Why is it important to service your RO Water Purifier?
RO purifiers, of course, are one one of the best and simplest water purification systems available in the market, that homeowners rely on. It consists of mainly four filters: sedimentation filters, activated carbon filters, UV filters and Reverse Osmosis (RO) membranes. The first three filters must be replaced every 3–6 months. The layers of RO membrane however should work pretty well for more than a year after installation. Generally, good water purifiers are manufactured using high-quality, durable and efficient raw materials. But practically speaking, the lifespan of the water purifier depends on the load of contamination present in the inlet water, which clogs the filters. As a result, people may experience unpleasant odour, taste or haziness during consumption of the filtered water. Hence RO water purifiers filters should be checked and replaced every 6–8 months.
Here are some signs to look out for that indicate need for servicing:-
1. Cloudiness in purified water After purification, water is supposed to appear colorless and transparent. Any cloudiness in the water indicates dissolved impurities. You can identify such turbidity in the water by holding a see-through glass full of water against sunlight. Turbidity in the water means that the filters are malfunctioning and such water is not safe for consumption. It is a clear sign that you need to call in purifier services.
2. Unpleasant odour or taste after purification Your RO purified water may suddenly produce a slightly off taste (can be described as bitter, metallic or sour). This could be a sign of dissolved metals, solids, chlorine, sulphates, etc that might appear in your water due to malfunctioning filters. RO systems should be sanitised and cleaned from time to time to avoid this, and is also an indication for calling in services.
3. Abnormal sounds from the purifier during operation You may identify strange noises coming from the faucet that drains water from the purification tank. This occurs when there is a disturbance in water pressure within the system. As soon as the filter is replaced, if the noise does not subside, a professional might have to check the plumbing as well. Call in a RO professional to check all valves of the RO and do an overall inspection of the system.
4. Water purifier runs continuously without stopping This occurs when the on-off valve is malfunctioning or is broken. In that case the pressure in the storage tank must be measured to stop the continuous flow of water. The ideal internal pressure is around 35–40 psi. Above this level, a breakage in the valve can be suspected. For the repair or replacement of the valve, a professional can be called in.
5. Low water pressure or a water inlet issue Some common problems are caused by low inlet water pressure in RO purifiers. AS mentioned, if the water pressure is lower than 40 psi, the strength should be increased. This can be done by using a water pump made for RO water purifiers.
6. Drips or leakages in purifier If you are experiencing a drip or a leakage in your water purifier, do not delay or neglect it. You should immediately call in a verified technician. A continuous leakage may mean that a part of the purifier is damaged due to breakage. To fix that, the part must be tightened or replaced completely. Any such leakages may also arise due to loose pipelines, improper plumbing, etc. As a result, you may get a less than normal yield of water and a higher wastage if the leak is not resolved quickly.
Being a crucial home appliance, water purifiers need on-time service and regular maintenance, regardless of the brand and type. RO Care Water Purifier Services in Mysore brings to you a multi-skilled water purifier service centre that provides the best, versatile engineers who are always equipped to tackle all hassles.