New Post has been published on https://stonegroup.ir/en/commeh-sabz-armani/
Coomeh Solid Surface sheets are recommended for interior decorative applications as described below where prestigious appearance, high stain resistance, ease of maintenance and extensive customizing capabilities are beneficial.
Applications may include paneling for counter tops , elevators, tub and shower surrounds, sinks and interior signage.
Solid Surfacing is water-resistant and features inconspicuous seams and is renewable and repairable.
Because of their chemical makeup, Coomeh Solid Surface sheets are appropriate for many hospital applications.
Coomeh Solid Surface sheets are only available to fabricators who have received proper training by Coomeh or its distributors as “Certified Coomeh Fabricators.” Interested fabricators should contact their local Coomeh Solid Surface distributor for training requirements.
Architects, designers, builders and remodelers may locate certified fabricators through distributors of Coomeh Solid Surface products.
Coomeh Solid Surface sheets are manufactured of acrylic resins, with fire-retardant fillers and proprietary coloring agents. The sheets are homogeneous.
Coomeh Solid Surface sheets are meant for interior use since they must be applied to a suitable substrate. For a list of approved substrates, adhesives and detailed installation instructions, please contact your local Coomeh representative or Certified Coomeh Solid Surface Fabricator.
Coomeh Solid Surface panels are supplied with a linear sanded surface. The final finish should be supplied by the fabricator and may range from matte to high gloss, depending on the customer’s specification.
Coomeh” Solid Surface Standard Colors Inventoried Size Minimum Order Frosty White 1573SL 60″ x 98″ (152.4cm x 248.92cm) None Antique White 1572SL 60″ x 98″ (152.4cm x 248.92cm) None Beige Tempest 1530TM 60″ x 98″ (152.4cm x 248.92cm) None
Product Type 025 = 0.240″(0.6096 cm) ±
Coomeh” Solid Surface is inventoried in three colors. Additional select Coomeh colors in 1/4″ thickness are available as a special order item; please see the Color Availability chart below.
D30-SL Natural Almond 9030-ML Baja Melange D50-TM Khaki Brown Tempest 9031-ML Mojave Melange D309-MG Fawn Mirage 9032-ML Arabian Melange D315-TM Platinum Tempest 9033-ML Caramel Melange D354-SL Designer White 9040-MG Burnt Amber Mirage D431-MG Alabaster Mirage 9041-ML Quarry Melange D426-MG Raven Mirage 9060-ML Copper Melange 1530-TM Beige Tempest 9070-ML Arctic Melange 1531-MG Light Beige Mirage 9072-ML Aspen Melange 1572-SL Antique White 9073-ML Calypso Melange 1573-MG Frosty White Mirage 9081-MG Seacrest Mirage 1573-SL Frosty White 9082-ML Cascades Melange 9021-MG Graphite Mirage 9090-ML Eureka Melange 9022-MG Atlantis Mirage 9091-ML Midnight Melange 9023-ML Acadia Melange 9171MG Snowy Mirage 9024-ML French Blue Melange
The sheet size for special orders can be customized to allow for cost efficiencies and design flexibility. Maximum sheet size available is 60″ x 144″ (152.4cm x 365.76cm). Sheets may be approximately 1/4″ (6.35mm) longer and wider than sheet sizes listed above and special order sheet sizes. Minimum order quantities apply and allow six to eight weeks for delivery. Please contact your local Coomeh representative for complete order requirements.
Fire Test Data⎯Coomeh″ Solid Surface
Coomeh″ Solid Surface is fire-rated to code compliance Class II per ASTM-E-84.
Typical Physical Properties of Coomeh″ Solid Surface
Tests Coomeh″ Solid Surface Stain Resistance ANSI Z-124.3 modified Pass Boiling Water Resistance NEMA LD3-3.05 No effect A High Temperature Resistance NEMA LD3-3.06 No effect A Radiant Heat Resistance NEMA LD3-3.10 No effect A Impact Resistance NEMA LD3-3.08 (1/2 lb. Ball) 125 in. drop B Light Resistance NEMA LD3-3.03 No effect Moisture Absorption ISO 4586-2 Method 7 ≤ 0.4 % Thermal Expansion Coefficient ASTM D 696 1.8 x10-5 in./in./°F Hardness ASTM D 2583 (Barcol) 57 Deflection Temperature Under Load 90°C Density ASTM D 792 1.60 gram/cm3 Approximate Weight 2.1 lb./ ft2 Weatherability ASTM D 2565 Pass C ASTM D 1499 Pass C Fungal Resistance ASTM G 21 Pass Bacterial Resistance ASTM G 22 Pass
A Boiling water and high temperature resistance tests may have an effect on the surface; however, the surface can be renewed to “No Effect.”
B Tested without bonding to substrate.
C Method of grading is ASTM D2244-89. Acceptability for passing is Delta E ≤ 2 units.
The information contained in this section is based on technical data which Coomeh
believes to be reliable and is intended for use by persons having knowledge of this technical area at their own discretion. “Typical properties” refers to an average value.
Codes and Certifications – Coomeh″ Solid Surface
GREENGUARD® Indoor Air Quality
GREENGUARD® Children and SchoolsSM
FDA compliance for food contact
Approved by NSF International in Class 51 for “Splash Zone” and “Food Zone” areas
ASTM G-22 bacterial resistance
ASTM G-21 fungal resistance
For samples, literature, questions or technical assistance, please contact our toll-free Hotline at 800.433.3222, Monday through Friday, 7 am –7 pm, CST.
What is Polygranite?
Polygarnite is a Polymer composite made from UP resin and ATH, which looks like granite stone. This is why Coomeh co. has come with the trade mark Polygarnite for its Solid Surface products.
Polygarnite is available in 60 Stunning colors, and is offered in the standard size of 3600 × 770 ×12 mm.
Polygaranite can be used as the Surface component in a large range of applications. Kitchen countertops, bathroom facilities, restaurant tables, lab units,… are the main applications which can use Polygranite as their Surfacing component.
Why Polygranite?
Before the invention of Solid Surface products, most of the worktop Surfaces were made from wood, stone, steel and ceramics. These material have many advantages and disqualifications at the same time. The purpose of Polygarnite Solid Surface which has allthe advantages of the mentioned, but lacks the disqualifications:
• Looks like Granite Stone.
• Feels shapes like wood.
• Clean & nonpoures like ceramics.
Several pieces of Polygarnite slabs can be joint together while the seams would be totally invisible.
Choose Polygarnite if you are looking for total desine freedom.
