lighting high mast installation procedure
If the high mast is installed with attention to detail, it will provide reliable service and long-term use. The following is a guide to help you install and maintain your high lighting mast.
Excavate the foundation pit.
Excavate the foundation pit. The foundation pit should be at least twice as deep as the mast, and it should be filled with concrete that is compacted. If you have trouble getting your concrete to be dense enough, add more water to help make it more liquidy before pouring it into the foundation pit.
Dig the base of the foundation.
Dig the foundation pit.
Dig the base of the foundation to a depth of 4 meters (13 feet).
Dig a hole for the foundation that is 1 meter (3 feet) in diameter and 1.5 meters (4 feet) deep, filled with concrete or cement-based mix.
Installing the steel structure of the mast.
The installation of the steel structure of the lighting mast is an important step in high-mast lighting installation. The accessories that are installed on the steel structure include:
Lighting fixtures
Electrical wiring and connections to main power supply
Waterproofing layers, cable ducts, fiber optic cables for data networking and security cameras
In addition to these accessories, you will also need access to your project site so that you can perform tests on different types of lenses and other accessories before installation begins.
Install the mast foundation.
For a high mast installation to be successful, you must ensure that the foundation is installed in a way that it is not subjected to excessive stress, load or pressure. For example, if you are installing your mast on a concrete slab and it is directly exposed to sunlight for long periods of time, then this could lead to cracking of the concrete slab. This will cause cracks in the mast as well and ultimately make your high mast installation unsuccessful. Therefore when installing your foundation for high masts, make sure that you place them in areas where they can remain cool during summer months and shade during winter months so as not to get affected by excessive heat or coldness.
Great attention should be paid to every detail during installation on site to ensure the safety and stability of each step of installation.
When installing a high lighting mast, great attention should be paid to every detail during installation on site to ensure the safety and stability of each step of installation.
Before starting the construction process, it is necessary to make sure that you have all of the equipment necessary for this project. You should also make sure that you have all of the materials needed for this project at hand and ready for use. Make sure that you understand how much work is involved in this type of installation before starting so that you are prepared for anything that may come up along the way.
Specific guidelines must be followed when constructing a high mast structure as outlined by manufacturers' instructions which can be found online or downloaded from their websites if needed
Conclusion
This is a brief introduction to the installation of high lighting masts. For more detailed information, please refer to our company's product catalog or contact your local sales representative for more information.