It is that thickness 2525 is 3.0 millimetres of new ultrathin devices that Vishay introduces the area of position occupied
A few days ago, it was 2525 that Vishay claimed to put out the area of position occupied, the thickness was only 3.0 millimetres and had 1.0& micro; H- 22 µ H The new device of the inductance, thus has expanded inductor series IHLP of its ultrathin, high electric current.
Rely on capsulating lowest DCR/µ in the size classification respectively; H, these new IHLP inductors become and face the stabilizator module (VRM) in the terminal products And run to direct-flow converter applied small-scale high performance, low power consumption solution continuously, these terminal products include the movable termination of new generation; Notebook computer, desk-top computer, server, display card, walkie game apparatus, personal navigation system, personal multimedia apparatus and car system; Ultrathin high electric current power and load are clicked (POL) Converter; Distributed power system; Field programmable gate array (FPGA) .
Vishay Dale IHLP‑ 2525CZ‑ Inductor area of position occupied 11 is small, it is only * 0.270 inches [* 6.86 millimetres for 6.47 millimetres ] for 0.255 inches, and have the ultrathin thickness of 0.118 inches [3.0 millimetres ]. Like super-thin IHLP device, the area of position occupied of these devices is standard 2525, and can offer more high rated current and lower DCR value.
The saturation current rage specifications of these new devices are 2.5A- 9.5A, the typical DCR value range is the 7.6m&-#; 8486; -128.9mΩ ,The largest DCR value range is the 8.0m&-#; 8486; -135.0mΩ . The tolerance of standard inductance is ± 20%.
IHLP‑ 2525CZ‑ 11 inductors can be dealt with high transient current peak value in case of hard saturation, and can run with the frequency of 1MHz. These new devices adopt to accord with RoHS standard and have unleaded combined structure of 100 of the protective cover to capsulate, it is extremely low-level that this encapsulated structure can drop the buzz noise to, the operating temperature rage specification of the new device is ‑ 55 degrees of C- +125 degrees of C, and resist thermal shock, dampproof characteristic against mechanical shock and anti-vibration.
At present, the samples and batch productino batch of these two new inductors have already been offered. Its lead time of batch productino is 8- 10 weeks.













