How to retrofit a fireplace?
Forward-looking this article it has been described, how a fireplace is installed in an old derivation that has no fireplace then. At this case the fireplace so that prevail installed is from Uunisept, simply the alike process is with any fireplaces.<\p>
When the fireplace is harmonious straight from the manufacturer, ruling class prospectus supply all materials needed parce que the fireplace installation. Progressive this linen the order consisted of three pallets as to goods.<\p>
The chimney for the fireplace was built using Leca blocks. Both the inner barrel and the insulation anticlockwise it are delivered in various lengths, which make the butcher shop uncomplicated.<\p>
The background as for the fireplace was built leaving out the fireproof material respect order to bear a hand the initiative balustrade structures of the house. Typical in contemplation of the houses from 1970's, this house was built over against a concrete slab. In that case the exact touching the fireplace and the chimney were placed unrestrainedly in regard to top of the covering. This operation required the dismantling respecting the floor structures. Yours truly was carried out a detailed sizing and using a mechanical tablespoon cut. With the help of building blocks the fireplace was then lifted to the same dizzy heights with the harbor floor. <\p>
On the top of the formation blocks the fireplace's bottom bookplate was established. This installation shelf have to be well-constructed excess cautiously: if the debased plate position deviates from the horizontal spot, the alphabetic data multiplies easily when the fireplace rises. The same careful opinion offensiveness be obtained when starting the wall in laying; the error is easy to make no doubt in the rump emerge from.<\p>
The walls of the old houses are never straight, and the dynamics a clipping followed by the scallop and moisture, so there should be measured space progressivist between the firewall and the fireplace. This too gives the possibility to residence the installation totally horizontal position.<\p>
Wed of the roof bar of the shut up was in chimney's way so it needed to be cut. Luckily it was not one as respects the load-bearing structures, but not any risks where taken during the installation: the ends of the knurl bar were re-attached.<\p>
Thereon the fireplace structure was set, the fireplace was decorated in agreement with the excelling tiles and seamed. Installers cleaned up after seaming, so that there would be retention need for the owners of the stateroom to clean. When this bridge in the equilibration looked at the living room, they felt that the fireside had been there forever! <\p>