#diycaravan

[carolynscamper]

I have never spent so much time correcting mistakes

November 1, 2020

Early in the building process, I made a comment about respecting the craftsmanship of seasoned builders. That has never rang more true than right now.

About 10 days ago the camper was completely primed and painted. But all of the cosmetic imperfections that I thought would be covered by the paint job looked worse. I was so upset. How could this happen when I spent SO much time filling and sanding before I painted? (1) Lack of experience working with fiberglass finishes (2) hard to see problem areas with between layers of fiberglass and filler (3) garage lighting (4) wanting to reach my October 31 goal.

I thought about selling it (again). I considered just painting the whole thing black. I tried to convince myself it didn’t look that bad (it did). None of these would work for me. My only option was to find all the patience I had to sand it down, fill the areas I missed, laminate it with another thin coat of fiberglass with silicone additive, and repaint it. I was and still am heartbroken but thankful the problem was fixable.

I’ve never sanded so much in my life. I’ve spent between 30-90 minutes sanding everyday for the past 10 days. My garage is a complete mess. I bought a freaking shop vac. I am about 4 weeks behind schedule now and I definitely don’t have a camp ready camper like I thought I would. But... The shell looks amazing. So much better than before. So much smoother and stronger. Definitely worth the time. Because if I continued pouring time and energy into this project with the disappointment I had, I would've probably just trashed it. 

I have a few more areas to address but I am on track to have it painted in the next few days. I am so eager to get the windows and doors installed.

A photo of the door, pop top and camper completely primed with all the imperfections glaring at me. The front could use the most attention but will be the least seen so I started my cosmetic attention the the rear and sides.

After painting, I sanded it back down to even and fill.

Close up of the shell after sanding. You can see the texture of the cardboard, which was something I didn’t expect or like. Even though it’s not completely flat at this point, all of the texture went away after going back over it with epoxy resin.

The shell was significantly smoother after another layer of epoxy resin. You can still see some of the streak and brush marks but that will be sanded down before applying the primer and paint.

[carolynscamper]

Update: Managing My Own Expectations

It’s been a few weeks since I updated. I promise to be better at this. I just haven’t made as much progress as I expected. Whenever I go to the garage to work, I leave thinking “I only got [some small project/goal] done and that’s not worth sharing.” Fast forward 3 weeks and I’m in awe of all that I’ve accomplished so far. So, I’m pulling myself out of this funk and will post as much as I can, not matter how small. 

2 Weeks of Mini Projects and Corrections

Resize and reinstall that piece. Measuring 2, 3, 4 times before cutting. Grind that nail off. Sand that edge. Sometimes I’ll spend 2 hours and only get 2 wall panels up. In the moment, it feels like a really slow pace. But in reality, I’m using that time to double check my work, resolve issues, and consider all the other components around it. When I started, I had a goal to have it “camping ready” by Halloween. That deadline is looking murky these days but I’m not even upset about it. I’m just proud of how good it looks at this stage.

Framing

I get more confident with this project the further I get into it. Framing started off light and wobbly. Now it’s light and solid and the shell isn’t even on yet. Ugh, I can’t believe I started from scratch.

Windows

The windows were backordered when I ordered them a few weeks ago but they are supposed arrive by Oct 5.

Door

I decided to build my own door. It fits. That’s all I can say about it for now. I expect to spend 8-12 more hours on it sanding, fiberglass, painting, positioning, and weatherstripping. I’ll probably dedicate a whole week to getting the door in and functional. 

Pop top

Although I haven’t started the pop top I’m constantly engineering it in my head. One thing I did this week was widen the pop top area on the camper. Now, we’re less likely to bump our head coming in and out. Once the interior is framed enough to work on the outer shell, I’ll start working on the pop top mechanics. 

Shell

The plan is to still fiberglass over cardboard. Fingers crossed, I’ll be ready to make my fiberglass order this week!

[carolynscamper]

Progress Check! It had been over a month since I rolled the camper out of the garage to clean up. Seemed like a god time to share progress and think about where I should focus next.

[carolynscamper]

More Framing, Rework, and Problem Solving

Thank you to everyone that wished me well through my surgery. It was my first time being completely under and I didn’t know what to expect from recovery but everything went well and I was back on my feet within a few days.

Before surgery I thought I would be working on electrical by now. However, while recovering my focus went to weight consciousness and ensuring I don’t go over my 2,000 lbs limit. My original plan was to cover the camper in plywood and fiberglass. The 1/4″ plywood I selected is about 22 lbs per 4′ x 8′ panel. I estimated it would add 300 lbs to my weight. So, after searching all the self-built camper and teardrop groups/forums/websites for lightweight alternatives, I decided to use the corrugated cardboard composite core method used commonly on homemade surfboards and boats. For those interested in more details, I have referenced this Nomadic Research Labs article a lot this week.

Framing Progress Framing is coming along. The frame that I created before surgery was a great start but this week I needed to build the bunk beds and dinette/bed. There was a lot of measuring and a lot more mistakes. At this point I’m about 90% done with the bunk beds and 50% done with the dinette. I thought I would knock it all out over the long weekend but instead I’ll keep working on it a bit every day this week.

I’ve decided to hold off on electrical until the fiberglass shell is complete. So my next purchases will be fiberglass cloth, epoxy, and windows.

[carolynscamper]

Framing

August 23, 2020

I went into this week hoping to tackle a short punch list and ended the week with a 95% complete frame. This type of progress gets me so excited.

I decided on vinyl peel and stick floor tiles for the floor. I want the tiles to be the flooring for our storage areas as well so I put it down before building the dinette and bunk beds.

Framing was fun. It take patience and precision but watching the puzzle come together was great. I have such an appreciation for good craftsmanship. I spent a lot of time making adjustments, re-measuring, and swapping tools to ensure everything fit as nicely as possible.

The frame is very light. It will be skinned by 1/8 plywood and then fiber glassed. The three combined will make a very sturdy and comfortable camper. The interior will have a layer of insulation. I haven’t decided on the interior wall panels yet. I will probably go back to Lowes to see and feel all the materials before making a decision.

Weight is on my mind this week. It’s really important that the camper stay under 2000 lbs. I have a 3500 lb axle rating but the Coleman camper manual suggests keeping the weight lower. Right now my weight sits around 300 lbs. I estimate that 1/8 ply, fiberglass, insulation, and walls will add 85-100 lbs based on the weights of those products and how much I think I’ll need.

Once the framing was mostly done I used painter’s tape to map out the floor plan. We’ll have:

Bunk beds for the kids in front

A small kitchenette

An outdoor shower

A dinette that turns into a queen bed

Some creative storage areas

You’ll also see a rectangle shape in the roof. That’s because I am engineering a pop-top roof similar to the European Eriba caravan. 

I am having minor surgery so I won’t be able to work on it that much this week. But I will get lay in bed and watch electrical and plumbing tutorials over and over and over again.

[carolynscamper]

Subfloor

August 16, 2020

One thing I’m learning through this process is that my estimates for completing tasks have been way off. For instance, it took me the whole weekend to finish the subfloor when I thought it would only take me a day. Or that I thought it would take me a whole day to fabricate a new entry step and it only took me 20 minutes.

Subfloor layers:

OSB Framing support and insulation (Liquid Nails applied throughout) 1/4 plywood underlayment Spray can foam insulation for the cracks and gaps

To be honest, I probably overdid the subfloor. Someone more experienced could probably get a decent foundation without this much work. Also, my body hurts. But, I have a strong foundation and that feels great.

Shoutout to my neighbor, Dave, who stopped by to check out the progress. He helped me take off the broken jack stand and gifted me a router!

I’m focusing the next week on pacing myself. It’s been a sprint couple of weeks and I know I won’t be close to done until Halloween.

Next I’ll install sheet vinyl flooring, install the entry step, and start the framing. I have dreams about framing. I am constantly engineering and re-engineering my approach in my head. Will I finally use the Pythagorean theorem in real life!? 

[carolynscamper]

Demolition

7/24/2020 It’s Demo Day

In reality, it took all weekend. HGTV has always made demo day seem so easy. Well I’m here to tell you it’s trash. It’s dirty and stinky. We had to use a sledgehammer a lot and I didn’t like it as much as I thought I would.

We quickly realized the entire roof was full of mold and rot. The base hid old hornets nests and lots of spiders. I’m not gonna lie, at one point during demo I thought I was in way over my head. Thankfully, my husband was all about the sledgehammer and literally crushed it.

So much mold oh my god. We were trying to figure out how to break the roof down and finally realized the roof was rotten enough to crumble right off the brackets. 

This is how far we got on Saturday night. I rented a 9x12 Uhaul trailer for the next day. We had way more debris than I expected and we needed to take it to the landfill ourselves.

Sunday morning Derek bought an angle grinder and by Sunday afternoon the trailer was completely bare. We took a family trip to the landfill “to see the cool dumptrucks and vultures” (it was v. gross). And I finished by powerwashing the grit, loose rust, cobwebs, hornets nest, and remaining dust off the frame.

Here’s a list of items we kept from the original camper that I hope to reuse in the new camper:

The awning which is in really good shape.

The sink

The stove

The converter

1 cabinet

1 bench seat

One of the slideout posts

The water and electrical inlet sockets

The door

The entry step

[carolynscamper]

I found this 1992 Coleman Pioneer Newport pop-up camper on Facebook Marketplace for $350. And just like that, we have our base.