#bitwar data recovery software

[joyjoymimi]

7 FASTEST SOLUTIONS TO FIX USB DEVICE MALFUNCTIONED AND NOT RECOGNIZED ERROR

Solution 1. Remove and then plug the power supply to fix the USB device malfunctioned error.

Unplug the USB device from the Computer >> Turn off the computer >> Remove the power supply of the computer >> Plug the power supply back to the computer after 20-30 seconds >> Restart the computer >> Plug on the USB device again

Solution 2. Unplug the USB device and reconnect with a computer

Unplug the USB device from the computer >> clean the USB port of the device clamp the position of the USB port and flash chip inside the USB housing >> Reconnect the USB device with a computer

Solution 3. Configure the USB Root Hub

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on USB Root Hub >> Properties >> Power Management >> Check to Allow this computer to turn off this device to save power >> Click Ok >> Plug the USB device again with the computer.

Solution 4. Disable and then enable the Generic USB hub

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on Generic USB hub >> Disable >> After that then click Enable >> Click Ok >> Plug the USB device again with the computer.

Solution 5. Update the USB device driver to fix the last USB device malfunctioned error

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Update Driver Software >> After update >> Click Ok >> Plug the USB device again with the computer.

Solution 6. Uninstall the universal serial Bus controller then reinstall

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Uninstall >> Reboot the computer>> Plug the USB device again with the computer >> The system will reinstall the driver for you and then fix the last USB device malfunctioned error

Solution 7. Disable USB selective suspend

Press WIN X and then choose Power Option >> Change Plan setting >> Change advanced power setting >> USB settings >> USB selective suspend setting >> Disable On battery and Plugged in >> Save the settings >> Plug the USB device again with the computer

Look here for more about fix USB device malfunctioned and not recognized in Windows with best USB recovery software!

[darkblu32]

Fix “Cannot Open Volume For Direct Access” Error

The issue can occur on Windows 10, 8, 7, Vista, XP, Server 2008 or any other Windows version. This error message occurs when the chkdsk utility is arranged on a damaged disk. The exact error message might be similar to the following: “Cannot open volume for direct access”. The type of file system is NTFS. IFSUTIL: Can’t open the drive. Status returned = c0000043. 

Windows has finished checking the disk or Cannot open volume for direct access. chkdsk is not recognized as an internal or external command, operable program or batch file.

Why cannot open volume for direct access?

1. The disk being checked or fixed by chkdsk command is corrupted or damaged.

2. The storage device is dirty and has to be replaced by a new one.

3. Some third-party software such as antivirus application or disk monitor tool has the disk locked so that it can scan the disk or monitor changes

4. Windows do not install the latest service pack.

How to fix the “Cannot Open Volume For Direct Access” issue?

Solution 1: Disable third-party service that might lock the device

This may be caused by a 3rd party application locking the partition such as a virus checker or disk monitor tool. At this time, you can disable the service or uninstall the software as follows.

Solution 2: Recover data when chkdsk cannot open volume for direct access?

Since some repair operations do harm to data stored on storage devices, you should backup or recover data from the disk which shows “cannot open volume for direct access”. 

If you can open the disk and access files in it, you can just copy data to another disk; if the disk is no longer accessible, you can try Bitwar Data Recovery software to help you retrieve files.

Bitwar Data Recovery software is designed to easily recover deleted, formatted or inaccessible files from Windows hard drive, External hard drive, laptop, SSD, memory card, USB drive, SD card, digital camera, multimedia player and other storage devices.

Look here for the best data recovery software to recover deleted file!

[darkblu32]

Free Fix Preparing Automatic Repair Loop on Windows 10!

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error.

Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

RECOVER DATA FROM A COMPUTER THAT STUCK ON A BLACK SCREEN

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc.

Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

METHODS TO FIX “PREPARING AUTOMATIC REPAIR LOOP“ ON WINDOWS 10

1. Refresh or Reset PC

You can refresh pc to fix windows 10 preparing an automatic repair loop.

Shut down your windows forcefully. Then the system will enter the boot repair page after 2–3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup.Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

If the “Windows Automatic Repair” loop still exists, please try the last methods — performing a system restore. To do it, in the Windows Boot Options menu, choose Troubleshoot > Advanced Options > System Restore. Follow the Wizard instruction and select the appropriate restore point. Finally, click Finish to restore the system.

Refer here for the best data recovery software for windows to Fix Preparing Automatic Repair Loop on Windows 10.

[darkblu32]

Fix “Cannot Open Volume For Direct Access” Error

The issue can occur on Windows 10, 8, 7, Vista, XP, Server 2008 or any other Windows version. This error message occurs when the chkdsk utility is arranged on a damaged disk. The exact error message might be similar to the following: “Cannot open volume for direct access”. 

The type of file system is NTFS. IFSUTIL: Can’t open the drive. Status returned = c0000043. Windows has finished checking the disk or Cannot open volume for direct access. chkdsk is not recognized as an internal or external command, operable program or batch file.

Why cannot open volume for direct access?

1. The disk being checked or fixed by chkdsk command is corrupted or damaged.

2. The storage device is dirty and has to be replaced by a new one.3. Some third-party software such as antivirus application or disk monitor tool has the disk locked so that it can scan the disk or monitor changes4. Windows do not install the latest service pack.

How to fix the “Cannot Open Volume For Direct Access” issue?

Solution 1: Disable third-party service that might lock the device

This may be caused by a 3rd party application locking the partition such as a virus checker or disk monitor tool. At this time, you can disable the service or uninstall the software as follows.

Solution 2: Recover data when chkdsk cannot open volume for direct access?

Since some repair operations do harm to data stored on storage devices, you should backup or recover data from the disk which shows “cannot open volume for direct access”. If you can open the disk and access files in it, you can just copy data to another disk; if the disk is no longer accessible, you can try Bitwar Data Recovery software to help you retrieve files.

Bitwar Data Recovery software is designed to easily recover deleted, formatted or inaccessible files from Windows hard drive, External hard drive, laptop, SSD, memory card, USB drive, SD card, digital camera, multimedia player and other storage devices.

Look here for the best data recovery software to recover deleted file!

[joyermimi]

5 Solutions to Fix Grayed Out Folders Or Files on Mac

There are several issues that a Mac computer user comes across and some of them may even lead to data loss. One of the issues is when the folders and files turn greyed out on your Mac system, and it restricted you from accessing your data in it.

There is nothing to panic if you ever face such an issue, as this article will walk you through the 5 best solutions to fix Grayed Out Folders Or Files on Mac with the free Mac Data Recovery Tool!

Why Grayed Out Files or Folders Occured on Mac?

When grayed out files or folders shown on your Mac, it means that some error is detected and the data becomes inaccessible. Some factors are contributing to this issue, such as:

Faulty File System Entry.

Power Failure.

Hard Drive Formatting.

Operating System Crash etc.

Solution 1: Fix Mac Folders or Files Grayed Out with Xcode

The best solution to fix grayed out folders or files on Mac is by changing the date, but please note that this solution requires the users to download Xcode from the App Store.

Refer here for the data Recovery software for Mac to recover lost data from Mac folders!

[joyermimi]

Best Free Picture Recovery to Recover Lost Photos on Windows

Have you ever lost pictures from your computer? How did you get it back then? Have you found yourself been in trouble to find the best picture recovery software to rescue the lost images? We understand the frustration of losing important data, particularly your photos and videos which serve as memories of special events. Don't worry, and your lost pictures can be recovered.

Why the lost photos can be recovered？

Here is the explanation. When data files are deleted from the computer, they have not been deleted, and the system just hides the data by removing its file directory and mark the space as free for use. So that the file entry won't be displayed in My Computer or a command line DIR command, etc. However, if you continue using your computer and save data, you will end up occupying location with new files. Then your files are totally deleted. Hence, if your photos have been accidentally lost, don't be panic. You still have a chance to recover them with the best free Picture Recovery. So we recommend you Bitwar Data Recovery to help you to recover deleted pictures.

What is Bitwar Data Recovery?

Bitwar Data Recovery is a fast, reliable, powerful, and free Picture Recovery software that can recover deleted files for PC quickly. It supports to recover lost pictures due to deletion, formatting, virus attacking, system crash or other unknown reasons under Windows 10/8/7, etc. Only three simple steps will help you restore all lost images. And also allows you to preview them to make a selective recovery.

How to recover lost pictures with Bitwar Data Recovery?

You can free download this best photo recovery software here and install it to recover your photos now. Note: please don't install the software or store any data on the partition that contains lost files.

Look here now to Restore Photo on your Windows!