Discover Top Posts Tagged with #k518ise

Lonsdor K518S/K518ISE Great Sale: Lifetime Free Update Online, No Annual Fee!

Good news!!! Lonsdor Tech made an important announcement for K518S/K518ISE customers: Lifetime Free Update Online. No Annual Fee!

Who can enjoy this benefit?

1.For the customers who have already purchased K518S or K518ISE but not registered before Nov.10th, 2023;

2.For the customers who purchase Lonsdor K518ISE/K518S key programmer on Nov.10th, 2023 or later without registration.

How to update to use for a lifetime?

As long as the customer meets the above conditions, the Lonsdor factory will automatically open all software packages including Toyota AKL Activation/ JLR License/ Nissan License/Volvo License, etc.

No need to provide the device serial number! Use forever! Lifetime Free Update Online! No Annual Fee!

#K518ISE #lonsdor k518s

Lonsdor K518ise Latest Review 2018.12.05

Lonsdor K518ISE Latest Review, Have a check:

programmed key ok.

Corsa E (2016) read PIN (BCM) = OK

VW Amarok 2016 add key ok and backup eeprom

FIAT 500 2008 Read Pin code and preapre remtote key than program. ALL FINE

I have start loving this toy when i bought it was working 20% ok 80% not Now it is 95 – 5. Today megane 3 year 2009 keyless key made job in 2minutes

Porche Panamera 2010 km adjust obd job done

hyunday i20 2015 year read pin ok add key ok

Citro?n c5 2008 read pin add key ok 307 Kline read pin fail / add key ok

206 kline all key lost read pin ok about 3sec opel Zafira b read pin add key Touran 2006 learn key and remote ok

Zafira B, read pin and add key, – Success (note, this failed under Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)

Peugeot 607 2006 abrites won’t connect with BSI to read pin and key learning too . Lonsdor read pin and program key 2 min .

Renault Fluence 2015 keyless go works excelent,in fact,zed full asks for pin and Lonsdor doesn’t.The key works ok in central module and keyless go,5 min job.

Suzuki Swift 2015-> (pcf7961) all key lost Program without pin – OK (2min)

ford focus 2006 year add key (all key lost) work all ok

#Lonsdor K518ise #K518ISE #Lonsdor K518 #Lonsdor K518ISE Key Programmer

Lonsdor K518 Test on BMW FEM/BDC Platform

This is a Lonsdor K518ISE Key Programmer test on BMW FEM/BDC platform,it test by k518 engineers.

Here is another article about K518 on BMW FEM/BDC:

Key Programmer Lonsdor K518ISE program BMW FEM BDC key even all key lost

Procedures:

Connect K518 to BMW FEM/BDC platform by OBD port.

Select “Immobilization”–> “BMW”–> “Select from type”–> “FEM/BDC”

Select “Read key info”

It will show the vehicle information include:VIN,SWFL,BTLD,CAFD/Type/Current key position and mileage

Click “OK” to continue

It show with below massage

Click “OK” to continue

Select “Make dealer key”

Please choose a blank location to generate a new key!

Choose location 3 and click “OK” to continue

Select “Use a working car key to generate a dealer key”

Then click “OK” to continue

Prepare a working car key,put the key into the car induction coil and press [OK] to continue.

Turn ignition on

Click “OK” to continue

Show below information

Put the new key in the car induction coil

Click “OK” to continue

Detecting new key

Learning key,please keep the key stable…

Learn key complete

New key have been added into location 3

Done!

#Lonsdor K518ISE Key Programmer #K518ISE key programmer #Lonsdor K518ISE #K518ISE

Lonsdor K518ISE Odometer Correction Car List

K518ISE Key Programmer Car List of Odometer Correction:

VW, PORSCHE, FORD, JAGUAR, LAND ROVER, MAZDA, AUDI, RENAULT, HUMMER, HYUNDAI, KIA

VW:

IMMO 4, Phaeton, IMMO2 & IMMO3

IMMO4: NEC 24C32, NEC 95320, 2013 NEC 24C64, NEC 24C64, 2015 NEC+24C64 color screen, 9S12XHZS12, CC+24C32, 2012 24C64 color screen

Prosche:

Cayenne 2010-, panamera 2010-, 918 2015

Ford:

Max 2010-, S-Max 2008-2010, New Mondeo, Ecosport, Kuga color monochrome, Mondeo 2011-/2008-/2008-2010, Fiesta 2013-/2008-2012, Focus 2004-2008/2012-/2009-2011, Explorer 2011-2015, Mondeo CHIA-X 2011-2013

Jaguar:

Xj, f-type, xe 2015-

Land rover:

Evoque 2011-, range rover 2010-, discovery 4, freelander2

Mazda:

Axela, M6 (Atenza), CX-5, CX-9, M2, M3, M5, M6, New M6

Audi: A6L -2009

Renault: type1

Hummer: h2 2007-

HYUNDAI:

Accent 2006-, GETZ 24C16, I20 24C16,IX25 24C16, Verna (RBC) 24C16, VELOSTER 24C16, Azera D70F3423, HB20 DF70F3423, Mistra, D70F3536, SONATA9 D70F3536, New Tucson 2016, Elantra (AD) D70F3536

Kia:

K5 24C16 D70F3423 D70F3536, Ceed 24C16 D70F3423, Magentia (Optima) 24C16, Rio 24C16 2015, Sorento 2007-, Soul 24C16, Sportage 2008-, Sportage (Sportage R) 24C16 D70F3423 D70F3536, K4 D70F3536, KX5 D70F3536

Reference:

K518ISE Car List of Key Programming

Europe: Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG, Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart, Borgward

America: Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia: Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki, Toyota, Shigaoka Queen

China: Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car models are included)

CnAutotool.com Lonsdor K518ISE Highlight:

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming. Toyota/Lexus: smart key all key lost – via OBD ( without dismantle) BMW CAS3/CAS3+/CAS3++: direct OBD programming BMW CAS4/CAS4+: dismantle & read data programming 2016 -New Maserati: smart key programming 2016 -New Ford: smart key programming Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included. Renault ( Megane, Koleos, Scenic) without PIN code key programming VAG group 4th & 5th immobilizer system Ferrari (458, F12, F149): direct OBD programming Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

Lonsdor K518ISE car programmer User Manual:

http://forobd2tool.com/wp-content/download/Lonsdor%20K518ISE/k518ise-user-manual.pdf

http://auto-detection-tools.cuisine-spirit.com/lonsdor-k518ise-program-volvo-s40-smart-key-297805.html

#Lonsdor K518ISE #K518ISE #K518ISE car programmer

Lonsdor K518ISE program Volvo S40 smart key

Lonsdor K518ISE Key Programmer Program Volvo S40 common and smart key use manual:

1. Add key

Common key: add one piece

Smart key: Add one piece

2. Delete key

Key: delete the programmed key. Before deleting the key, please firstly select “Identify key ID” and record the ID info, during this process “The selected key ID will be deleted”.

Smart key: Delete all smart keys. If the key available is deleted, you could program it again.

3. Identify key ID

Key: the ID of key available can be identified, please record data.

4. Key unlock:

Key: Lonsdor K518ISE can detect and identify if the key is locked or not, if locked, K518ISE will unlock it. Note: K518ISE can unlock the key to the original car or the key with CEM security data.

Smart key: Lonsdor K518ISE can detect and identify if the key is locked, if yes it will unlock it. Note: only unlock the key of your car or corresponding cars’ key with CEM safe data.

As for “How to indentify smart and semi-smart key”, go for the last part.

1). Please dismantle the CEM (located in front of the passenger seat and the back of the storage box). There are 2 kinds of boxes, and the wiring is different, please follow the below diagram to wire and use K518ISE to read out 2 copies of data from left to right.

The wiring diagram of style-A box

The wiring diagram of style-B box ( double 1L15Y wiring diagram, the wiring position on the left is the same as that on the right)

2) After you read out the data, please provide your seller/ engineer with the 2 copies of data and K518ISE serial number, then wait for them to transfer it into special data. After you obtain the data, plug Obd2 Key Programmer K518ISE to the computer and put the special data into the “customfile” folder for programming.

3) Add key on Volvo S40

Key: to add key, please input the new key’s remote ID and remote code (choose 16bit/24bit).

Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

Smart key: just follow the instruction.

Key:

1) delete the key: before deleting the key, please firstly choose “Identify key ID” and record the ID info. During this process, “The selected key ID will be deleted”.

2) Please be sure to keep the new key box where printed the remote info that you will need to enter when adding key.

3) If the car has no KVM box (under the driver seat) it has a normal key, not remote.

4) During the key programming, you need to enter the remote ID and remote code (select 16 digits or 24digits).

Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

L-RFK style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

Smart key:

1) Unlock: only unlock the key that K518ISE from www.cnautotool.com is working with or the key with CEM security data.

2) Delete the key that is programmed, after that the original key could be programmed again in the same car but if unlocked it won’t be used on another car.

3) S40 smart key programming needs no dismantling and reading KVM.

How to identify smart key and semi-smart key?

1) Smart key: comes with a coil, marked with “PK” on the packaging and no remote code (see the left picture below)

2) Semi-smart key: No coil, marked with “RFK” on the packaging and has remote code of 16 / 24 digits (see the right picture below)

How to identify if the car has smart key or semi-smart key?

1) If you can find a KVM box under the driver’s seat, it is a smart key, otherwise, it is semi-smart key.

2) The key handle is a plastic model key while the semi-smart key doesn’t have that.

Chip: 48 chip

Remote style: normal remote frequency: 433MHz; smart remote frequency: 433MHz

Key fob: Dedicated small key No. 24/38

Password requirement: dismantle and read CEM, backup security data, then program.

Remote generation:

Normal key: during key programming, you need to enter the remote ID and remote code, after the key is programmed successfully, then remote is generated.

Smart key: after the remote card is programmed successfully, the remote will be generated automatically.

OBD position: on the bottom left of steering wheel.

Other information

1) car model

2) Key:

during the key programming, you need to input the remote ID and remote code (16 digits or 24digits).

There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

L-RFK style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

3) CEM box position (shown as below)

4) Smart key:

You are advised to refer to the original key to select the new key. For example, the L-PK-434 key below is a remote key, which doesn’t have remote code of 16/24 digits.

http://cnobd2tool.inube.com/blog/7697787/lonsdor-k518ise-program-volvo-s40-smart-key/

#Lonsdor K518ISE Key Programmer #lonsdor k518ise #K518ISE Key Programmer #K518ISE #Key Programming tool #Best Programming tool #car key programmer

Lonsdor K518 K518ISE Car Key Programmer FAQ

FAQ Lonsdor K518 key programmer hardware, adapter, car list, function, update etc, keep updating… Q: Does Lonsdor key programmer support Spanish? A: No, Lonsdor K518 is the Chinese version. K518 supports English (K518ISE) and Thai (K518THA) language. One machine one language, cannot exchange within the machine. Q: Does lonsodr k518ise key programmer need tokens? A: No, it does not need token.…

View On WordPress

#K518ISE #Lonsdor K518 #Lonsdor K518ISE key programmer

Newest Lonsdor K518ISE Key Programmer with Odometer Adjustment for All Makes

http://www.autonumen.com/goods-6709-Pre-Order+Lonsdor+K518ISE+Key+Programmer+with+Odometer+Correction+Function.html

K518ISE key programmer is the latest version of Lonsdor, with wider vehicle coverage in key programming, it is customized as the first masterpiece to the overseas market from Lonsdor. With months of preparation and rigorous testing, from the software design to the user experience, it is an epitomize of Lonsdor years of industry experience. It is tailored and perfect for vehicle locksmith, to help making their work easier, faster and more powerful! With flat ergonomic design,user can experience more humanized functions.

#Lonsdor K518ISE Key Programmer #Lonsdor K518ISE #K518ISE

Lonsdor K518ISE Key Programmer Plus SKE-LT Smart Key Emulator

http://www.cnautotool.com/goods-6636-Lonsdor+K518ISE+Key+Programmer+Plus+SKE-LT+Smart+Key+Emulator+.html

The Top 4 Reasons to Choose Lonsdor K518ISE Key Programmer: 1.Supported language: English 2.Update: One key update online 3.Support car types: http://en.lonsdor.com/html/function 4.With Free BMW FEM key programming function

#Lonsdor K518ISE Key Programmer #Lonsdor K518ISE #K518ISE Key Programmer #K518ISE

Lonsdor K518ISE program Volvo S40 smart key

Lonsdor K518ISE Key Programmer Program Volvo S40 common and smart key use manual:

1. Add key

Common key: add one piece

Smart key: Add one piece

2. Delete key

Key: delete the programmed key. Before deleting the key, please firstly select “Identify key ID” and record the ID info, during this process “The selected key ID will be deleted”.

Smart key: Delete all smart keys. If the key available is deleted, you could program it again.

3. Identify key ID

Key: the ID of key available can be identified, please record data.

4. Key unlock:

Key: Lonsdor K518ISE can detect and identify if the key is locked or not, if locked, K518ISE will unlock it. Note: K518ISE can unlock the key to the original car or the key with CEM security data.

Smart key: Lonsdor K518ISE can detect and identify if the key is locked, if yes it will unlock it. Note: only unlock the key of your car or corresponding cars’ key with CEM safe data.

As for “How to indentify smart and semi-smart key”, go for the last part.

The wiring diagram of style-A box

The wiring diagram of style-B box ( double 1L15Y wiring diagram, the wiring position on the left is the same as that on the right)

3) Add key on Volvo S40

Key: to add key, please input the new key’s remote ID and remote code (choose 16bit/24bit).

Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

Smart key: just follow the instruction.

Key:

1) delete the key: before deleting the key, please firstly choose “Identify key ID” and record the ID info. During this process, “The selected key ID will be deleted”.

2) Please be sure to keep the new key box where printed the remote info that you will need to enter when adding key.

3) If the car has no KVM box (under the driver seat) it has a normal key, not remote.

4) During the key programming, you need to enter the remote ID and remote code (select 16 digits or 24digits).

Note: There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

L-RFK style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

Smart key:

1) Unlock: only unlock the key that K518ISE from www.cnautotool.com is working with or the key with CEM security data.

2) Delete the key that is programmed, after that the original key could be programmed again in the same car but if unlocked it won’t be used on another car.

3) S40 smart key programming needs no dismantling and reading KVM.

How to identify smart key and semi-smart key?

1) Smart key: comes with a coil, marked with “PK” on the packaging and no remote code (see the left picture below)

2) Semi-smart key: No coil, marked with “RFK” on the packaging and has remote code of 16 / 24 digits (see the right picture below)

How to identify if the car has smart key or semi-smart key?

1) If you can find a KVM box under the driver’s seat, it is a smart key, otherwise, it is semi-smart key.

2) The key handle is a plastic model key while the semi-smart key doesn’t have that.

Chip: 48 chip

Remote style: normal remote frequency: 433MHz; smart remote frequency: 433MHz

Key fob: Dedicated small key No. 24/38

Password requirement: dismantle and read CEM, backup security data, then program.

Remote generation:

Normal key: during key programming, you need to enter the remote ID and remote code, after the key is programmed successfully, then remote is generated.

Smart key: after the remote card is programmed successfully, the remote will be generated automatically.

OBD position: on the bottom left of steering wheel.

Other information

1) car model

2) Key:

during the key programming, you need to input the remote ID and remote code (16 digits or 24digits).

There are 2 types of key (P/L), please confirm the new key’ style and packaging are the 100% same as that of the old key.

P style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

L-RFK style:

The remote ID is 8 digits (No. 1 shown as below)

The remote code is 16 digits (NO.2 shown as below)

3) CEM box position (shown as below)

4) Smart key:

You are advised to refer to the original key to select the new key. For example, the L-PK-434 key below is a remote key, which doesn’t have remote code of 16/24 digits.

http://cnobd2tool.inube.com/blog/7697787/lonsdor-k518ise-program-volvo-s40-smart-key/

#Lonsdor K518ISE Key Programmer #lonsdor k518ise #K518ISE Key Programmer #K518ISE #Key Programming tool #Best Programming tool #car key programmer

#k518ise

Trending Tags

Recently Viewed Tags

#k518ise