Product Description for each style of Geek Vape Coils.
Geek Vape makes some really innovative pre-built coils. We are gonna break down the unique qualities and different features of the various styles they have created. All Coil Packs are just $4.95 at VaporLeaf.com.
Geek Vape Alien Clapton Coil Pack Description:
The Alien Clapton coils from Geek Vape have a single ribbon wire core with the iconic wavy “Alien” wire wrapped around it. The ribbon wire core is 26ga thick by 16ga wide, or 0.4mm thick by 1.3mm wide, which is a very hefty piece of ribbon. The wire wrapped around the ribbon is 30ga round. Both wires are Kanthal A1, a very common wire type that works perfectly for running in the standard wattage or “power” mode. Each coil comes with 5 wraps which lands them at 0.4 ohms each, for a combined resistance of 0.2 ohms, but they also have enough extra wire on the leads to add or subtract wraps as necessary to achieve the size and resistance you want.
Geek Vape Staple Staggered Fused Clapton Coil Pack Description:
These coils have quite the mouthful of a name, but are really quite simple as far as fancy coils go. The ribbon wire buried in the middle of it all is 32ga thick by 20ga wide, which is about 0.2mm thick and 0.8mm wide. On either side of the ribbon is a 24ga wire wrapped with 32ga, with a 34ga wide space between each wrap. This space is filled by the 34ga that fuses the entire assembly together, which holds the wrapped 24ga parallel to the ribbon wire on each side. Essentially, these coils are like a Staggered Fused Clapton, but spaced in the middle to make room for the ribbon wire. All of the wire is made of Kanthal A1, a very common wire that works perfectly in the standard wattage or “power” mode. Each coil comes with 4 wraps which lands it at 0.4 ohms each, for a combined resistance of 0.2 ohms, though there's enough extra on each lead to add or subtract wraps as necessary to achieve the size and resistance you want.
Geek Vape Staggered Fused Clapton (Kanthal A1+Ni80) Description:
The Staggered Fused Clapton starts with two parallel wires, which in this case are 26ga Kanthal A1. Those wires are wrapped individually with 32ga Kanthal A1 with a 32ga sized space between the wraps. Each of those wires are then fused together by wrapping 32ga Nichrome (Ni80) around both of the parallel wires in the spaces between the existing wraps. These coils come with six wraps which lands them at 0.9 ohms each, for a combined resistance of 0.45 ohms, but there's enough extra on each lead to add or subtract wraps as necessary to achieve the size and resistance you want. These coils would be a good option for a rebuild-able atomizer with more limited space, because the resistance is higher. That allows you to take off more wraps to make the coil smaller, without ending up with an unusable resistance.
Geek Vape SS316L Staggered Fused Clapton Description:
The Staggered Fused Clapton starts with two parallel wires, which in this case are 26ga Stainless Steel 316L. Those wires are wrapped individually with 32ga SS316L with a 32ga sized space between the wraps. Each of those wires are then fused together by wrapping 32ga SS316L around both of the parallel wires in the spaces between the existing wraps. These coils come with six wraps which lands them at 0.5 ohms each, for a combined resistance of 0.25 ohms, but there's enough extra on each lead to add or subtract wraps as necessary to achieve the size and resistance you want.
Geek Vape Kanthal A1 Juggernaut Clapton Coil Description:
Geek Vape's Juggernaut Clapton coil is an exceedingly unusual coil. Like a Staggered Fused Clapton, it starts with two 28ga Kanthal A1 cores, each of which are then wrapped with 38ga Kanthal A1. Where it gets unusual is when you fuse the two with 38ga thick by 24ga wide, or 0.1mm thick by 0.5mm wide, ribbon Kanthal A1. These coils come with 6 wraps which comes to about 1.4 ohms each, for a combined resistance of 0.7 ohms, though there's enough extra on each lead to add or subtract wraps as necessary to achieve the size and resistance you want. Given the high resistance, these lend themselves well to smaller building spaces, as you can take off more wraps to get them small enough, without ending up with an unusable resistance.
Geek Vape SS316L Juggernaut Clapton coil description:
Geek Vape's Juggernaut Clapton coil is an exceedingly unusual coil. Like a Staggered Fused Clapton, it starts with two 28ga Stainless Steel 316L cores, each of which are then wrapped with 38ga SS316L. Where it gets unusual is when you fuse the two with 38ga thick by 24ga wide, or 0.1mm thick by 0.5mm wide, ribbon SS316L. These coils come with 6 wraps which comes to about 0.8 ohms each, for a combined resistance of 0.4 ohms, though there's enough extra on each lead to add or subtract wraps as necessary to achieve the size and resistance you want.
Geek Vape Caterpillar Track Clapton Description Kanthal A1:
The Caterpillar Track Clapton coil from Geek Vape is essentially a fused Clapton with four cores, which is then flattened out a bit before being wrapped. The coils were named as such because they resemble the caterpillar tracks on tanks and construction equipment. The four cores on these coils are all 28ga Kanthal A1, which are all fused together side by side with 30ga Kanthal A1. They come with five wraps which makes them about 0.7 ohms each, for a combined resistance of 0.35 ohms, though there's enough extra on each lead to add or subtract wraps as needed to get the size and resistance you want.
Geek Vape SS316L Caterpillar Track Clapton Coil Description:
The Caterpillar Track Clapton coil from Geek Vape is essentially a fused Clapton with four cores, which is then flattened out a bit before being wrapped. The coils were named as such because they resemble the caterpillar tracks on tanks and construction equipment. The four cores on these coils are all 28ga Stainless Steel 316L, which are all fused together side by side with 30ga SS316L. They come with five wraps which makes them about 0.6 ohms each, for a combined resistance of 0.3 ohms, though there's enough extra on each lead to add or subtract wraps as needed to get the size and resistance you want.
