Untitled

[elite-offshore]

Magnetic Compass – Air Bubble Removal Process: 

A ship’s magnetic compass works properly only when it’s filled with liquid and free of air bubbles. Sometimes, due to heat, movement, or minor leaks, air bubbles can form inside the compass bowl. These bubbles can affect the compass reading and must be removed. 

Here’s how the air bubble is removed: 

Check the Compass: Look through the glass dome and confirm the presence of an air bubble inside the compass liquid. 

Locate the Filling Plug: Most compasses have a small filling plug or screw on the top or side. This is used to add compass fluid and remove air. 

Open the Plug Carefully: Unscrew the filling plug slowly to avoid sudden pressure release. Make sure the ship is stable during this process. 

Add Compass Liquid: Use the recommended compass fluid (usually alcohol-based or a special mineral oil) and slowly fill it through the plug until the air bubble disappears. 

Re-seal the Plug: Once the bubble is gone, securely tighten the plug to prevent future leaks. 

Clean and Re-check: Wipe off any excess fluid and check the compass again to ensure there are no bubbles left. 

Note: Always use the right type of fluid and follow safety precautions. If unsure, the task should be done by a trained compass adjuster. 

This simple maintenance keeps the compass reliable and accurate during navigation. 

For a full course on "Ship's Magnetic Compass Adjuster", write to [email protected].

[elite-offshore]

Tight Access Crane Operator training by Elite Offshore Pvt Ltd Elite Offshore Pvt Ltd offers comprehensive Tight Access Crane Operator training designed for individuals aiming to master crane operations in confined or restricted spaces. This specialized course equips operators with the skills to safely maneuver cranes in tight environments commonly found on offshore platforms, urban construction sites, and industrial facilities.

Through hands-on training and expert instruction, participants will learn essential techniques for precision lifting, load control, and hazard management, all crucial for tight access operations. The course covers key topics, including crane setup and positioning, risk assessment, load weight calculations, boom control, and safety regulations specific to confined space operations. Trainees also receive guidance on working around obstacles, understanding load charts, and selecting the correct lifting equipment for challenging spaces. Elite Offshore’s Tight Access Crane Operator course is suitable for both new operators and experienced professionals looking to expand their capabilities in high-stakes environments. With a focus on safety, efficiency, and adherence to industry standards, this training ensures that operators are prepared to manage complex lifts with confidence. Join Elite Offshore Pvt Ltd to elevate your crane operation skills and gain a competitive edge in the offshore and construction industries! Explore more at https://eliteoffshore.in/home/course/.... https://eliteoffshore.in write to [email protected] Call [phone]

[elite-offshore]

Confined Space Entry (CSE) Training at Elite Offshore

[elite-offshore]

Importance of Magnetic Compass Adjustment Aboard Ships

Navigating the vast and unpredictable oceans has been a hallmark of human exploration and commerce for centuries. From ancient seafarers guided by the stars to modern maritime professionals relying on sophisticated technology, one instrument has stood the test of time as a fundamental tool of navigation: the magnetic compass. Despite advancements in electronic navigation systems like GPS, the magnetic compass remains indispensable, serving as a reliable backup and essential tool for maintaining course and ensuring the safety of ships at sea.

The Magnetic Compass as the Foundation of navigation

The magnetic compass is a simple yet ingenious device that aligns itself with the Earth's magnetic field, indicating the direction of magnetic north. This fundamental principle has guided sailors and explorers across oceans and continents, providing a constant reference point even in the absence of visible landmarks or celestial cues.

On modern ships, the magnetic compass continues to play a crucial role alongside Gyro Compass which is an electronic navigation aid. Its importance lies not only in its simplicity and reliability but also in its regulatory requirement aboard all vessels, ensuring compliance with international maritime laws and safety standards.

Understanding Magnetic Compass Adjustment

To appreciate the significance of magnetic compass adjustment, it is essential to understand the factors that affect its accuracy. The Earth's magnetic field is not uniform, and onboard magnetic influences from the ship's structure and equipment can cause deviations, known as compass errors. These errors can lead to inaccuracies in directional readings, potentially jeopardizing safe navigation. The two main errors experienced are known as Deviation and Variation.

Magnetic compass adjustment, also known as compass swinging or compass compensation, involves techniques to minimize these errors and ensure the compass provides accurate readings. This adjustment process is critical for several reasons:

1. Safety and Reliability

The primary reason for magnetic compass adjustment is to enhance the safety and reliability of navigation at sea. Imagine a scenario where electronic navigation systems fail due to a technical glitch or a cyber-attack. In such situations, the magnetic compass becomes the primary means of determining the ship's heading. Ensuring its accuracy through regular adjustment is crucial for maintaining course and avoiding navigational hazards.

2. Compliance with International Regulations

International maritime regulations, including those established by the International Maritime Organization (IMO), mandate that all vessels must have properly adjusted and calibrated magnetic compasses. These regulations are designed to ensure uniform standards of safety and operational competence across the global maritime industry.

3. Reducing Compass Deviation and Variation

Compass deviation refers to the discrepancies between the magnetic compass readings and the actual direction of true north. This deviation can be caused by various factors, such as the presence of ferrous metals, electrical equipment, and magnetic anomalies aboard the ship. Without proper adjustment, these deviations can lead to navigational errors, potentially resulting in course deviations, collisions, or groundings.

Through meticulous adjustment techniques, compass adjusters mitigate these deviations by compensating for onboard magnetic influences. This process involves carefully measuring and calculating the effects of deviation on the compass readings and applying corrections to ensure accuracy.

The Variation is the difference between the magnetic north your compass points to and true north. – This difference is caused by the Earth's magnetic field. This error is fixed for a particular location on earth and varies with time. This error is mentioned on the chart and need so be applied while making compass adjustments.

4. Enhancing Navigation Efficiency

In today's maritime industry, where efficiency and precision are paramount, accurately adjusted magnetic compasses contribute to efficient navigation operations. They provide reliable directional information that complements electronic navigation systems, offering redundancy in case of system failures or emergencies.

Moreover, for vessels navigating in regions with limited GPS coverage or where electronic navigation aids are unreliable, a well-adjusted magnetic compass remains an invaluable asset. It serves as a dependable backup, ensuring continuous navigation capability regardless of external conditions.

5. Professional Competence and Skill Development

For maritime professionals, proficiency in magnetic compass adjustment is important and crucial. It demonstrates a thorough understanding of navigational principles and the ability to apply them effectively in real-world scenarios.

Courses and training programs, such as those offered by institutions like Elite Offshore, play a pivotal role in equipping compass adjusters with the knowledge and practical skills needed to perform their duties competently. These programs cover a wide range of topics, including the theory of magnetism, adjustment techniques, regulatory requirements, and practical hands-on sessions using specialized equipment.

The importance of magnetic compass adjustment aboard ships cannot be overstated. It serves as a foundational element of maritime navigation, ensuring the safety, compliance, and efficiency of vessels navigating the world's oceans. Through rigorous training, adherence to international regulations, and meticulous adjustment techniques, maritime professionals uphold the standards of navigational excellence that have defined the industry for centuries.

[elite-offshore]

Industrial Safety Shoes: A crucial component of a Personal Protective Equipment (PPE) Kit

In any industrial environment, safety should always be a top priority. One important aspect of workplace safety is proper footwear, which is

[elite-offshore]

The offshore oil and gas industry is a high-stakes field requiring rigorous training and certification to ensure safety, efficiency, and regulatory compliance. One of the most crucial roles within this industry is that of the Offshore Installation Manager (OIM). The OIM is responsible for the overall management of offshore installations, encompassing everything from safety and operations to crew welfare and emergency response. Elite Offshore, a leading training provider, offers a comprehensive Liberia flag-approved OIM training program designed to meet the highest standards set by the International Maritime Organization (IMO) and other regulatory bodies.

Importance of OIM Training

The role of an OIM is multifaceted and demanding. Effective training is critical to ensure that OIMs possess the necessary skills and knowledge to manage offshore installations safely and efficiently. The training program by Elite Offshore not only meets regulatory requirements but also provides participants with hands-on experience and real-world scenarios to enhance their learning.

Duties and Responsibilities of an OIM

The Offshore Installation Manager holds a pivotal role in the offshore industry. Their duties and responsibilities are diverse, encompassing several critical areas: Safety Management

1. Ensuring Safety Compliance: The OIM is responsible for ensuring that all operations comply with safety regulations and standards. This includes regular safety drills, inspections, and adherence to safety protocols.

2. Risk Assessment and Mitigation: Conducting risk assessments and implementing measures to mitigate identified risks. The OIM must be proactive in identifying potential hazards and taking steps to prevent accidents.

3. Emergency Response Coordination: In the event of an emergency, the OIM coordinates the response, ensuring that all personnel are aware of their roles and responsibilities. This includes managing evacuation procedures and liaising with rescue services.

Operational Management

1. Overseeing Operations: The OIM oversees all operations on the installation, ensuring that they are carried out efficiently and safely. This includes drilling, production, and maintenance activities.

2. Resource Management: Managing resources, including personnel, equipment, and supplies, to ensure that operations run smoothly. The OIM must balance the needs of different departments and prioritize tasks effectively.

3. Maintenance Oversight: Ensuring that all equipment and systems are properly maintained and operational. This includes scheduling regular maintenance and addressing any issues promptly to prevent downtime.

Personnel Management

1. Supervising Crew: The OIM supervises the crew, ensuring that they are well-trained, motivated, and working safely. This includes conducting performance reviews, providing feedback, and addressing any issues that arise.

2. Training and Development: Overseeing the training and development of personnel, ensuring that they have the skills and knowledge required to perform their duties effectively.

3. Welfare and Morale: Ensuring the welfare and morale of the crew, addressing any concerns, and fostering a positive working environment. This includes managing accommodations, catering, and recreational facilities.

Regulatory Compliance

1. Adhering to Regulations: Ensuring that the installation complies with all relevant regulations and standards. This includes environmental regulations, health and safety standards, and industry best practices.

2. Record Keeping: Maintaining accurate records of all operations, incidents, and maintenance activities. These records are essential for regulatory compliance and for identifying areas for improvement.

3. Audit and Inspection: Preparing for and managing audits and inspections by regulatory bodies. The OIM must ensure that all documentation is up-to-date and that the installation is ready for inspection at all times.

Communication and Reporting

1. Liaising with Stakeholders: Communicating with stakeholders, including the installation owner, regulatory bodies, and other relevant parties. The OIM must provide regular updates on operations, safety, and any issues that arise.

2. Incident Reporting: Reporting incidents, near misses, and any other significant events to the appropriate authorities. This includes conducting investigations and implementing corrective actions to prevent recurrence.

3. Daily Reporting: Providing daily reports on operations, highlighting any issues or concerns, and outlining plans for the coming days.

Liberia Flag-Approved OIM Training by Elite Offshore

The Liberia flag-approved OIM training program offered by Elite Offshore is designed to meet the highest standards of the industry. The program covers all aspects of the OIM role, ensuring that participants are well-prepared to take on this critical position.

Training Program Content

The content of the training program is based on the guidelines set out in IMO Resolution A.1079(28), dated December 4, 2013. The resolution outlines the competencies required for OIMs, focusing on safety, operational efficiency, and regulatory compliance.

Certification and Accreditation

Upon successful completion of the Liberia flag-approved OIM training program, participants receive a certification that is recognized by the Liberia Maritime Authority. This certification demonstrates that they have met the highest standards of training and are qualified to take on the role of an OIM.

The Offshore Installation Manager (OIM) plays a crucial role in the offshore oil and gas industry, overseeing operations, ensuring safety, and managing personnel. Effective training is essential to prepare OIMs for the demands of their role, ensuring that they have the skills and knowledge required to manage offshore installations safely and efficiently.

[elite-offshore]

Wheel Loader Operator

Elevate your skills with Elite Offshore's Wheel Loader Operator Training. Master safety protocols, equipment operation, techniques and site

[elite-offshore]

Hydrogen Sulphide (H2S): Accidents and Prevention in construction industry

Hydrogen Sulphide Gas (H2S) accidents are not as common in the construction industry as in other sectors like oil and gas or wastewater trea

[elite-offshore]

Authorized Gas Tester (AGT) Training and Certification by Elite Offshore: Ensuring Safety in Industrial Environments

In industrial environments, particularly within the oil and gas sector, the presence of hazardous gases poses a significant risk to the safe

[elite-offshore]

Enhancing Expertise: The Liberia Approved Maintenance Supervisor/Chief Mechanic Course at Elite Offshore.  

Elite Offshore conducts comprehensive training program on the Liberia flag (LISCR) approved Maintenance Supervisor / Chief Mechanic Course. 

Maintenance Supervisor course is as per IMO Resolution A.1079(28) adopted on 4th Dec 2013. This course is applicable for non propulsion vessel such as Construction, Pipe-lay and Accommodation barges; Semisub and Jackup drilling units etc which use anchor to stay in position. Tailored to meet the evolving demands of the offshore industry, this course equips participants with the knowledge and skills necessary to excel in their roles as maintenance supervisors and chief mechanics. Elite Offshore's (https://eliteoffshore.in) commitment to excellence extends beyond its operational endeavors; it extends to nurturing talent and fostering professional growth within the industry. Designed by industry experts and approved by Liberia, a leading maritime authority, this course promises to elevate participants' capabilities to new heights.

 Course Contents: 

1. Fundamentals of Maintenance Supervision:   - Understanding the role and responsibilities of a maintenance supervisor.   - Effective communication and leadership skills.   - Resource allocation and scheduling techniques. 

 2. Mechanical Systems Overview:   - In-depth exploration of mechanical systems commonly found in offshore environments.   - Principles of operation, maintenance, and troubleshooting for engines, pumps, compressors, and more.   - Safety considerations and best practices when working with mechanical equipment. 

 3. Hydraulic and Pneumatic Systems:   - Comprehensive study of hydraulic and pneumatic systems and their components.   - Hands-on training in system design, maintenance, and repair.   - Practical exercises to reinforce learning and develop proficiency. 

 4. Electrical Systems and Instrumentation:   - Basics of electrical systems and instrumentation in offshore facilities.   - Diagnosis and troubleshooting of electrical faults.   - Safety protocols for working with electrical equipment in hazardous environments. 

 5. Preventive Maintenance Strategies:   - Importance of preventive maintenance in ensuring equipment reliability and longevity.   - Development and implementation of preventive maintenance plans.   - Use of advanced tools and technologies for condition monitoring and predictive maintenance. 

 6. Emergency Response and Safety Procedures:   - Preparation for emergency situations, including fire, gas leaks, and equipment failures.   - Role-specific responsibilities during emergencies.   - Simulation exercises and drills to simulate real-world scenarios and enhance response capabilities. 

 7. Regulatory Compliance and Documentation:   - Familiarization with relevant regulations and standards governing offshore maintenance operations.   - Documentation requirements for maintenance activities, inspections, and audits.   - Importance of compliance in ensuring safety, environmental protection, and regulatory adherence. 

 8. Soft Skills Development:   - Effective communication and interpersonal skills.   - Conflict resolution and problem-solving techniques.   - Time management and organizational skills. 

Advantages of the Course: 

1. Industry-Relevant Curriculum: The course content is carefully crafted to address the specific challenges and requirements of maintenance supervision and chief mechanic roles in the offshore industry, crafted as per IMO Resolution A.1079(28) adopted on 4th Dec 2013. 

 2. Practical Learning Experience: Participants benefit from hands-on training sessions and simulation exercises, allowing them to apply theoretical knowledge in real-world scenarios. 

 3. Professional Certification: Upon successful completion of the course, participants receive a Liberia-approved certification, validating their expertise and enhancing their career prospects. 

 4. Career Advancement Opportunities: The acquired skills and certification open doors to career advancement opportunities, including promotions to higher positions and greater responsibilities. 

 5. Enhanced Safety Awareness: Comprehensive training in emergency response and safety procedures equips participants with the skills and confidence to respond effectively to challenging situations, ensuring the safety of themselves and their colleagues. 

For any further information, please contact [email protected] or call [phone] or [phone]. 

You may visit our website https://eliteoffshore.in (for all courses) or https://ecademy.eliteoffshore.in (for e-learning courses). Visit our training centre at below address: 

Elite Offshore Pvt. Ltd. 

G- 5, Platform Level, Tower-3, Belapur Railway Station Complex, Sector-11, C.B.D. Belapur, Navi Mumbai-400614. Contact No. [phone], [phone], [phone] Email: [email protected] or [email protected]

[elite-offshore]

Fire Extinguisher Checklist: Key components

Having a checklist for fire extinguisher checks is crucial to ensure that no item to check is missed out during the course of checking the e

Having a checklist for fire extinguisher checks is crucial to ensure that no item to check is missed out during the course of checking the extinguishers. The fire extinguishers should always be in ready condition for use when required. To ensure this, it is essential that each aspect of the extinguisher's functionality and readiness is thoroughly examined.

Following are the key components of a checklist for monthly, annual, and periodical checks on a fire extinguisher. 

[elite-offshore]

A career as a crane operator can be quite lucrative and rewarding. However, this being a skill, depends on individual interest. Here are some factors to consider:

1. Crane operators are often in demand, especially in offshore, construction, shipping, and manufacturing industries. As infrastructure projects increase and construction continues to expand globally, the need for skilled crane operators remains steady.

2. Crane operators can earn a good income. Salaries vary based on factors such as location, experience, and type of crane operated, but generally, they can earn above-average wages.

3. Operating a crane requires specialized skills and training. As you gain experience and expertise, you may have opportunities to operate more advanced equipment or move into supervisory roles. The training for offshore Offshore Crane Operators are in 3 stages. It takes time to become an Offshore Crane Operator Stage 3 operator. Elite Offshore Pvt Ltd, based in Navi Mumbai, provides training and certification of crane operators for Mobile RT Crane, Offshore Crane, EOT Crane, Hydra & Farana etc. They also provide training and certification for Crane Inspectors. You may get in touch with them for more details..

4. As long as construction and related industries exist, crane operators will be needed. This provides a certain level of job stability, although economic fluctuations can affect demand to some extent.

5. Crane operators often work outdoors and in various weather conditions. They may also work at heights, which can be challenging for some individuals but exciting for others. The offshore crane operators work on offshore rigs. There are floating cranes with capacity in thousands of tonnes.

6. Operating heavy machinery like cranes comes with inherent risks. Safety protocols must be followed diligently to prevent accidents and injuries.

Thus a career as a crane operator can be fulfilling for those who enjoy working with heavy machinery, have a good sense of spatial awareness, and are committed to safety. It offers a combination of job stability, good pay, and opportunities for advancement for those willing to invest in training and gaining experience.

[elite-offshore]

Liberia approved Ballast Control Operator (BCO) and MOU Stability training

In the offshore operations, safety and expertise are paramount. Recognising this need, Elite Offshore Pvt Ltd started conducting many safety and skill courses as per demand of the offshore industry. The courses include BOSIET, HUET, H2S, HLO, HLA, HDA, Offshore Crane Operator, HERTM, HERTL etc. These courses are a general requirement of the industry. Ballast Control Operator (BCO) and MOU Stability training by Liberia is a course meant for the marine crew of non-propelled barges. This course trains people on the requirements of Ballast operations to maintain stability during normal or emergency operations. The course is a requirement by IMO resolution A-28-Res.1079. This specialized program is tailored to equip individuals with the crucial skills and knowledge required for effective ballast management and the maintenance of stability in Mobile Offshore Units (MOUs). The course offers an in-depth exploration of ballast system operations, stability principles, and emergency response procedures. Through a blend of theoretical instruction and practical training, participants learn to manage ballast operations efficiently, ensuring the stability and safety of vessels in various offshore conditions. Topics covered include the dynamics of ballast water, the impact on vessel stability, and the application of stability software tools. the training program covers: 1. Ballast Control Operations: Participants dive deep into the intricacies of ballast control, learning about principles, techniques, and best practices for maintaining vessel stability. Topics covered include ballast system components, ballasting and de-ballasting procedures, and emergency response protocols. 2. MOU Stability: Understanding the stability of Mobile Offshore Units is crucial for safe and efficient offshore operations. The training delves into MOU stability principles, stability calculations, and stability criteria compliance, equipping participants with the knowledge to ensure stability in various operational scenarios. 3. Regulatory Compliance: Elite Offshore's training program aligns with Liberia's regulatory requirements, ensuring that participants receive instruction that meets international standards and industry expectations. This compliance underscores the program's credibility and relevance in the maritime sector. Advantages of Elite Offshore's BCO and MOU Stability training: - Industry Expertise: Elite Offshore boasts a team of experienced instructors with extensive maritime knowledge, providing participants with invaluable insights and practical guidance. - Hands-On Learning: The training incorporates hands-on exercises and simulations, allowing participants to apply theoretical concepts in real-world scenarios, enhancing understanding and skill proficiency. - Career Advancement: Completion of Elite Offshore's accredited training program opens doors to career advancement opportunities in the maritime industry, enabling professionals to excel in their roles and contribute to safe offshore operations. - Global Recognition: With Liberia's approval, the training program has international recognition that increases the participant's marketability in the global maritime job market. Elite Offshore's Ballast Control Operator (BCO) and MOU Stability training offer a comprehensive pathway for professionals seeking to enhance their expertise and advance their careers in the maritime sector. With Liberia's stamp of approval, participants can trust in Elite Offshore's commitment to delivering top-tier training that meets the highest industry standards. For any further information, please contact [email protected] or call [phone] or [phone]. You may visit our website https://eliteoffshore.in (for all courses) or https://ecademy.eliteoffshore.in (for e-learning courses). Visit our training centre at below address: Elite Offshore Pvt. Ltd. G- 5, Platform Level, Tower-3, Belapur Railway Station Complex, Sector-11, C.B.D. Belapur, Navi Mumbai-400614. Contact No. [phone], [phone], [phone] Email: [email protected] or [email protected]

[elite-offshore]

This video explains the course details and contents of Liberia approved Barge Supervisor (BS) / Barge Master Course conducted by Elite Offshore. Elite Offshore, a renowned name in maritime training and certification, conducts the Liberia Approved Barge Supervisor/Barge Master Course. This offering aims to equip aspiring professionals with the skills and knowledge needed to excel in the dynamic world of offshore operations. Designed to meet the rigorous standards set by the Liberian Registry, one of the world's largest and most respected maritime flags, this course covers a comprehensive range of topics essential for those seeking roles as Barge Supervisors or Barge Masters. From safety protocols to operational procedures, participants will delve into every aspect of managing and overseeing barge activities with precision and expertise. One of the standout features of Elite Offshore's program is its practical approach. Understanding the complexities of offshore environments, the course emphasizes hands-on learning and real-world experience sharing. This ensures that participants not only grasp theoretical concepts but also develop the practical skills necessary to thrive in demanding offshore settings. Moreover, Elite Offshore prides itself on its team of experienced instructors who bring a wealth of industry knowledge to the classroom. With their guidance, students gain insights from seasoned professionals, learning from their firsthand experiences and benefiting from their invaluable advice. The significance of obtaining Liberia's approval for this course cannot be overstated. Liberia's reputation as a leading maritime authority underscores the course's credibility and relevance on a global scale. Graduates can be confident that their certification carries weight and is recognized by industry stakeholders worldwide, opening doors to a multitude of career opportunities. In addition to meeting international standards, Elite Offshore is committed to providing flexible training solutions, which it does with other Liberia approved courses e.g. Offshore Installation Manager (OIM), Ballast Control Operator (BCO) and Maintenance Supervisor (MS). Whether through in-person sessions or online modules, the organization ensures accessibility for students from diverse backgrounds and geographic locations. This commitment to inclusivity reflects Elite Offshore's dedication to empowering individuals to pursue their maritime ambitions without constraints. As the offshore industry continues to evolve, the demand for skilled professionals capable of navigating its challenges remains constant. With the Liberia Approved Barge Supervisor/Barge Master Course, Elite Offshore not only meets this demand but also sets a new standard for excellence in maritime training. By equipping individuals with the expertise and credentials needed to succeed, Elite Offshore is shaping the future of offshore operations, one student at a time. Elite Offshore's introduction of the Liberia Approved Barge Supervisor/Barge Master Course marks a significant milestone in maritime education. With its comprehensive curriculum, practical approach, and global recognition, the course stands as a testament to Elite Offshore's commitment to excellence and innovation in the field of offshore training. For those aspiring to excel in the dynamic world of offshore operations, this course is undoubtedly a pathway to success. For any further information, please contact [email protected] or call [phone] or [phone]. You may visit our website https://eliteoffshore.in (for all courses) or https://ecademy.eliteoffshore.in (for e-learning courses). Visit our training centre at below address: Elite Offshore Pvt. Ltd. G- 5, Platform Level, Tower-3, Belapur Railway Station Complex, Sector-11, C.B.D. Belapur, Navi Mumbai-400614. Contact No. [phone], [phone], [phone] Email: [email protected] or [email protected]

[elite-offshore]

Free Cyber Security Awareness Course by Elite Offshore, https://eliteoffshore.in

[elite-offshore]

Offshore Installation Manager (OIM) Course by Elite Offshore

Offshore Installation Manager (OIM) Course by Elite Offshore The Offshore Installation Manager (OIM) Course conducted by Elite Offshore Pv

[elite-offshore]

Face Fit Test - An Introduction

Face Fit Test by Elite Offshore : Ensuring Safety with Self Contained Breathing Apparatus (SCBA) In high-risk environments, the safety of p