The most accurate speaker and room calibration software that delivers reference sound just in 15 minutes.
Since moving studios back in October 2016, the sound of my mixes had deteriorated drastically. When listening back to the mixes on speakers in dBs, studios, the car and iPhone speakers the low-end frequencies from 300Hz were always too loud. This was due to untreated listening conditions. Sonarworks was recommended to me by DJ Krust as an alternative option to sound proofing due to the cost and acoustic calculations which need to be done to achieve a professional listening environment. Sonarworks is a speaker calibration software which measures the acoustic characteristics of the room by emitting a sonar and sine sweeps through the speakers and recording it back into the software through a microphone. The microphone needs to be placed in 24 different locations in and around the listening position to plot out the acoustic characteristics of the room. This is presented on a frequency graph which is loaded into the Sonar Works Reference 3 plug-in then placed on the master out. Reference 3 alters the frequencies coming out both monitors concerning the plotted response of the room. Below is a picture of my rooms frequency response which was recorded with an SE Electronic A200. .