King Honor International

King Honor International Ltd. is a professional supplier and manufacturer of waxes, which was established in 2008,located in Dalian, China.Dalian seaport ranks the third in China. Every year, about 70% of paraffin wax in China are exported through Dalian seaport. King Honor rely on the advantage of the location, rapidly grow up to a global well known supplier of waxes. She strongly focuses on research, development and innovation. She promised to offer the customers with high quality goods, quick response and best services, which are supported by a professional team. The technical department has the seven-step quality-control process. Sales department has the commitment to response within 24 hours. The logistic department has the fully control of the shipment and delivery. There’s a complete management for the after-sales service. https://www.khonorwax.com/

[khonorwax]

Petroleum wax is a general term for various wax products prepared from waxy distillates after refining, including liquid paraffin, paraffin and microcrystalline wax. Paraffin wax is produced by the st...

Petroleum wax is a general term for various wax products prepared from waxy distillates after refining, including liquid paraffin, paraffin and microcrystalline wax. Paraffin wax is produced by the steps of dewaxing, deoiling, refining and molding the lubricating oil fraction in crude oil, and generally contains C2. ~C3. components of normal paraffins, small amounts of isoparaffins and naphthenes usually having a melting point of 50 °C to 74 °C.

 The wicking and deoiling method is carried out by utilizing different properties of the melting point of the wax and the oil. The wicking and degreasing method does not use a solvent in the production process, and it is only necessary to heat the raw material to a temperature above the melting point in the production process.

 For the common sweating and deoiling method, the wax and oil components are in a solid and liquid state, respectively, during the warming and sweating process, but it is also difficult to completely separate. In order to meet the requirements of the final product oil content, it is common to use a method of prolonging the sweating time and increasing the sweating termination temperature. Prolonging the sweating time will result in a long production cycle; increasing the sweating termination temperature will cause some wax to be removed with the oil, resulting in a decrease in product yield.

 The common sweating and deoiling process can produce soap wax and low melting point paraffin wax having a melting point of 40 °C to 60 °C, and is not suitable for producing a high melting point paraffin wax product having a melting point of about 70 °C. Tests have shown that when the common sweating and deoiling process produces high melting point paraffin wax products with a melting point of about 70 °C, even if the method of prolonging the sweating time and increasing the sweating end temperature is adopted, the oil content of the wax in the late stage of sweating has nothing to do with the yield, that is, wax. The oil content on the oil does not decrease with the decrease of the yield. Therefore, the common sweating and deoiling process is not suitable for the high melting point paraffin wax products that meet the semi-refined or fully refined product standards with a melting point of about 70 °C. In particular, the oil content index cannot meet the technical and indicator requirements. At present, only some manufacturers use the sweating and deoiling process to produce soap wax and low melting wax paraffin.

 Over the years, the sweating and deoiling process has been developed in production equipment and technology, such as vertical square multi-section separator sweat tank, paraffin sweat tank, tubular paraffin deoiling device, etc., improved on sweating and deoiling production equipment. An efficient paraffin sweat tank is improved in the sweating and deoiling process. However, these improvements still do not produce high melting point paraffin wax products that meet the standards for semi-refined or fully refined products.

 Compared with the solvent deoiling process, the sweating and deoiling process has the advantages of low investment, simple production process and low operating cost; more importantly, the sweating and deoiling process is the only solventless deoiling method currently known for industrial scale production of paraffin products. In today's promotion of green, low-carbon, environmentally-friendly and energy-saving, the demand for the production of high melting point paraffin wax products by the sweating and deoiling process is even more urgent.

[khonorwax]

King Honor is a well-performed paraffin wax producer in the wax field. In the corrugated board industry, paraffin wax is a water and moisture barrier, and can improve the water resistance of the paper, reduce the fluffing of the paper surface and improve the smoothness of the paper surface. RFQ!

Paper, Package and Carton Wax

 In the corrugated board industry, paraffin wax is a water and moisture barrier. Fully refined paraffin wax can pass FDA process and safe to contact with the vegetables and fruits. By the modification, paraffin wax is endowed with the special physical properties, it is better adherent to the cardboard fiber, improving the brittleness of paraffin wax, producing a stable and even coating layer. That makes the carton box with good water resistance and flexibility which has superior performance on packing frozen food and seafood

 In paper industry, paraffin wax is emulsified to wax emulsion as a sizing agent. It can be used in internal sizing and surface sizing. It lifts up the paper quality and prevent the starch in the pulp form sticking to the surface o the paperboard. It can improve the water resistance of the paper, reduce the fluffing of the paper surface, and also improve the smoothness of the paper surface and the light stability of the paper.

[khonorwax]

Production process:It is synthesized from carbon monoxide and hydrogen under certain pressure, temperature and catalyst conditions, fractionated, solvent extraction and bleaching, so as to obtain high...

Production process:

It is synthesized from carbon monoxide and hydrogen under certain pressure, temperature and catalyst conditions, fractionated, solvent extraction and bleaching, so as to obtain high melting point wax from monomer hydrocarbons similar to liquid paraffin wax to polyethylene wax. It has special properties that other natural waxes or synthetic waxes do not have. The Fischer-tropsch process was originally used as a substitute for synthetic petroleum products. At present, this process has been widely used in the conversion of natural gas into synthetic fuel. This new generation of polymer with advanced technology combines the properties of high melting point, low viscosity, and excellent hardness, and shows excellent performance in various applications.

 Product Usage:

High melting point paraffin wax with its unique advantages for hot melt adhesive, plastic lubrication, demoulding, pipe, profile, ink, paint, polishing wax, masterbatch, rubber, candle, textile. The role of high melting point paraffin wax in PVC pipes, hot melt adhesives, inks, and color masterbatches is indispensable.

 PVC high melting point paraffin wax:

High melting point paraffin wax can be used as an external lubricant for PVC. The low viscosity can increase the production speed of these products. These melting points can help the dispersing of these printed materials and the excellent smoothness of these printed materials. The product at high-temperature viscosity is low, can improve the production speed and fluidity of the product, enhance the degree of penetration of the bonding surface, especially in the high viscosity system of extrusion has a better appointment than the ordinary PE wax add 40~50% less, and can significantly improve the product surface gloss. When strong colors are used, the melted ft wax can effectively moisten the dye and reduce the extrusion viscosity.

 Waxes for high melting point paraffin wax:

In the application of hot melt adhesive, the features of high melting point paraffin wax are:

1. Without any pollution or taste, it can be directly used in the melting point of food.

2. with a higher condensation point, can improve the heat resistance of hot melt adhesive.

3. the needle penetration is small, can improve the strength of hot melt adhesive.

4. The carbon is distributed within a narrow range, the opening time is small, and the curing time is fast. The wax for printing ink paint is high melting point paraffin wax.

[khonorwax]

Waxes are not dangerous chemicals. But while handling powder form, or when they are melted, please comply with the instructions included - but are not limited to the following items.

Waxes are not dangerous chemicals. But while handling powder form, or when they are melted, please comply with the instructions included - but are not limited to the following items.

Handling and Storage

Wash thoroughly after handling.

 Remove contaminated clothing and wash before reuse.

 Avoid contact with eyes, skin, and clothing.

 Ensure good ventilation/exhaustion at the workplace.

 Keep the container tightly closed. Avoid ingestion and inhalation.

 Use the proper Personal Protective Equipment(PPE) while using the products.

 Wax Storage

Storage

If during the use of these products, avoid breathing, or skin or eye contact;

 Store these products in a cool, dry location, away from sources of intense heat, incompatible materials, water, and flame.

 If stored in one common storage facility, keep the container closed when not in use. Store in a tightly-closed container.

 For the details, please require us for the MSDS/SDS. King honor will not accept any reliablility or liability for any damage and contamination to products resulting from unproper handling and storing.

 Wax Overseas Transportation

Overseas Transportation

In order to enhance your purchasing efficiency and realize the lean management, as your supplier, we will provide you with the most efficient transportation.

 During Long-distance transportation and hot weather, the powder form waxes may have cracking that does not effect the products quality.

 We choose the strong and large shipping companies as our strategic partners to provide our customers with safe sea transportation.

[khonorwax]

Microcrystalline wax is a kind of refined synthetic wax with similar microcrystalline properties, which has the characteristics of good luster and light color. The melting point of microcrystalline wa...

Microcrystalline wax is a kind of refined synthetic wax with similar microcrystalline properties, which has the characteristics of good luster and light color. The melting point of microcrystalline wax is high melting point. It is as white as jade, and can bring extremely beneficial impact on the production of light - colored products. In addition to normal paraffins and isomeric paraffins, the wax also contains many saturated hydrocarbons with long branched chains and rings. As a result, the melting point, molecular weight and viscosity of microcrystalline wax are higher than that of petroleum wax, and its brittleness is lower and it is not easy to break.

 Microcrystalline wax is mainly composed of c30-50 cycloalkanes and a few n-isomeric alkanes, which have high melting point and amorphous characteristics. The melting point of microcrystalline wax is generally 54.4 C - 90.6 C. Compared with paraffin wax, microcrystalline wax is tough and not easily broken. Most grades of microcrystalline wax are malleable. In color, the microcrystalline wax is milky white or yellowish. It is white to light yellow small needle-shaped crystal, odorless and tasteless. The main components are high carbon (31) n-alkanes, isomeric alkanes and a small amount of cycloalkanes. It is a high boiling point product obtained by treating the residue of petroleum fractionation with solvent extraction and other methods. It has good adhesion and ductility, not fragile at low temperature, adding liquid oil to prevent oil precipitation. Used as a viscosity regulator of hot melt adhesive, microcrystalline wax is better than paraffin in improving heat resistance, cold resistance, flexibility and bonding strength, but less agglomeration resistance. It can also be used as a protective agent for bonding surfaces.

 Microcrystalline wax is mainly divided into three models: no. 70, no. 80 and no. 85. It has good oil absorption performance and can form stable and even paste with a variety of solvents and waxes. Also, microcrystalline wax has emulsifying properties and can be used as processing aids for shoe polish, car wax, polishing wax, floor wax, polishing wax, Chinese pills, protective agents, candles, wax toys, dental materials and cosmetics, etc. In addition, the use of this raw material in the waxed paper formula can make the writing clear and the abrasion resistance significantly improved. Microcrystalline waxes are widely used and are the latest production of synthetic waxes in the 1990s. It can replace the same kind of imported gute wax and reduce the cost by about 50%. It can be used as oil phase raw material of cold cream, lipstick and hair wax in cosmetics. Used as a viscosity regulator of hot melt adhesive, microcrystalline wax is better than paraffin in improving heat resistance, cold resistance, flexibility and bonding strength, but less agglomeration resistance. It can also be used as a protective agent for bonding surfaces.

 KING HONOR INTERNATIONAL LTD specializes in the research and development, manufacturing, marketing and service of ft wax and other products, and provides paraffin products to distinguished customers in many countries and regions all over the world. As one of the famous microcrystalline wax suppliers, KING HONOR INTERNATIONAL LTD was founded in 2008  with ten years of production experience. If you are interested in any of our products, contact us now.

[khonorwax]

King Honor, an excellent and responsible paraffin wax manufacturer in the wax field, can tailor various paraffin wax applications according to clients' needs. KH produces ink and toner wax which can be components and packaging materials for food and other commodities, increasing flexibility. RFQ!

The ink is a homogeneous mixture of colorants(Pigments and Dyes), binders, filling materials, and additives, etc. The color shade, fluidity and drying properties are the three most important properties of the ink.

 The micronized wax is made from polyethylene wax, Fischer-Tropsch wax, polypropylene wax, polytetrafluoroethylene, and modified wax by various micronizing processes. It improves the surface scratch resistance, wear resistance, increase slip, resist back tack, non-adhesive, improve hand feeling; and improves anti-blocking, anti-staining performance, can control the gloss of printing ink, prevent pigment settling, cooperate with Asia Production of high-performance matt inks and paints, etc.

 They can be components and packaging materials for food and other commodities (such as wax paper, crayons, carbon paper), coating materials for baking containers, cosmetic raw materials, for fruit preservation, improving rubber aging resistance and increasing flexibility, electrical appliances Component insulation, precision casting, etc.

[khonorwax]

For ease of transportation, paraffin manufacturers are often supplied in the form of micronized wax powder. Painters must fully utilize the characteristics of micronized wax powder and must have a goo...

For ease of transportation, paraffin manufacturers are often supplied in the form of micronized wax powder. Painters must fully utilize the characteristics of micronized wax powder and must have a good dispersion process to ensure.

 Several common methods of dispersion:

 (1) Melt Dispersion Method: After the micronized wax powder is melted at a high temperature, it is slowly sprayed in a cold solvent (generally a non-polar solvent such as toluene is used), so that the wax liquid is suddenly cooled, and small particles are precipitated.  If the cooling rate is faster, the wax emulsion formed is finer. The wax powder thus dispersed has the best abrasion resistance, the least slip, and the least influence on the gloss. The disadvantage is that special equipment is required and there is a risk of fire. It is mainly used in the production of high-grade paint.

 (2) Cold dispersion method: The method of cold dispersion can be used to prepare a high concentration of a fine powder wax dispersion. The solids content depends on the solvent used.  Commonly used non-polar or weakly polar solvents such as mineral oil, toluene and the like is used  to disperse wax powder to obtain a high concentration of wax slurry. The wax paste has good fluidity and high storage stability and can be directly added to inks and paints. The dispersion method is as follows: first stir at a lower speed until the resin liquid produces a vortex, and then slowly add the wax powder into the vortex. After the wax powder is all added, the stirring speed is increased to 1000 rpm, and the stirring is carried out for 10 to 30 minutes, and the fineness can be qualified.

 (3) Precautions for dispersion of cold-ground micronized wax powder

 A. Temperature control: If the temperature of the low molecular weight polyethylene wax is too high during the dispersion process, it may cause partial dissolution of the wax powder.  The solvent infiltrates the wax powder to cause swelling, resulting in re-flocculation and coarsening, forming coarse particles, and the wax powder is ineffective.  Generally, the dispersion temperature is not higher than 40 °C.

 B.Generally, esters, ketones or ether alcohols are used as the dispersion solvent of the wax powder, and it is preferable to avoid the use of the benzene solvent, because the benzene solvent has strong penetrating power to the wax powder, and it is easy to cause the wax powder to swell at a high temperature.