High Build Epoxy Primer and Finish Coat for the Rail Industry
RWIP120 Two-Pack Epoxy Primer Finish This high-performance coating for the rail industry is an epoxy air-drying solvent-based coating, with low VOC content, specially developed as a single coat application, or multi coat system for application to a wide range of substrates. RWIP120 is part of a family of coatings manufactured from a high grade two-part epoxy system initially procured for use in aerospace applications and developed for use within the rail industry on underframe components, including wheelsets, bogies, air reservoirs and motors (new and refurbished) and heavy engineering. RWIP120‘s performance covers a long list of rail industry challenges. Including impact, chip and scratch resistance and the ability to withstand high humidity. Alongside resistance to abrasion, salt spray and wash plant operations. The cured coating provides excellent corrosion protection on steel, aluminium and galvanized substrates, as well as in immersed conditions. It is a tough, chemically resilient finish that has been tested against a variety of corporate and national standards. The coating performs in temperatures ranging from +200 ºC. down to -50 ºC and can also be applied directly to GRP and composite substrates. Applied as a single or two coat application, by airless spray, conventional spray, or brush / roller, and can be overcoated with itself or other Indestructible Paint finishes, epoxy’s and polyurethanes. Read the full article