If you cannot boot into Android then most people will say your smartphone is bricked.
However, there’s no reason to be worried because we can fix with this by downloading the firmware for your smartphone and using the program called Odin.
Next, download the firmware that matches your specific version of your device from SamMobile, Updato, SamFirm...
Boot your device into download mode.
Extract the firmware files into a folder on your computer, and load them inside Odin. Press start and wait until the green PASS status message appears.
To connect your android smartphone to your home network, select Wi-Fi and turn the toggle or button to On.
WPS (Wi-Fi Protected Setup) is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier.
Wi-Fi Direct is a standard enabling devices to easily connect with each other without requiring a wireless access point.
Bluetooth is a way to send or receive data between two different devices.
Airplane mode is a setting available on smartphones and other portable computers that, when activated, suspends radio-frequency signal transmission by the device, thereby disabling Bluetooth, telephony, and Wi-Fi.
Mobile HotSpot is an application which facilitates your Internet phone connection sharing either with your tablet or PC via a Wi-Fi connection.
USB Tethering means sharing the Internet connection of an Internet-capable mobile phone with other devices.
Data Usage allows you to minimize the amount of data your Android smartphone uses.
There are three sound modes available in an android phone.
You can change your screen's brightness, font size, display size, rotation settings, and more in the Display Settings.
Screen Lock are used to block unauthorized person access to your phone.
SIM card (Subscriber Identity Module) is a smart card that stores data for GSM cellular telephone subscribers. Such data includes user identity, location and phone number, network authorization data, personal security keys, contact lists and stored text messages.
GSM (Global System for Mobile communications) is an open, digital cellular technology used for transmitting mobile voice and data services.
GSM is a 2G standard (second-Generation) employing time-division multiple-Access spectrum-sharing.
3G came to the U.S. in 2003, with minimum consistent Internet speeds of 144Kbps. It was supposed to bring "mobile broadband".
4G, also know as LTE (Long Term Evolution), refers to mobile network technology that enables 4G compatible phones to connect to the internet faster than ever before.
Telephone prefix is the first set of digits after the country, and area codes of a telephone number.
SIMs are currently available in three sizes: Mini > Micro > Nano.
SOC is an integrated circuit that integrates all components of an electronic system. These components typically include a central processing unit, memory, input/output ports and secondary storage – all on a single substrate.
ARM also known as RISC processors (Reduced Instruction Set Computing) are designed to perform a smaller number of types of computer instructions so that they can operate at a higher speed, performing more millions of instructions per second. By stripping out unneeded instructions and optimizing pathways, RISC processors provide outstanding performance at a fraction of the power demand of CISC processors (Complex Instruction Set Computing).
RAM equals the memory of the phone, while ROM is the device's internal storage, equaling the hard disk of the computer. The bigger the RAM, the more software the phone runs smoothly; While the bigger the ROM, the more data it can store.
mAh (milliAmp hour), commonly used to measure the energy capacity of a battery, is a unit that measures (electric) power over time. For example, 3000 mah means that the battery can supply 3000 milli-Amps for one hour.
The three primary functional components of a lithium-ion battery are the positive and negative electrodes and electrolyte. Generally, the negative electrode of a conventional lithium-ion cell is made from carbon. The positive electrode is a metal oxide, and the electrolyte is a lithium salt in an organic solvent.
The resolution of camera phones is often measured in megapixels. For example, a 12-megapixel camera can produce images with 12 million total pixels.
Image sensor is a sensor that detects and conveys information used to make an image. The most common types of sensors are CCD (charged coupled device) and CMOS (complementary metal–oxide–semiconductor).
Camera lens is an assembly of lenses used in conjunction with a camera body and mechanism to make images of objects either on photographic film or on other media capable of storing an image chemically or electronically.
Aperture controls the brightness of the image that passes through the lens and falls on the image sensor. It is expressed as an f-number such as f/1.4.
EIS (Electronic Image Stabilization) is an image enhancement technique using electronic processing, that minimizes blurring and compensates for device shake, often a camera.
OIS (Optical Image Stabilization) lets photographers shoot longer exposures without reaching for a tripod by controlling the path of the image through the lens and onto the image sensor.
Camera flash provides additional light when conditions become too dark to handhold your camera comfortably.
HDR (High Dynamic Range) imaging is a technique used in photography to reproduce a greater dynamic range of luminosity.
