Top 3 methods to maintenance your compost turner easily
The function of organic fertilizer turning machine is to quickly decompose garbage and shorten fermentation cycle. The biggest advantages are crushing, aerobic, promoting microbial reproduction and rapid volatilization of water. With high efficiency, stable operation, durability and even turnover, it is an important tool in the production of biological fertilizer project.
Maintenance of organic fertilizer Dumper:
1. No one shall pass through the stacker before and after production; Press the alarm before driving and keep personnel away from the machine to prevent accidents.
2. No maintenance or lubrication is required during fertilizer manufacturing.
3. When turning over the organic fertilizer dumper, you must walk at the specified speed and do not operate at overspeed.
Specification of organic fertilizer Dumper:
First. Pre commissioning inspection
1. Check whether the lubricating oil of the reducer and each lubricating point is sufficient.
2. Check the power supply voltage. The rated voltage is 380V. The voltage drop is not less than 15% (i.e. 320v) and not more than 5% (i.e. 400V). If it exceeds this range, do not start.
3. Check whether the connection between the motor and electrical components is firm, and ground the motor with wires to ensure safety.
4. Check whether the connectors and connecting bolts are secure. If it is loose, it shall be tightened and welded.
5. Check the stacking height of materials.
Manure turning equipment for running organic fertilizer turning and throwing machine. If the rotation direction is opposite, stop immediately and replace the three-phase circuit connector to change the rotation direction. When the equipment is running, listen to the abnormal noise of the reducer and touch the bearing. If the temperature is within the temperature range, observe whether the rotating mixing paddle rubs the ground.
1. First, start the stacking equipment of the organic fertilizer dumper, start hoisting, and slowly place the dumper drum at the bottom of the fermentation tank.
3. The electric control system shall work stably, start and stop sensitively and act accurately. In case of any abnormality during the above operation, stop the machine immediately for inspection and troubleshooting.
4. In the process of the tipper, it is found that the blade of the tipper can prevent the equipment from starting overload and damaging the motor.
Before tipping the organic fertilizer machine, check whether there is material accumulation before tipping, and then lift the tipping machine above the high accumulation point of materials in the tank.
More detailed info on compost fertilizer machine, go to https://compostturnermachine.com/