Envirosensors Pty Ltd

Envirosensors is an Australian official agents and distributors of different kind of spectrophotometers.

[envirosensors]

Conductivity Salinity TDS is widely use in industrial applications that involve the detection of contaminants in water. Salinity measurements when dealing with highly concentrated media such as seawater are also regularly monitored and provide important data for climate change science. Desalination plants are featuring more prominently throughout developing counties to supplement municipal water supplies. Their operating efficiency is a key factor to their viability and rely on accurate salinity measurements to monitor membrane performance.  Envirosensors Pty Ltd has a full range of conductivity probes, meters and transmitters from WTW, Sensorex, Jenco Instruments & EDT Ion Direct.

[envirosensors]

Dissolved oxygen (DO) is a vital parameter in the aquaculture industry. The ongoing health of a population of fingerlings in a tank is determined by optimum oxygen saturation levels. Envirosensors can supply a range of galvanic cell dissolved oxygen sensors designed specifically for this application. Another application for residual dissolved oxygen is in modern biological nutrient reduction (BNR) reactors in waste water treatment plants. Here both traditional galvanic sensors or the new generation fluorescence (optical) sensors are used. Dissolved oxygen sensors are available from leading manufacturers like Sensorex Inc, WTW GmbH and Jenco Instruments Ltd. Centrally located in Sydney, Envirosensors is able to service customers Australia-wide.

[envirosensors]

Envirosensors Pty Ltd is agent and distributor for several market leading products used for measurement and monitoring of turbidity.One of the most important measurement parameters of potable water is turbidity which, in simple terms, is a measure of the level of very fine particles in free suspension in water.Dangerous bacteria and pathogens live and multiply on microfine particle surfaces and are not normally able to survive when freely suspended in water.It is essential therefore that reliable and accurate turbidity measuring instruments are used for its determination.There are several factors which can affect turbidity measurements and recommendations for suitable instrumentation are made from many years of experience in water treatment processes and technologies.

[envirosensors]

Envirosensors Pty Ltd is the Australian distributor for Hach-Lange’s range of colour and gloss measuring instruments and has recently been appointed sub distributor for the industrial range of instruments from X-Rite Inc. Numerous manufacturers of finished goods rely on precise colour and gloss measurements to validate the quality and consistency of their products. In many instances, these portable hand-held instruments are an essential quality control tool during the manufacturing process and offer many convenient features for simple shop-floor application.

We are pleased to have partnered with X-Rite who enjoy a long history as manufacturer of high quality and innovative colorimeters and spectrophotometers. All instruments supplied Australia wide are supported and serviced in Sydney where possible, or returned to the manufacturer.

[envirosensors]

As well as a broad range of pH and Redox electrodes, Envirosensors stocks a variety of accessories such as calibration buffers, pH ORP simulators and a complete set of necessary

installation fittings, glands and hardware to enable easy of use and  convenience

Products-

A3007 Jenco 007 Third Arm probe holder•articulated movement •holds several probes. •weighted base for stability •cable clips along arm A3C110 Sensorex C110 pH & ORP simulator•dual modes for high & low impedance signals •signals for both pH and ORP in millivolts •suitable for meters, controllers & display units A3B04 MicroEssentials pH 4.01 technical buffer•powder capsules 10 caps/vial. •also available from Sensorex sachets for 100ml solutions and also ready to use 500ml bottles as convenient accessories •pH 7.00 , pH10.00 and pH 6.86, pH9.0 also available, please enquire A3FC50P Sensorex FC50P•1/2”NPTM nylon Fast & Tight gland. •for in line all 12mm dia. probes •available with 3/4 “NPTM (FC75P) A3ADCFG5 Acqua ADCG5•free chlorine or chlorine dioxide probe holder •modular design •combined flow regulator with built-in flow switch A3TDSK18 Sensorex TDSK18•conductivity standard KCL 18uS/cm @ 25DegC •available in other concentrations •(2 pints) 950ml A3EA899TC Sensorex EA899TC probe adapter•for 8000CD probes •in-line or submersion installations. •Available in Pt100 & Pt1000 ATC •used with S853 or S855 cable cap assembly A3FC800C Sensorex FC800C Flow cell•8000 series 11/2” uPVC T-piece with keyway for insertion of EA899 and EA899TC adapters. • Used for in-line or by-pass installations of S8000CD probes. A3EA890 Sensorex EA890 adapter•8000 series adapter •for use of S800CD probes in submersion assemblies with existing S653 cable/cap extension leads. A3PHAMP-1 Sensorex pHAMP-1 Unity gain preamplifier•In-Line pre amplifier BNCM/BNCF. •Self powered unity gain ± 2000 mV A3BG07 Micro Essentials pH 7.01 buffer powder • pH 7.01 technical buffer •in gal packs (3.85l). 3 vials/pack convenient •for heavy users. •available in other technical buffer values, 7.01, 10.00, 6.86 A3FC72 Sensorex FC72 •FCL/CLD all series probe holder. •precision machined perspex construction •flow cell and clamp

[envirosensors]

Envirosensors has a broad range of instrument transmitters and controllers for measuring single and dual parameters such as pH and temperatute or ORP and temperature. below is a range of selected controllers and monitors suitable for trade waste effluent control food and beverage industry and other processing plants requiring treated waste effluent control and monitoring.

Products-

I33A30WTW pH 1970i pH/mV/T•professional heavy duty grade field pH meter •IP67 and GLP compliant, probe depths to 100m •suits 2” bore hole deployment , 600hrs operation •800 data point logging, PC software interface RS232, rechargeable NiMH batteries I3PHMASensorex pHMA pH transmitter•Loop powered isolated pH transmitter •adjustable zero and span •fully encapsulated •compact I33677Jenco 3677 pH/mV controller•dual function pH and ORP •vertical 1/8 DIN enclosure and LCD display •isolated 4-20mA output •dual on/off relays •auto temperature compensation I3695pHJenco pH 695 loop transmitter•Nema 4 enclosure IP68 •pH/mA LCD display •isolated 4-20mA outputs for pH •12-80VDC loop power input I3TX100Sensorex TX100 pH/ORP transmitter•2- wire loop pH transmitter, 0/4-20 mA output •12-36VDC input power •multiple installation option •2 line LCD display I3TX3000Sensorex TX3000 pH/ORP and Temp Transmitter•pH/ORP transmitter, 2 isolated 0/4-20 mA outputs for pH/ORP and temperature •NEMA 4 IP65 enclosure •100-240 VAC input power •Large segmented LCD display I36308PTJenco 6308PT•pH/mV/T meter •0/4-20mA output •4 programmable relays with hysteresis • IP67 rating •Large backlit LCD display •Available as conductivity and DO variants I122472000WTW System 182 and 2020 XT controller•2, 4 and up to 20 digital sensor inputs •configurable analogue outputs including relay outputs with logging, •Modbus/Profibus options •multiple on-line sensor configuration. •modular ,expandable and flexible

[envirosensors]

Below is a selection of  lab pH & ORP meters from various manufacturers such as WTW GmbH, Sensorex, Jenco, EDT Ion Direct, Eutech and others. Our broad range ensures that we have meters to suit every application and budget from laboratory bench-tops to rugged field hand-helds and general purpose quick pH checkers.

[envirosensors]

Sensorex has a broad range of industrial and heavy duty pH & redox sensors for all types of installation options including in-line, submersion, and by-pass.Electrodes are designed for high tempertaure, high pressure and heavily contaminated media. We offer low cost designs to precisely engineered systems to suit the most demanding applications

[envirosensors]

Below is a selection of commonly stocked Lab  pH and ORP sensors suitable for a large range of applications including commercial swimming pools, therapeutic spas and baths, aquaculture, food & beverages, electroplating, mining & municipal water & waste-water treatment. Please contact us for any specific application assistance as we have a very large range from which to select the right pH or redox probe for you.

[envirosensors]

 The measurement of pH is perhaps the most widely used parameter for determining the quality of a liquid. It’s value determines whether the liquid, solution or substance is either acidic or basic in nature and allows us to predict how it should be handled, stored, or treated in a given process.

Envirosensors Pty Ltd distributes a wide range of market leading sensors for the measurement of pH, ORP (Oxidation Reduction Potential) Redox, ISE’s (Ion Specific Electrodes), and sanitisation (FCL and CLD) probes such as Free Chlorine and Chlorine Dioxide. Our products are sourced from various quality manufacturers such as Sensorex, WTW GmbH, Jenco Instruments,Eutech Instruments and EDT-Direct Ion.

Sensorex-TX3000