@mikehubip-blog - Tumblr Blog

DIYer's the coolest tool chest for your household

Any handyman guru should own some type of storage solution for all the tools and stuff required to make everyday jobs. If you don't have a toolbox (read also), you may just lose many hours rummaging for a suitable screwdriver or drill bit. Looking at the rows of tool chests on the market can tire anybody. In the article I’ll help to find the most portable and efficient toolbox you could find.

When choosing a metal tool box, it is better to know what features are available before buying. Some popular features often of metal tool boxes are: Drawers that provide organization of the tools in the box Latch hole for the locking of the box with a padlock when it is needed. Light or for bigger boxes - sturdy frames for extra durability and offsetting the metal container weight.

Very important feature is how the tool box comfortable carry and doesn’t it feel fragile? Great brand name promotes the long-term success of company that produce high quality products, but it often prevents worthy new products from breaking through. Buying expensive tool box doesn’t prevent you from losing a value winner. You should never give too much trust to customer reviews, rather draw your own conclusions.

Many of modern boxes are made of plastic, it has some advantages in that it’s light, has a wider variety of designs and colors and costs less. The majority of toolboxes are made of plastic, but even if this type a padlock breaking into it is a relative piece of cake. Usually we want to have as many compartments, and trays as possible, the more options we have the easier it is to do our job.

When choosing a tool box, you should consider will you use it inside or outside do you need a heavy-duty or a light-weight toolbox (toolsglobe.com/workshop-layout/tool-box-you-really-need/). A small toolbox must be designed for easy transportation, it is likely that you will be bringing it from one place to another every now and then. The best boxes offer numerous storage options, like compartments and trays. And finally storage space is very important feature of a good tool box, but that is only one of the starting points.

#besttoolbox

Ventilation system fans

In order to build an effective ventilation system that provide enough air speed to draw it through the hood, and carry through the duct system engineers often use fans of the appropriate size and type - Wiki. There are only 2 main design of exhaust fans: axial Fans look like propellers and draw the air straight through the fan; centrifugal fans look like "squirrel cages" that draw air into the center of the device and exhaust it at a 90-degree angle.

Fans on for the ceiling have long blades and low rotation speed, you can use them to direct warm air down and create slight breeze in summer. A ceiling fans are mechanical ones, usually electrically powered, suspended from the ceiling of a room, that uses hub-mounted rotating paddles to circulate air; they cool people by introducing slow movement into the otherwise still, hot air of a room. One of the most known are Harbor Breeze ceiling fans, it is the store brand of Lowe’s, and the fans are imported from China.

There are three basic types of propeller fans: propeller, tubeaxial, and vaneaxial. Propeller fans are usually used for dilution ventilation or cooling and they are often mounted in a wall or ceiling. Common examples are a free standing room fan or automobile radiator one. These fans can move large amounts of air if there is little resistance, and are not suited for local exhaust ventilation because they do not provide enough suction to draw air through the system. Tubeaxial and vaneaxial fans are essentially propeller fans made to fit in a duct, they are usually limited to "clean air" applications such as exhaust ducts going through the roof.

Centrifugal fans have three main types of blades: inclined backward and forward blades, and radial straight blades. Centrifugal fans are great for high resistance, that is usual for local exhaust ventilation systems: home furnaces, vacuum cleaners, and hair dryers. Rugged radial blades of the centrifugal fans are least likely to become abraded or clogged by the dust, so they works great for exhausting of heavy dust amounts.

On a hot summer’s day, a misting fan can be your best friend, it works on the same principle of a humidifier. A fan blows a fine mist of water into the air and if the air isn’t humid, the mist evaporates, taking heat from the air with it, this allows the misting fan to work like an air cooler. Misting fan systems range from low pressure misting fans to high pressure systems, there are also available portable misting fans with or without water tanks, from industrial strength to small portable battery-operated fans. Water quick evaporates in a dry climate, so a misting fan can work effectively.

Wet towels

Moist towelette are cleaning option for lots of different situations - from plastic surfaces to makeup removing. You can find a lot of baby wipes on the market: scented or not, thin and thick, flushable, reusable, etc. In general, moist towelette, is a small moistened piece of cloth or sometimes paper, that often comes folded and individually wrapped for convenience.

Wet towels can be used to clean any plastic surface, including televisions, mobile phones, cameras. If you have sensitive skin, have difficulty getting clean, it might be a good idea to keep wet wipes handy, just in case.

There also known baby wipes for medical use. These moistened wipes include chlorhexidine wipes, alcohol wet wipes for disinfection of surfaces and noninvasive medical devices and sporicidal wipes. Some wet wipes for medical use helps to eliminate spreading of Norovirus and Clostridium Difficile.

From the 2006 wet wipes began to be marketed as a luxury alternative to toilet paper by Kimberly-Clark and Procter & Gamble. Wet towels are often sold in Southeast Asia out of refrigerators to give the user a refreshingly cool effect. These also found a use among visitors to outdoor music festivals, particularly those who camp, as an alternative to communal showers.

Baby wipes are used to cleanse the skin of infants, they are saturated with gentle cleansing ingredients and sometimes alcohol based 'cleaners'. Baby wet wipes usually come in a plastic box, wipes inside pop up through the lid so it's easy to grab them with one hand while changing a diaper. You can also buy refill wipes for pop-up containers, they cost a little less and don't take up much room to store. Travelers use baby wipes in special rigid plastic boxes or plastic bags, that opens up with a sticker-type top.

Flushable wipes are intended to be flushable, but you should to disposed all another in general household waste to avoid blocking sewers. Flushing of even "flushable" wet wipes can cause blockages as their failure to break down UK sewer blockages. and clog sewer systems due to the 'fatbergs' growth. Alcohol containing moist towelette can suppress the bacteria used for breaking down solid waste in septic tanks.

An inalienable part of a wheel - tire

Tire – is the main wheel’s component which comes in a shape of a ring and surrounds a wheel’s rim. We use tires to provide transfer of vehicle’s load from the axle through the wheel to the ground. The second main purpose of the tire is to give traction on the surface traveled over.

The materials of modern pneumatic tires can be divided into two groups, the cords that make up the ply and the elastomer which encases them. The cords, which form the ply and bead and provide the tensile strength necessary to contain the inflation pressure, can be composed of steel, natural fibers such as cotton or silk, or synthetic fibers such as nylon or kevlar. Composed of steel, natural fibers such as cotton or silk, or synthetic fibers such as nylon or Kevlar, the cords form the ply and bead and provide the tensile strength necessary to contain the inflation pressure The key component of pneumatic tire design is the elastomer, used to form the tread and encase the cords protecting them from abrasion and holding them in place. It can be composed of various composites of rubber material – the most common being styrene-butadiene copolymer – with other chemical compounds such as silica and carbon black. Optimizing rolling resistance in the elastomer material is a key challenge for reducing fuel consumption in the transportation sector.

Before rubber was developed, the first versions of tires were simply bands of metal fitted around wooden wheels to prevent wear and tear. Early rubber tires were solid (not pneumatic). Pneumatic tires are used on many types of vehicles, including cars, bicycles, motorcycles, buses, trucks, heavy equipment, and aircraft. Railcars and locomotives still use metal tires. Various non-automotive applications, such as some casters, carts, lawnmowers, and wheelbarrows use solid rubber or other polymer tires.

Most tires, such as those for automobiles and bicycles, are pneumatically inflated structures. When the tire rolls over rough features on the surface it also provides a flexible cushion that absorbs shock. To provide a bearing pressure that will not excessively deform the surface tires have a footprint that is designed to match the weight of the vehicle with the bearing strength of the surface that it rolls over. The materials of modern pneumatic tires are synthetic rubber, natural rubber, fabric and wire, along with carbon black and other chemical compounds. A body and a thread are parts of a tire. If the body provides containment for a quantity of compressed air then the tread provides traction.

There are two aspects to how pneumatic tires support the rim of the wheel on which they are mounted. The first aspect is the tension in the cords, which pulls on the bead uniformly around the wheel, except where it is reduced above the contact patch. Second, the bead transfers that net force to the rim.

Flaring Tubes

Mechanical joint is sometimes required or preferred to join copper or steel tubes together, instead of brazing, soldering, or welding. If you connect tubes with a mechanical connection you need flaring. The process called flaring is a tube’s end forming, used for creating a gas- or liquid-tight connection.

Double-lap flaring offers additional strength for tube ends, that are subjected to more fatigue and stress. The joint is designed so that the inside surface of the flare has a larger diameter so it does not interfere with flow characteristics of the system. To meet the same specifications as the Single Flare, Double-lap flaring can be formed in the same shapes.

The 45-degree SAE style, and the 37-degree AN style, also used with the JIC system are the common standards for flare tube ends and flare fitting in use today. For a given size, the AN/JIC style tubing generally has a higher pressure rating SAE and AN/JIC connections are completely incompatible due to the different flare angle. The hydraulic hoses are usually 37-1/2° flare connections, and the refrigeration and air conditioning industry usually uses 45° flare connections. A copper tube used for propane, LP, or natural gas may use flared brass fittings of single 45°-flare type, according to NFPA 54/ANSI. Z223.1 National Fuel Gas Code. Nevertheless, all National Model Codes permit the use of flare fitting joints, the one should be consulted by the authority having jurisdiction (AHJ) to determine acceptance for a specific application

If you flare the tubing properly with the proper tools and right technique you’ll get the leak-proof joint First of all, you need to cut the tubing to the proper length using the appropriate tool. Second step is to slide the compression nut on the tubing. The last thing is to use a flaring tool kit to make a flaring itself.

Single flaring is the most common and the simplest process of flaring The single flare is available in both 37 and 45 degrees. There are two ways to accomplish a flared tube end – rotary or spinning, and a ram forming the flared end.

It’s nice to meet you on my site!

My name is Johnny, I was born in Trenton, and I am a mechatronics engineer.

I have made many different projects and I have learned mechanical engineering hands-on in a way that universities do not afford. Now, when I’ve got much know-how, I became a member of the supportive fellowship that I can rely on, a group of friends that I will contribute my growth as a person and as an engineer.

To do truly something special I’ve begun this little tech blog and look forward to providing help and share my experience with the beginners (as I was some time ago) and enthusiasts in engineering. So, don’t hesitate to ask me any question, share your experience and even criticize me – I’m ready to have new experience and learn new things

Joining tubes

Mechanical connection is sometimes required or preferred to join copper or steel tubes together, instead of brazing, soldering, or welding. To make a mechanical joint on tubes flaring is used. Flaring is used to make gas-tight or liquid-tight connection, and this process means forming the end of a tube.

If the tube ends are subjected to stress and fatigue the Double-lap flaring will offer additional strength. The inside surface of the flare is designed with a larger diameter, that does not interfere with system’s flow characteristics. To meet the same specifications as the Single Flare, Double-lap flaring can be formed in the same shapes.

The most common flare tube ends and corresponding flare fitting standards in use today are the 45-degree SAE style, and the 37-degree AN style, also used with the JIC system. The AN/JIC style generally has a higher pressure rating for a given size tubing. Due to the different flare angle SAE and AN/JIC connections are completely incompatible. The hydraulic hoses are usually 37-1/2° flare connections, and the refrigeration and air conditioning industry usually uses 45° flare connections. According to NFPA 54/ANSI. Z223.1 National Fuel Gas Code, copper tubes used for natural gas, Liquefied Petroleum, or propane may use flared brass fittings of single 45°-flare type Nevertheless, all National Model Codes permit the use of flare fitting joints, the one should be consulted by the authority having jurisdiction (AHJ) to determine acceptance for a specific application

The simplest and the most used technique of flaring is called a single flaring. The single flare is available in both 37 and 45 degrees. Rotary or spinning the flared end, and a ram forming are two available ways to accomplish single flared tube end.

Different sizes of tubes require specific sets of equipment, but most flaring kits are easy to find and relatively inexpensive. To cut a tube the special cutting tool is used. A flaring tool kit usually consists of two main pieces – a reamer and a flare form. A flare form is some kind of a clamp which has a number of holes designed to work with tubing of various diameter. It holds the pipe firmly so you can flare the pipe with minimum efforts A reamer has a conical point, a screw, and holding arms and makes the actual flaring.

Pleased to meet you!

I am Johnny, I was born in Trenton, and I am a mechanic.

I have made many different projects and I have learned mechanics hands-on in a way that colleges do not give. Now, when I’ve got much practice, I became a member of the supportive network that I can rely on, a gang of friends that I will promote my growth as a person and as an engineer.

Trending Blogs

Recently Viewed Blogs