Filtervac was first established in 1983 and was reorganized in 1993 with a much stronger focus on the global market. The founder and president of Filtervac International was the former Chief Engineer of Keene-Bowser Corp., tracing its roots back to 1885. During this period, KeeneBowser was known as the world leader in oil dehydration equipment used for insulating oil applications in the electrical and power industry. This laid the foundation on which Filtervac improved and expanded on its line of quality filtration products. Since 1983, Filtervac International Inc. is a leading designer and pioneer North American Manufacturer of liquid and air filtration, with special emphasis on providing quality oil purification systems for a wide variety of oils and applications. Transformer Oil Regeneration Systems, High Vacuum Transformer Oil Purifiers, Degasifies, Oil Recovery Systems, Low Vacuum Dehydrators, Turbine Oil Conditioners, Lube Oil Recovery Systems, Lubrication Systems, Water DeOxygenation Systems, Thermal waste gas flares, and EPC Turnkey solutions covering the entire spectrum. “Filtervac” name quickly became synonymous in the worldwide market for quality engineered liquid filtration equipment that is on the cutting edge of technology, especially in the area of oil filtration, purification and regeneration systems. Filtervac offers a variety of systems for various industries and applications. Filtervac has the largest fleet of service and rental equipment’s across the globe that any other original equipment manufacturers in the industry. Filtervac’s senior executive management team has a combined expertise of over 150 years in the industry.
Filtervac Centrifugal water-oil separator, centrifugal oil-water separator or centrifugal liquid-liquid separator is a device used to separate oil and water by centrifugation. Centrifugal oil separator utilizes disc stack centrifuges to accomplish a fast and effective simultaneous three-phase separation of oil, water and sludge, regardless of the level of and the nature of the contaminants. In addition to the centrifuge the standard design includes an inlet gear pump, electric heater, polishing filter, control panel (Nema 12) and various safety interlocks to provide for a virtually automatic operation of the system.
Filtervac centrifuge oil separators undergo a three-step process, oil-water separator, liquid-liquid separator, and centrifugal water-oil separator using disk stack.
Filtervac centrifuge oil separators undergo a three-step process, oil-water separator, liquid-liquid separator, and centrifugal water-oil separator using disk stack.
Filtervac Centrifugal water-oil separator, centrifugal oil-water separator or centrifugal liquid-liquid separator is a device used to separate oil and water by centrifugation. Centrifugal oil separator utilizes disc stack centrifuges to accomplish a fast and effective simultaneous three-phase separation of oil, water and sludge, regardless of the level of and the nature of the contaminants. In addition to the centrifuge the standard design includes an inlet gear pump, electric heater, polishing filter, control panel (Nema 12) and various safety interlocks to provide for a virtually automatic operation of the system.
Filtervac centrifuge oil separators undergo a three-step process, oil-water separator, liquid-liquid separator, and centrifugal water-oil separator using disk stack.
Filtervac Centrifugal water-oil separator, centrifugal oil-water separator or centrifugal liquid-liquid separator is a device used to separate oil and water by centrifugation. Centrifugal oil separator utilizes disc stack centrifuges to accomplish a fast and effective simultaneous three-phase separation of oil, water and sludge, regardless of the level of and the nature of the contaminants. In addition to the centrifuge the standard design includes an inlet gear pump, electric heater, polishing filter, control panel (Nema 12) and various safety interlocks to provide for a virtually automatic operation of the system.
Filtervac manufacturers a complete line of oil filtration system or vacuum purification system or equipment that removes this water contamination as well as other solid contaminants from the oil. The VPH systems designed for processing transformer oil in a workshop in the field of storage drums. These units are available to fulfill the requirement for individual jobs or to the trail before buying. Two types of oil purification system VPH 1600 and VPH 2400 for rental with many options installed for suitability to a wide variety of applications.
The VPN 1600 and VPN 2400 systems design with high vacuum purification system with rental options for processing transformer oil in workshops, in the field or storage
Filtervac manufacturers a complete line of oil filtration system or vacuum purification system or equipment that removes this water contamination as well as other solid contaminants from the oil. The VPH systems designed for processing transformer oil in a workshop in the field of storage drums. These units are available to fulfill the requirement for individual jobs or to the trail before buying. Two types of oil purification system VPH 1600 and VPH 2400 for rental with many options installed for suitability to a wide variety of applications.
The Filtervac Filter Carts are used to clean insulating oils found in switch gear and circuit breakers. These mobile and roadworthy filtration systems come with processing rates from 10-40 GPM and come equipped with one or more particulate removing filter cartridges. A variety of filters are available with micron ratings down to 0.5 micron as well as water adsorptive cartridges. Typical system features include on board dirty and clean oil tanks, hose reels and power cables. Each system is designed to ensure operator friendliness and maintenance ease.
Portable Oil Filtration System | Filter Carts | Filtervac Canada
The Filtervac Filter Carts are used to clean insulating oils found in switch gear and circuit breakers. These mobile and roadworthy filtration systems come with processing rates from 10-40 GPM and come equipped with one or more particulate removing filter cartridges. A variety of filters are available with micron ratings down to 0.5 micron as well as water adsorptive cartridges. Typical system features include on board dirty and clean oil tanks, hose reels and power cables. Each system is designed to ensure operator friendliness and maintenance ease.
Filtervac oil filter carts remove contamination found in switchgear and circuit breakers. Portable oil filter carts for transformer oil removal are available.
The FilterVac Filter Carts are used to clean insulating oils found in switch gear and circuit breakers. These mobile and roadworthy filtration systems come with processing rates from 10-40 GPM and come equipped with one (1) or more particulate removing filter cartridges. A variety of filters are available with micron ratings down to 0.5 micron as well as water adsorptive cartridges. Typical
system features include on board dirty and clean oil tanks, hose reels and power cables. Each system is designed to ensure operator friendliness and maintenance ease.Â
Filtervac Portable mobile transformer oil purifier machine (Model Ecoil RS-M). The lightweight and easily portable uses latest vacuum technology to gasify, filter and dehydrate etc., It is specially designed for the on-site regeneration of insulating mineral oil in energized or de-energized transformers. One of the many unique features of the Transformer oil regeneration system is the ability to reactivate of the same clay up to 300 times before the clay is exhausted. Once exhausted the clay can be disposed of as a non-hazardous material.
Filtervac provides a solution to the oil refining process using different kinds of machinery and methods using oil refining green technologies.
Filtervac Portable mobile transformer oil purifier machine (Model Ecoil RS-M). The lightweight and easily portable uses latest vacuum technology to gasify, filter and dehydrate etc., It is specially designed for the on-site regeneration of insulating mineral oil in energized or de-energized transformers. One of the many unique features of the Transformer oil regeneration system is the ability to reactivate of the same clay up to 300 times before the clay is exhausted. Once exhausted the clay can be disposed of as a non-hazardous material.
Filtervac Turbine Oil Purifier (Model VPL) utilizes a vacuum dehydration process to remove emulsified and dissolved water from turbine oil as well as fine particulate and gasses. The Turbine Oil Purifier system are self-contained, skid mounted and offer a P.L.C. controlled full status control panel for fully automatic operation.
The Turbine Oil Purifier purpose is the removal of water from the oil. This is achieved by drawing oil into the system via the use of the system’s vacuum or an option inlet pump (Option O). The oil is than directed through an electric heater whereby it is heated to a suitable temperature of 140-160 Deg. F.
Filtervac Turbine Oil Purifier provides as a standard a Polishing Filter Vessel that is located on the discharge side of the vacuum chamber. If an optional inlet pump is chosen, the customer is able to relocate the standard polishing filter vessel to the inlet side of the vacuum chamber or can simply select an optional Pre-Filter Vessel to provide for pre-filtration of the oil prior to entering the vacuum chamber. The vessel contains a 3 Micron Absolute pleated filter with a micro-glass media that is rated to remove 99.5% of particles greater or equal to 3 microns.
Vacuum Turbine Oil Purification System (MODEL VPL) – Filtervac Canada
Filtervac Turbine Oil Purifier (Model VPL) utilizes a vacuum dehydration process to remove emulsified and dissolved water from turbine oil as well as fine particulate and gasses. The Turbine Oil Purifier system are self-contained, skid mounted and offer a P.L.C. controlled full status control panel for fully automatic operation.
The Turbine Oil Purifier purpose is the removal of water from the oil. This is achieved by drawing oil into the system via the use of the system’s vacuum or an option inlet pump (Option O). The oil is than directed through an electric heater whereby it is heated to a suitable temperature of 140-160 Deg. F.
Filtervac Turbine Oil Purifier provides as a standard a Polishing Filter Vessel that is located on the discharge side of the vacuum chamber. If an optional inlet pump is chosen, the customer is able to relocate the standard polishing filter vessel to the inlet side of the vacuum chamber or can simply select an optional Pre-Filter Vessel to provide for pre-filtration of the oil prior to entering the vacuum chamber. The vessel contains a 3 Micron Absolute pleated filter with a micro-glass media that is rated to remove 99.5% of particles greater or equal to 3 microns
Filtervac pioneered oil-refining green technologies and proudly serving the world since 1983, tracking roots back to 1885. Contact: [email protected]
Filtervac Turbine Oil Purifier (Model VPL) utilizes a vacuum dehydration process to remove emulsified and dissolved water from turbine oil as well as fine particulate and gasses. The Turbine Oil Purifier system are self-contained, skid mounted and offer a P.L.C. controlled full status control panel for fully automatic operation.
The Turbine Oil Purifier purpose is the removal of water from the oil. This is achieved by drawing oil into the system via the use of the system’s vacuum or an option inlet pump (Option O). The oil is than directed through an electric heater whereby it is heated to a suitable temperature of 140-160 Deg. F.
Filtervac Turbine Oil Purifier provides as a standard a Polishing Filter Vessel that is located on the discharge side of the vacuum chamber. If an optional inlet pump is chosen, the customer is able to relocate the standard polishing filter vessel to the inlet side of the vacuum chamber or can simply select an optional Pre-Filter Vessel to provide for pre-filtration of the oil prior to entering the vacuum chamber. The vessel contains a 3 Micron Absolute pleated filter with a micro-glass media that is rated to remove 99.5% of particles greater or equal to 3 microns.
Filtervac oil regeneration process eliminates acidic colloidal and other products of deterioration from oil for restoring its original properties equal to fresh oil.
Filtervac Transformer Oil Regeneration is also known as oil reclamation or Oil Recycling System. This machine module is used to treat the insulating oils used in high voltage transformers and switch-gears. Â Oil regeneration machine regenerates aged transformer oils by eliminates acidic, colloidal contaminants and other products of deterioration. Filtervac regeneration process is achieved by chemical and absorbent means to obtain an oil with characteristics similar to those of a new product. Advantages of oil regeneration are restoring neutralization number, interfacial tension and dissipation factor, Remove moisture and dissolved gas through vacuum processing. Removing solids by filtration.
Transformer oil Regeneration Machine Plant Process – Filtervac Canada
 Filtervac Transformer Oil Regeneration is also known as oil reclamation or Oil Recycling System. This machine module is used to treat the insulating oils used in high voltage transformers and switch-gears.  Oil regeneration machine regenerates aged transformer oils by eliminates acidic, colloidal contaminants and other products of deterioration. Filtervac regeneration process is achieved by chemical and absorbent means to obtain an oil with characteristics similar to those of a new product. Advantages of oil regeneration are restoring neutralization number, interfacial tension and dissipation factor, Remove moisture and dissolved gas through vacuum processing. Removing solids by filtration.
