Working at heights Dangerous? Read this articles!
Working at heights is not the same as working on flat and low ground. Working at height has the potential to increase the hazard. Just think if you fall from a height, definitely it hurts, right? And can cause serious injury to death.
Working at heights has a high risk of creating hazards around you. Therefore, the use of personal protective equipment is very important for personal safety. But until now, it seems that there are many workers who pay less attention to their own safety when working at heights. Although it is clear that using personal protective equipment can reduce the risk of dangerous objects hitting you.
Negligence of a worker can lead to accidents for himself, others or damage to work equipment on site. To minimize accidents when working at heights, you must pay attention to several important things when starting to work at heights :
Make sure you have a work permit to work at height
Explore and understand the fall protection system by wearing the right personal protective equipment
Secure a place to work at height
Use Personal Protective Equipment (including full-body harness ( CS 2 Harness), lanyard, and/or lifeline,) correctly
Before you start work at height, make sure the full-body harness is in good condition
Hook the hook higher than your waist to reduce the amount of impact when you fall
Use a standard ladder/scaffolding to get to a high workplace
When using the stairs, look at the angle of the slope and the position of the stairs must be stable
If you are using scaffolding, emphasize that the scaffolding pipe connections have been tied to a maximum at each end.
After the scaffolding is installed, ask the officer to check and install a safety sign
After the job is done, clean up the place like the previous situation
Don’t forget to close your Work Permit
Working at Height Training
working at heights or working at heights has a great potential for danger. There are various methods of working at heights such as using scaffolding, ladders, gondola and Rope Access Technique (RAT).
Each way of working has advantages and disadvantages and different risks. Therefore, the board and management need to take into account the use of methods by taking into account the aspects of effectiveness and risks, both financial and non-financial. The risk aspect of occupational safety and health hazards must be the main concern of all parties in the workplace. This is in addition to providing guarantees of occupational safety and health for work safety, it is also closely related to the safety of production assets.
Read also Get to know the history and function of rope access
Currently, work at heights has developed with the Rope Access Technique (RAT). This method was developed from rock climbing and cave exploration techniques. Rope Access Technique (RAT) has been widely applied in the construction, maintenance and installation of industries such as tall buildings, power grid towers, communication towers, oil platforms, ship maintenance and repair, bridge maintenance, confined spaces. space), mining, tourism industry such as outbound, forest research and maintenance, etc.
In-Law no. 1 of 1970 concerning Occupational Safety mandates that management is obliged to show and explain to every worker the conditions and hazards in the workplace, required safety equipment and personal protective equipment (PPE), personal protective equipment and safe ways and attitudes in doing work. In addition, the management can also trust workers who are believed to only understand occupational safety and health. On this basis, it was felt the need for a guideline for working at heights using the Rope Access Technique (RAT).
The purpose of the preparation of this guideline is as tips for stakeholders such as entrepreneurs, workplace administrators, operators, technicians, building owners, architects, and industrial practitioners who will and have applied the Rope Access Technique (RAT) method at work and for supervisors. employment in conducting occupational safety and health supervision.
These guidelines are the minimum criteria that need to be met by workplace administrators, workers, and all parties who carry out work at heights using the Rope Access Technique (RAT). Therefore, this guide contains some basic technical provisions. Procedures and working methods and equipment standards in detail are developed in accordance with advances in science and science and technology.
Get working at heights training here !
Get IRATA CERTIFICATION Before working at height
IRATA (Industrial Rope Access Trade Association), is the first Rope Access organization founded in the 1980s to provide maintenance solutions in the Oil & Gas Industry. IRATA itself is known throughout the world, and has more than 200 companies registered as official members. IRATA has also certified more than 100,000 technicians worldwide to date.
Rope Access Technique (RAT) is a method used by workers to reach places that are difficult at height, which must be supported by ropes and related equipment to gain access to and from the workplace.
Information about the an expert working at heights company base in Australia
High rise painting company : Alltech Coatings
High rise window cleaning company : Alltech Abseilers
Anchor point Design and Installation : Skypro Height Safety










