weight : 1 MT Max

Coil width : 400 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjuste

à Description of the Roll Forming Machine.

Feeder

3 Hp Pneumatic

Punching press

20 tone power press

Entry Gate Entry gate will be provided for movement of sheet to roll former.

Main Base The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 15HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit ( Hydro.)

Hydraulically operated power pack along with cutting die with 5 HP electrical.

Motor - ABB , Gear box – Elecon , Bearing - SKF

[coldrollformingmachine-blog]

We are involved in manufacturing and Exporter accurately Ceiling Channel Roll Forming Machine. These products are mainly used for structure purposes in diverse industries. The entire range is fabricated using high quality raw materials at our modern and well-equipped manufacturing facility. We have a ability to produce bulk needs of ceiling section of customer within the specific time frame.

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 stations, 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1250 mm

Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 16 nos.

Total HP for Line : 8

Speed of the machine : 10 -14 mt / mint

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1250 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

[coldrollformingmachine-blog]

We offering you to an outstanding quality range of Door Frame Roll Forming Machine. These Door Frame Roll Forming Machines can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.

De coiler 2 ton cap.

Entry Gate with

Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : ( Plate body)

Maximum sheet width that can be formed : 600 mm

Maximum sheet thickness in G I Strips that can be formed : 1 mm

Vertical distance between shafts : 100 mm

Horizontal distance between shafts : 190 mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 5 (ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 600 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Cutting Unit

Hydro press (with dais 4 set )

GEAR BOX – ELECON

Motor – ABB

Bearing -SKF

[coldrollformingmachine-blog]

The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.

De coiler 2 ton cap.

Entry Gate with

Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 600 mm

Maximum sheet thickness in G I Strips that can be formed : 1 mm

Vertical distance between shafts : 100 mm

Horizontal distance between shafts : 190 mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 600 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Feeder

Shaft Dia. - 60 mm

Inner - 200 mm

Material - EN 31

Motor H.P. - 1

Gear box - 1

Cutting Unit

10 tone Power press (with dais 2 set)

GEAR BOX – ELECON

Motor – ABB

Bearing -SKF

[coldrollformingmachine-blog]

Drywall roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building's wall. Drywall stud roll forming machine is the essential for its production.

De coiler 2 ton cap.

Entry Gate with

Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 600 mm

Maximum sheet thickness in G I Strips that can be formed : 1 mm

Vertical distance between shafts : 100 mm

Horizontal distance between shafts : 190 mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 5 (ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 600 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Cutting Unit

Hydro press (with dais 4 set )

GEAR BOX – ELECON

Motor – ABB

Bearing -SKF

[coldrollformingmachine-blog]

Gurukrupa Industries manufacturing best quality POP Channel Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensures precise performance, easy operation and higher efficiency. These machines are available with 'manually' as well as 'automatically control' panel.

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 stations, 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1250 mm

Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 16 nos.

Total HP for Line : 8

Speed of the machine : 10 -14 mt / mint

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1250 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

[coldrollformingmachine-blog]

D coiler 2 ton cap.

Entry Gate with

Roll Forming Machine with 12 station , 1 Gear Boxes & 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1550mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Horizontal distance between shafts : 400mm

Number of forming stations : 12 nos

Vertical station : 11 nos

Total HP for Line : 13

Speed of the machine : 7 mt./minute

Size of machine : 6500 x 1100 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 1200 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Motor-ABB

Gear box - Elecon

Bearing - SKF

[coldrollformingmachine-blog]

The C & Z purlin roll forming machine is making many types of purlin in one machine only you can change a roller. The whole Manufacturing Process is mainly consists of decoiler, coil sheet pulling down tools, roll forming machine, punching Press, cutting press, hydraulic press, and plc control Panel.

The C & Z purlines formed by this roll forming machine have outstanding anti-bending property and are easy to install. They are widely used as the supporter wall in factory, warehouse

D coiler 5 ton cap.

Punching press 20 tone 2 nos.

Entry Gate with

Roll Forming Line with 14 station , 7 Gear Boxes & 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 350mm

Maximum sheet thickness in CRCA Strips that can be formed : 3 mm(M.S.)

Horizontal distance between shafts : 400mm

Number of forming stations : 14 nos

Vertical station : 12 nos

Total HP for Line : 16

Speed of the machine : 4mt/minit

Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

Coil weight : 10 MT Max

Coil width : 400 MM

Coil bore : 450 MM min, 510 MM max dia

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

Z Purlin Roll Forming Machine

We are the prominent Manufacturer & Exporter of Z Purlin Roll Forming Machine that is made by using the premium quality Equipment. Our Z Purlin Roll Forming Machine is inflexibly checked to ensure the high performance and long life Durability. This Z Purlin Roll Forming Machine is widely used as the supporter of roof and wall ceiling in construction segment, such as Many Industries, Godown , trade fair centers. Z shape purlins are made from hot cold roll tools and straighten, hole punched, cut to length,and roll former. You can Form different kind of profile in this machine.

D coiler 2 ton cap.

Punching press 20 tone 2 nos.

Entry Gate with

Roll Forming Line with 14 station, 7 Gear Boxes & 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 450mm

Maximum sheet thickness in CRCA Strips that can be formed : 2 mm(M.S.)

Horizontal distance between shafts : 400mm

Number of forming stations : 14 nos.

Vertical station : 12 nos.

Total HP for Line : 16

Speed of the machine : 4mt/minit

Size of machine : 6300 x 1200 x 1000 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 400 MM

Coil bore : 450 MM min, 510 MM max dia

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

We are one of the leading organization occupied in providing brilliant quality C Purlin Roll Forming Machines, which are producing by using high grade material.we designed a lots kinds of C & Z purlin roll forming machine. due to the high graded superiority and our client fulfillment,The product by C&Z purlin roll forming machine has many benefit such as beautiful and colorful outside, light weigh, long life durability. It was widely used in every corn world wide. we can develop special C Purlin Roll Forming Machine as per customer requirement.

D Coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 14 station , 7 Gear Boxes & 10 H.P. electrical.

Power press 20 tone,

Feeder

Control Panel semi auto (servo and proxy)

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 170mm

Maximum sheet thickness in CRCA Strips that can be formed : 2mm

Horizontal distance between shafts : 350mm

Number of forming stations : 18 nos

Vertical station : 7 nos

Total HP for Line : 17

Speed of the machine : 3.5mt/minit

Size of machine : 5700 x 1000 x 1100 mm

Mandrel Uncoiler

Coil weight : 1 MT Max

Coil width : 400 MM

Coil bore : 450 MM min, 510 MM max dia

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Feeder

Shaft Dia. - 60 mm

Inner - 200 mm

Material - EN 31

Motor H.P. - 1

Gear box - 1

Punching Press

Capacity - 20 tone

Motor H.P. - 3

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

[coldrollformingmachine-blog]

We are among the leading names in industry, engaged in Producing an exclusive range of Trapezoid Roll Forming Machine. We have developed our machine as per the industry standards. Owing to their easy manufacturing process, excellent performance and effective solutions, these machines are widely appreciated.

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 stations, 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1250 mm

Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 16 nos.

Total HP for Line : 8

Speed of the machine : 10 -14 mt / mint

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1250 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

[coldrollformingmachine-blog]

We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Roof Tile Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantaly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofsof buildings.

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 station , 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1450 mm

Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 18 nos.

Total HP for Line : 15

Speed of the machine : 10 -14 mt / minute

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1450 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

We are indulged in the manufacturing and exporting of Corrugated Sheet Roll Forming Machine. These products are designed to reduce man power and stable steel base design. These machines are used in industrial sectors and are available in market at Compititive Rates. These products equipped with various features including en31 material hafts, elecon gear box , abb motors and more. This forming line has no limit on processing length; you can set a program on the computer control according to your requirement

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 stations, 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1250 mm

Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 16 nos.

Total HP for Line : 8

Speed of the machine : 10 -14 mt / mint

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1250 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

We offering finest quality Steel Frame Roll Forming Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.

De coiler 2 ton cap.

Entry Gate with

Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 175mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 90 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

One of the most common uses for a Stud Track Roll Forming Machine is for the Producing of steel stud and Channel. With inflexible web and flange heights these industrial stud makers can produce virtually all of the standard stud and track sizes used in Worldwide Market.

De coiler 2 ton cap.

Entry Gate with

Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 600 mm

Maximum sheet thickness in G I Strips that can be formed : 1 mm

Vertical distance between shafts : 100 mm

Horizontal distance between shafts : 190 mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 5 (ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 2 MT Max

Coil width : 600 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Cutting Unit

Hydro press (with dais 4 set )

GEAR BOX – ELECON

Motor – ABB

Bearing -SKF

[coldrollformingmachine-blog]

We provide you the fully automatic T Grid Roll Forming Machine with punching of T-bars in the various models and Forming sizes. Our manufacturer is one of the earliest one in India to develop the main T grid roll forming machines. So we have ability to design custom t grid roll forming machines according to customer sample or profile drawings.

D coiler 500 Kg. cap.

Entry Gate with

Roll Forming Line with 20station , 5 Gear Boxes & 8 H.P. electrical.

Control Panel auto

Cutting Unit (hydro. )

Technical Specifications

Maximum sheet width that can be formed : 100 mm

Maximum sheet thickness in Strips that can be formed : 0.6 mm

Horizontal distance between shafts : 200mm

Number of forming stations : 16 + 5 nos.

Vertical station : 6 nos.

Total HP for Line : 5 + 3

of the machine : 4 mt/minit

Size of machine : 2500 x 900 x 1000 mm + 1500x900x1000mm

Mandrel Uncoiler

Coil weight : 500 kg Max

Coil width : 150 MM

Coil bore : 470 MM min, 520 MM max dia.

Mandrel movement : manually

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 45mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 8 HP motor

Tooling

One set of Tooling with WPS grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining, hardning and inspection with final template for above.

Cutting Unit (Hydraulic.)

Cutting press with dais

Line sequence

D coiler

Feeder

Forming

D coiler

Forming

Cutting