HashirPervezDIDI

[hashirp]

ultrasonic distance with blinking led and sound reactive led

[hashirp]

Module D arduino connections and codes for the sensors and actuators

[hashirp]

Profile Curve A B and D with the bot in deployed and closed view

[hashirp]

[hashirp]

This module was about testing different bio plastics,

my team did a bit of exploration with different recipes and add ons

[hashirp]

Experiment 1:

The process of making this bioplastic is attached in the pictures itself. This is a recipe taken from the internet.

Below is the number of hours each picture was taken.

Pic1: 1 hour

Pic2: 3 hours 20 mins

Pic3: 8 hours

Pic4:10 hours 35 mins

Pic5: 26 hours

The bioplastic at the start was a sticky thick mixture which as time passed by became thin and little hard yet still having a sticky layer on top.

[hashirp]

RE EDIT. laser cut volume i used 3 and 6 as my u and v divisions and generated a volume to my surface by adding more components as the code on the website want sufficient for my values. the extra components are clearly visible in picture 4

[hashirp]

Stepped in to the shoes of people without machines to prepare fabrics or wearables. Started weaving this by 2 strings up and down ended up with 6 to 8 at the end. Hats off to those who used to do this or still do.

i used 4 different threads blue being the initial color with looping 2 threads at a time from there I shifted to green medium thread that looped 3 blues strings at a time continued by a thick red that circled 6 to 8 from start to end. it ended with  a thin green one continuing the 8 strings at a time ratio. i really hope to mold them in my surfaces

[hashirp]

A piece of wood put into the torture chamber (cnc machine) and craved out by the desire of an insects instructions (grasshopper) and handed over to a person who did not see this coming(me)

to obtain this shape use 3 and 6 as your u and v division values respectively and  add diamond and elipse textures from lunch box and spread them across the surface. use the simple mesh switch to generate the mesh and bake it to obtain a 3dm file. use a 20 by 20 cm wood piece to carve out the texture on wood

[hashirp]

Laser cutting the plain surface using transparent acrylic then gluing them together using chloroform.

[hashirp]

Goofing around the project with hayk

[hashirp]

The final result of the laser cut.

[hashirp]

Slomo

[hashirp]

Additional

[hashirp]

Cnc process video

[hashirp]

[hashirp]

The laser print cut and stuck together to give a surface for further moulds.

i used 36 pieces each 200 mm long in length with a 2.0 thickness. i used acrylic as my material where i used a 100 percent intensity of the laser and ran it 3 times used alcohol to clean the acrylic and then used chloroform to glue them together according to their numbers

i experimented different lighting techniques as i had a transparent surface for the more darker one i used an aperture of f8 and manual focus to adjust the light