How to make good use of the automatic labeling machine?
How to use the automatic labeling machine well? Many friends don’t know much about the use of automatic labeling machines. In fact, for the operation of this type of machine, we only need to make some machine adjustments and remember the operation steps of the machine clearly. It is easy to use, so how to make good use of the automatic labeling machine?
1. First, we need to set up the automatic labeling machine
The distance from the peel plate to the bottle should be minimized;
The pre-mark distance should be reduced. Note that this will lead to changes in the style of the automatic labeling machine, for example, the pressure belt type requires more pre-gauge length than the scraper type (please consult the labeler supplier for details);
If PET backing paper/transparent surface material is used, it is necessary to use a label positioning sensor suitable for transparent materials, such as an ultrasonic sensor or a capacitive sensor;
When the label first contacts the surface of the bottle, simultaneous application of pressure is required to ensure that all air under the label is expelled, thereby avoiding air bubbles and wrinkles. "It is not recommended to touch the label after labeling";
In some cases, such as carton labeling, in-line automatic labelers use brushes and low-density foam rollers to apply labels. However, for pressure-sensitive label applications, such as film labels on glass/plastic/wine bottles, brushes and low-density foam rollers are not recommended because the labeling requirement at this time is to achieve a labeling surface that is free of air bubbles and wrinkled. These devices do not exert sufficient pressure on the label surface and therefore do not exhaust the air beneath the label;
Slowly apply enough pressure from the edge of the label to the back edge to ensure that the label is truly "fit".
2. The steps of using the automatic labeling machine
Turn on the main power switch. Turn on the power switch on the left side of the automatic labeling machine. After the automatic labeling machine is turned on, enter the password on the touch screen to enter the system. After the label paper is installed on the automatic labeling machine, various parameters can be adjusted through the touch screen. Debug the position of the electric eye for measuring objects, and adjust the sensitivity of the electric eye for marking. Adjust the appropriate speed. Adjust the labeling position to ensure that the label peeling part is aligned with the labeling position. Press the run button, the system runs. After the automatic labeling machine is used normally, remember to shut down and turn off the power.
The above is how to use the automatic labeling machine. If you want to make good use of the automatic labeling machine, you must set up the automatic labeling machine. This can ensure the labeling effect of the automatic labeling machine. The operation process of the automatic labeling machine must also be Remember clearly, follow the steps step by step.
How to use the automatic labeling machine well? Many friends don’t know much about the use of automatic labeling machines. In fact, for the
