Kensun

@davidhoffmankensun-blog

313 posts

H15

H15 is a dual filament bulb. It is used for the high beams (2013-2017 Mercedes GLA and 2010 Volkswagen Wagon with OEM halogen bulbs). There are 4 options for those of you who would like to upgrade the lights. We offer Single beam kits and Low Xenon/DRL Halogen in 35W and 55W options. Daytime Running Lights increase the safety while you are on the road. They give an opportunity to other drivers to see you on the road. H15 HID lights are much brighter than halogen bulbs. Even with the 35W HID kit, you will definitely increase the night vision. Make your car looking luxury during the day and safe during the nighttime.

Contributed by:https://kensun.com/collections/h15

H13 (9008)

H13 is a dual-filament bulb which is used for both: high and low beams (2004-2012 Nissan Sentra and 2007-2017 Jeep Patriot). Most OEM lights are not bright enough and the car enthusiasts need to drive in the dark. Kensun offers you upgrading to HID or LED lights for better visibility and your safety.

Thousands of people are choosing HID kits since there is a number of available options. First of all, we should mention that there are single and dual beam kits. With the first one, you can upgrade only one beam (high or low), while with the dual beam kit you will get both beams upgraded. This depends on the model of your vehicle and the type of the housing it has. With Bi-Xenon kit you are getting high and low beams Xenon, as one bulb is used for both lights. When speaking about the Low Xenon/High Halogen kit, you will get upgraded low beams (Xenon), while the high beams will be halogen just like your factory bulbs.

In case you would like to try something different from the HIDs, have a look at Kensun LED kits. There are two available options to choose from. Pay attention to our newly designed LED kit withETI Chips. Their Arc-beam lens technology provides crystal clear light without short beams and dark spots on the road. The other LED option is the kit with Cree Chips. The most attractive feature of it is an availability of color filters which come in a set. You can experiment and try different color options to get the lights you would love.

Contributed by:https://kensun.com/collections/h13

H12 (9040,9045,9055)

H12 size is usually used to convert the fog lights (1999-2002 Jeep Laredo, Limited and 2006-2011 Cadillac DTS). It may fit the following sizes: 9040, 9045, 9055. H12 is available only for HID systems. Choose one of two available sets: 35W and 55W. 35W kit produces more light than your factory halogen bulbs and increases the vision significantly. A wide color range gives you more options to choose from. The most popular colors for the fog lights are 3000-6000K. Yellow lights (3000K) are suitable for bad climate because this color can cut through air moisture as compared to the white light. It is perfect for foggy, snowing and raining conditions.

Contributed by:https://kensun.com/collections/h12

H11

H11 bulb size is commonly used for the low beams and fog lights. Kensun offers H11 LED and HID kits. We have H11 LED sets with Cree Chips. These bulbs are designed with the removable locking rings to make the installation easier, so you can fix it in the housing at first and then lock the bulb in. H11 LEDs with ETI Chips come with fixed locking rings. These lights have arc beam covers to provide better light emission. Kensun LED bulbs have 3cm heat sinks with the fan. That is why the cooling system requires additional space behind the headlight assembly to operate properly.

There are several options of the HID kits. You can find H11 and H11B sizes. The bulb bases are similar, though there is a difference in the return wire position. The H11 bulb has return wire on the top when installed to the headlight housing, while H11B on the bottom. The reflector housing can take both bulbs and there will not be issues with the light output. As for the projectors, it is important to have H11B. With the return wire on the bottom, there should not be dark spots on the road which you may have with the H11 HID being installed to the projector housing.

Contributed by:https://kensun.com/collections/h11

H10 (9145)

An H10 size is a single filament bulb. It is usually installed to the fog lights (2001-2007 Ford Explorer Sport Trac and 2003-2006 GMC Sierra).

We know why the fog lights are that important and offer to upgrade them to HIDs or LEDs. Headlights can reflect off the snow and fog confusing the driver eyes so that he/she cannot see the road adequately. The fog lights were designed for use in conditions of limited visibility. They are separate units from the regular headlights.

Can you imagine that the HIDs are 3 times brighter than OEM halogen bulbs? Do not waste your time on this, just translate this into deeds. We know how tired and exhausted can be the road under bad weather conditions, that is why we are offering even 55W HID sets. They produce 20% more light than the 35W kits.

One of the other great possible upgrades is the installation of LEDs. These bulbs do not have ballasts as they operate on 8-48V. Bulbs have LED chips which are reliable and have a long lifespan. LEDs are the best option for the reflector housing. You may notice that there are 2 types of the kits. LED Kit with Cree Chips will be a great choice for those who are ready to experiment. It comes with a set of color filters and as a result, you have 3 color options (yellow, blue and white light output). When choosing the LED kit with ETI Chips you are getting a newly designed set with the pure white light output. These bulbs have drivers to power the chips and cooler separately.

Feel yourself safe on the road! Choose Kensun!

Contributed by:https://kensun.com/collections/h10

H4 (HB2) (9003)

H4 is a twin filament bulb used for the high and low beams (2002-2007 Suzuki Aerio Sedan and 2014-2017 Toyota Tundra).

You cannot see further than the headlights and you can do the whole trip that way. But there is no need to put up with this. Discover the advantage of night visibility withKensun Conversion kits.

When looking at H4 HID Kensun kit you will find out that there are several available types of them. Single beam H4 HID kit performs for the one beam and can be installed to the high or low beams on the vehicle. The other options are dual beam kits: Low Xenon/High Halogen and Bi-Xenon. You will replace both high and low beams installing one of these kits. Low Xenon/High Halogen kit will provide you with the Xenon lights on the dims while the brights will be just the same as your OEM halogen bulbs. Installing a Bi-Xenon kit you are upgrading high and low beams to Xenon lights.

All these three types of the kits are available in different wattage (35W and 55W) and colors.

If you are not a HID stickler, Kensun has LED kits for you. You can find LEDs with Cree Chips. These lights are brighter than OEM halogens and last longer. One of the most interesting features of this kit is that it comes with the pair of color filters so you can experiment with color output and find the favorite one.

The other option for LED lovers is a kit with ETI Chips. Owing to its newest design, the light emits through 360◦ so you can forget about the issue with dark spots and short beams on the road.

Contributed by:https://kensun.com/collections/h4

H3C

An H3C is a single filament bulb, shorter than an H3 and the one which is usually installed in the fog lights. Do not lose the chance and upgrade the lights right now! Kensun offers 2 types ofHID kits. Why HIDs? Xenon lights are 3 times brighter than your factory halogen bulbs. Even with the 35W kit installed you can feel the difference. The 55W sets are available also. They are 20% brighter than 35W kits. The other feature of the HIDs is that they are using 35% less power than OEM halogen lights. You will be pleasantly surprised with the variety of available colors. If you are looking for something extraordinary, you can choose Green or Pink lights.

Contributed by:https://kensun.com/collections/h3c

H3

H3 is a single filament bulb with a PK22S base which is mostly used for the fog lights. It is a well-known fact that these lights are especially important in snowing, raining and foggy weather.

Kensun offers you upgrading the lights with the HID or LED set. HIDs produce 3 times more light, using 35% less power than halogen bulbs. Have a look at 35W and 55W kits and the wide range of color options which are available. No need to endure low visibility!

H3 HID bulbs have a power wire which comes with 2 leads (ground and power). On factory H3 headlight assemblies you may have only power socket. That is why you need to connect the positive to the socket and negative to any ground on your vehicle (there may be a spade connector from inside the headlight housing).

The other option is LED Conversion kit. What is the advantage of it? First of all, this type of the bulbs is durable and tend to last longer than HIDs. The LEDs do not require special time for warming up, but are 'instant on'. One more characteristic of the LEDs is that they have small chips which cannot break.

Contributed by:https://kensun.com/collections/h3

H1

H1 bulb is a single beam bulb, mostly used for the fog lights (1999-2005 Saab 9-5) and can be installed to the low and high beams (1999-2005 Volkswagen Beetle). ChooseKensun H1 LED or HID Conversion kit.

You get up to 3 times brighter lights with an installed HID kit rather than with OEM halogen bulbs. You can get even more light with 55W HID kit. Tastes differ, that is why we are offering different color options to choose from.

H1 size is also available for LED kit. LEDs are well known for their long lifespan. These bulbs have small chips which cannot break. They are durable and tend to last longer than HIDs.

Some H1 bulbs may require holders so that the bulb can be properly installed to the housing. Kensun H1 bulbs are straight and should be held in the place by a spring clip. Mostly, factory assemblies may require holders, as they come with a spring clip. Some aftermarket housings have a twist-in base that is why the holders with springs are needed.

HID and LED bulbs of H1 sizes have power wire which comes with 2 leads (power and ground). On factory H1 headlight assemblies you may have only power socket. Therefore, you need to connect the positive to the socket and negative to any ground on your vehicle (there may be a spare connector from inside the headlight housing).

EXTRA ACCESSORIES

We care about your comfort as we understand how it is important to feel good especially being on the road for a long time. Accessories protect you, make the driving easier and add a touch of personal style.

Imagine that in the morning, you can get in the car and listen to your favorite music on a stereo system with the help of the Bluetooth Car kit while on the road. This will bring you the refreshment of the favorite music.

You will have an opportunity to enjoy each sip of your drink which can be kept hot during the trip with our Thermos Mug. Lid will not allow you to spill even a drop of your gorgeous drink and your favorite t-shirt will not be stained.

Even in the dead of winter, you will be warm using our Over- and Under Seat Warmers. We have options for drivers and passengers also, as Kensun offers warmers for both: front and back seats.

During long trips, we commonly use gadgets a lot. At this point, the Power Inverter is a great helper. With this device, your iPod and phone will be charged even while you are driving.

We do not forget about all pets big and small. There is a special offer for their owners: Pet Booster. It can be used like a carrier bag and car booster seat loop. It is available in 2 colors and 3 different sizes.

Kensun makes the driving comfortable, as we offer a wide range of products that correspond to the needs of auto enthusiast: interior lights, power banks, power inverters and many other things.

Your ride has never been easier than with Kensun assortment of extra accessories for your vehicle. Try them out right away!

Contributed by:https://kensun.com/collections/extra-accessories

D4

A D4 is a size of factory HID bulb. It is a newer version of D2 (S/R) bulb and does not contain mercury. The D4 lights operate on 42V while D2 require 85V. D4 and D2 bulbs should be used with corresponding ballasts. Two systems cannot be mixed.

We have HID D4R and D4S replacement bulbs available in 12 different colors. D4R Xenon lights should be installed to the reflector headlight housing since they gave a painted section. This helps to block light output to a part of the headlight housing to create a safe pattern. The D4S bulbs do not have painted sections since there is a shield inside the projector housing.

The other option is an LED kit. These lights do not require ballasts that is why they should be removed firstly. This installation may require professional skills.

Contributed by:https://kensun.com/collections/d4

D3

D3 bulbs are the newest version of D1 HIDs. These bulbs are installed in the vehicles like factory lights. The D3 bulbs operate on lower voltage and cannot replace the D1 and vice versa. Connectors on bulbs igniters differ, so avoid using the excessive force. Kensun offers D3 replacement bulbs which can be used with OEM ballasts. There are options for projector and reflector housings. The D3R bulb is designed with painted section to block part of the light output so they can be used in the reflector housing. The D3S bulbsdo not have any painted section but can be installed to the projector housing. There is a shield inside the housing itself.

Kensun offers the LED kits. These lights are durable and do not require the ballasts. In the case of purchasing the LED set, OEM ballasts should be removed. Professionalinstallation may be needed.

Contributed by:https://kensun.com/collections/d3

LED H13 (9008) Dual Beam Conversion Kit with Cree Chips

#1 CUSTOMER SERVICE & QUALITY 2 YEAR WARRANTY

LED Headlight Bulbs Conversion Kit

§ Easy and Simple installation. Usually takes less than 20 minutes! Literally "Plug-and-Play" in most vehicles with no resistors or extra wiring. Some vehicles may need professionalinstallation.

§ Includes: smart aluminum carry-case; pair of 40W 4000LM super-bright performance led bulbs with a 500m range and a lifespan of over 30000 hrs.; water-proof IP68 and heat-protected with integrated cooling chip and fan for heat dissipation. 2 extra color filters (yellow and blue tint). The LED chips are Cree made in the USA

Contributed from:https://kensun.com/products/led_kit_h13_regular_with_cree_chips

LED H11 Conversion Kit with Cree Chips

#1 Customer Service & Quality / 2 Year Warranty

LED Headlight Bulbs Conversion Kit

§ Easy and Simple installation. Usually takes less than 20 minutes! Literally "Plug-and-Play" in most vehicles with no resistors or extra wiring. Some vehicles may need professionalinstallation.

§ Includes: smart aluminum carry-case; pair of 30W 3000LM super-bright performance led bulbs with a 500m range and a lifespan of over 30000 hrs.; water-proof IP68 and heat-protected with integrated cooling chip and fan for heat dissipation. 2 extra color filters (yellow and blue tint). The LED chips are Cree made in the USA

Contributed from:https://kensun.com/products/led_kit_h11_regular_with_cree_chips

LED H10 (9145) Conversion Kit with Cree Chips

#1 CUSTOMER SERVICE & QUALITY 2 YEAR WARRANTY

LED Headlight Bulbs Conversion Kit

§ Easy and Simple installation. Usually takes less than 20 minutes! Literally "Plug-and-Play" in most vehicles with no resistors or extra wiring. Some vehicles may need professionalinstallation.

§ Includes: smart aluminum carry-case; pair of 30W 3000LM super-bright performance led bulbs with a 500m range and a lifespan of over 30000 hrs.; water-proof IP68 and heat-protected with integrated cooling chip and fan for heat dissipation. 2 extra color filters (yellow and blue tint). The LED chips are Cree made in the USA

Fits sizes:https://kensun.com/

§ 9140 9145 9155

Contributed from:https://kensun.com/products/led_kit_h10_regular_with_cree_chips

LED H9 Conversion Kit with Cree Chips

#1 CUSTOMER SERVICE & QUALITY / 2 YEAR WARRANTY

§ Easy and Simple installation. Usually takes less than 20 minutes! Literally "Plug-and-Play" in most vehicles with no resistors or extra wiring. Some vehicles may need professional installation.

§ Includes: smart aluminum carry-case; pair of 30W 3000LM super-bright performance led bulbs with a 500m range and a lifespan of over 30000 hrs.; water-proof IP68 and heat-protected with integrated cooling chip and fan for heat dissipation. 2 extra colorfilters (yellow and blue tint). The LED chips are Cree made in the USA

Contributed from:https://kensun.com/products/led_kit_h9_regular_with_cree_chips

LED H8 Conversion Kit with Cree Chips

#1 CUSTOMER SERVICE & QUALITY / 2 YEAR WARRANTY

§ Easy and Simple installation. Usually takes less than 20 minutes! Literally "Plug-and-Play" in most vehicles with no resistors or extra wiring. Some vehicles may need professionalinstallation.

§ Includes: smart aluminum carry-case; pair of 30W 3000LM super-bright performance led bulbs with a 500m range and a lifespan of over 30000 hrs.; water-proof IP68 and heat-protected with integrated cooling chip and fan for heat dissipation. 2 extra color filters (yellow and blue tint). The LED chips are Cree made in the USA

Contributed from:https://kensun.com/products/led_kit_h8_regular_with_cree_chips

Kensun @davidhoffmankensun-blog - Tumblr Blog | Tumgag