Laser China @laserchinacom - Tumblr Blog

The biggest advantage of pulsed fiber laser cleaning and removing is that it has a very limited impact on the base materials, with laser pow

This selective vaporization usually occurs when the laser beam absorption rate of the contaminants on the surface is significantly higher than the one on the substrates. One typical application case is the cleaning of dirt on the stone surface. The contaminant on the stone surface has a high absorption rate of the laser and is quickly vaporized. When the contaminants are cleaned, the absorption rate to the stone surface is very low.

Most of the laser energy is scattered to the contaminant on the stone surface, and the temperature change of the stone surface is very small. Therefore the stone surface is thus protected from damage while the contaminants are removed.

#laser marking machine #fiber laser engraver

For thick and heavy rust on metal, high-power CW fiber laser cleaner and remover is the best choice.500W, 1KW, 1.5KW, and 2KW are mostly app

The working principle of laser cleaning is complex, which may contain both physical processes and chemical processes. In most cases, it is dominated by the physical one.

When the high-energy laser irradiates on the material surface, the surface absorbs laser energy from the surface to the internal substrate. At the same time, the surface temperature rises rapidly and reaches its vaporization point so that the contaminants are vaporized from the material surface.

#China Laser Engraving

IR CW and pulsed fiber laser cleaning system is ideal cleaning equipment for removing rust, paints from metal surfaces. It is widely applied

Laser cleaning technology uses a focused laser beam to quickly vaporize or strip the contaminants on the surface of materials. Compared with all kinds of traditional physical or chemical cleaning methods, laser cleaning is without contact with materials, no consumable material needed, no pollution, high precision, no damage or damage is small to substrate materials, etc.,

#laser cleaner #laser cleaning machine

Multi-functional CNC laser equipment for engraving, cutting, etching, printing, and marking on metal, wood, glass, plastic, leather material

Different types of material require different laser types, and each laser type has a different wavelength. For metal materials like stainless steel, aluminum, gold, and silver, a fiber laser with a 1064nm wavelength works the best. For non-metal materials like wood, leather, 9.3um or 10.6um CO2 lasers are suggested. For fragile and heat-sensitive materials like plastic, glass, and crystal, 355nm ultraviolet lasers is the best choice.

U-3D engraver is with 3W 5W 10W ultraviolet laser for marking, etching as well as engraving on both flat and irregular 3D surfaces with a hi

U3D series is a professional 355nm UV 3D laser engraving and marking machine with the desktop, table and full closure design for ultimate safety during processing. It works perfectly on both metal and non-metal materials.

#UV 3D Laser Engraver & Marker

GO7 series dual axis digital galvo scanner is with high precision and speed for laser marking, engraving, cutting, welding, and cleaning mac

GO7 series dual axis digital galvo scanner is with high precision and speed for laser marking, engraving, cutting, welding, and cleaning machines. Full wavelengths like 1064nm, 355nm, 10.6um, and 532nm are available.

#XY 2D Galvo Scanner Head

JCZ LMCPCIE series laser & XY2-100 galvo head controller is developed for fiber, CO2, UV, SPI laser marking, and engraving machines. It is w

JCZ LMCPCIE series laser & XY2-100 galvo head controller is developed for fiber, CO2, UV, SPI laser marking, and engraving machines. It is with PCI Express to connect with the motherboard of IPC, which greatly enhances the stability. It is widely applied on laser automation lines.

#PCIE Laser & Galvo Controller

Multi-functional CNC laser equipment for engraving, cutting, etching, printing, and marking on metal, wood, glass, plastic, leather material

EZCAD3 is a new generation of laser processing software. EZCAD3 with the latest CAD and CAM techniques has better compatibility, higher stability, and flexibility. Now it is widely installed on laser engraving, marking, welding, cutting, and cleaning machines.

#laser marking machine

JCZ LMCV4 series laser & XY2-100 galvo scanner controller is developed for fiber, CO2, UV, SPI laser marking, and engraving machines. It con

JCZ LMCV4 series laser & XY2-100 galvo scanner controller is developed for fiber, CO2, UV, SPI laser marking, and engraving machines. It connects with EZCAD2 software via USB, which is ideal for most laser marking & engraving applications.

#laser cleaning machine

EZCAD2 laser software is designed to control both galvo scanner and lasers synchronously for laser markers and laser engravers. It was relea

EZCAD2 laser software is designed to control both galvo scanner and lasers synchronously for laser markers and laser engravers. It was released soon after the establishment of JCZ in 2004, and right now it is the most popular and stablest laser software worldwide.

#laser cleaner

Trending Blogs

Recently Viewed Blogs

Laser China