16 Types of Heavy Equipment Used in Weldstar Construction
Heavy duty construction equipment is critical for any big job. Weldstar Construction utilizes a variety of heavy equipment to complete our projects. We've put together a list of all the types of heavy machinery we use and how they're used in the construction industry.
A trencher is a machine used for cutting into the earth and laying pipe. It's a very useful piece of equipment when you're working on an industrial project, but it can also be very dangerous if you don't know what you're doing.
A Weldstar trencher is basically an excavator with a bucket attached to it. When this bucket digs into the dirt, it creates trenches that are perfect for laying down pipes or wires. This allows contractors to move quickly and efficiently through their work site without having to worry about digging deep enough holes themselves! The main difference between a trencher and other types of heavy equipment is how they operate: while most vehicles have tracks that make them go forward when in motion (like tractors), others like bulldozers don't have any way of moving across surfaces except by pushing themselves forward with their front wheels until they get where they want to go—and then pushing back again once they've finished whatever job needs done next! If something gets stuck in between these two modes--like say maybe some rocks or roots underneath your wheels--then there could be trouble ahead; especially since these types tend not always turn well either."
Excavators are heavy equipment used to dig trenches, dig foundations and move dirt. These Weldstar machines have a bucket that is lowered over the ground and can be used to pick up dirt or rocks. They also have a boom (a telescoping arm) that can reach out and grab trees or concrete blocks. Through the use of hydraulics, excavators can pick up large amounts of material at once; however, they are not always the best option since they can only remove one layer of soil at a time with each pass.
Bulldozers are used for moving earth and other material. The blade is used to push the material, which can be moved in all directions. Bulldozers are used in construction, mining and agriculture. They have a cab that protects the operator from being hit by flying objects while they are working on a project.
A wheel loader is a machine used to load and unload construction materials, such as dirt, gravel and sand. They can also be used to move other equipment and heavy machinery. Wheel loaders are the perfect tool for any job that requires moving large amounts of material in a short period of time.
Weldstar Wheel loaders use hydraulics to manipulate their front bucket or blade, which allows them to pick up materials placed in front of them by operators or dump trucks. This makes wheel loaders very useful in many different industries including mining operations where they're used to transport large amounts of coal from mining sites back over long distances onto conveyor belts leading into crushers or processing plants where it will eventually turn into briquettes or hot ash depending on what type of fuel was burned during production (coal vs gas).
They're also commonly used by surveyors who need access through forests or around lakes when conducting surveys for roads being built near existing communities' homes & businesses; engineers working on highway projects like widening traffic lanes because people drive faster than ever before; farmers who need help packing soil down firmly so seeds will germinate properly once planted (soil compaction); landscapers building retaining walls; construction contractors building new buildings either commercial offices/retail stores etc..
You've probably seen a grader in action at some point, whether it was on the job or driving around town. So what is a grader? It's a piece of heavy equipment that's used to level land and smooth out surfaces. The most basic models are able to move dirt, gravel, and other materials; however, there are also more sophisticated models that have attachments such as plows, snow blowers, and scrapers (which are used for clearing debris from your driveway).
Grader operators must be aware of their surroundings at all times because they can seriously injure other people if they're not careful with how they operate their equipment. Graders can cost anywhere between $10k-$100k depending on what type you need for your job site; however make sure to check with your insurance company before buying one so you know exactly how much coverage will be needed for repairs/maintenance costs after purchasing one!
Skid steers are a versatile piece of heavy equipment that are used in a variety of industries. They are easy to operate, maintain and transport. A Skid steer is usually a small vehicle with an arm or boom that allows the operator to perform tasks such as grading or digging. It is also responsible for loading material onto trucks or trailers using bucket attachments.
Backhoe loaders are often used for digging and loading earth, sand, gravel and other materials. They can also be used to move materials and equipment around construction sites.
Backhoe loaders are widely used in the construction industry as well as in mining, agriculture, landscaping and forestry. They can even be found in the home!
The motor grader is a great tool for leveling a road or runway. This equipment can also be used to create temporary roads and airstrips. The motor grader’s blade is equipped with teeth that can dig into the dirt, gravel or sand beneath them and move it around on top of the ground.
Motor graders are often used in construction projects because they help flatten surfaces, which makes them more suitable for vehicles travelling on them. They are also very useful when removing snow from roads or runways; this is usually done by dragging a large metal blade across the surface of whatever needs clearing off (such as asphalt). By dragging heavy equipment over frozen ground by hand would take much longer than using an ATV equipped with chains attached to its tires - making it easier to handle difficult terrain in all weather conditions!
Pile drivers are used to drive piles into the ground for construction and mining. They are usually powered by diesel or electricity, though steam was once used as well. Pile drivers can be used to drive steel or wood piles.
Dump trucks are a type of heavy equipment that is used for hauling, moving and dumping materials. They can be used for towing, loading and unloading, moving dirt or other landscaping material, clearing snow from roads and building sites. The dump bodies on these models are usually made from steel or aluminum and have a hydraulic cylinder inside them that allows the operator to lift or lower the bed as needed.
Some dump trucks also include an auger attachment that lets you move material through an opening at the back end of the truck bed so it doesn't need to be dumped out all at once. This feature can help you get rid of just about anything—from snow removal to construction debris like concrete chunks or asphalt shingles—without having to stop your work each time you need a new load removed from your site.
Portable Concrete Mixers are used to mix concrete. These machines can be mounted on trucks or trailers and do not require a foundation or base of their own. They are mostly used for commercial and residential construction, but some contractors will use them for large-scale jobs.
Concrete is mixed in a wheeled drum that rotates inside the machine and has paddles that scrape against the rotating drum to break up any lumps in the mix before it is poured into forms, where it sets up as hard as stone after just two hours! If you've ever heard someone say they're going out to "mix up some concrete," they're probably referring to using this heavy equipment!
Cold planers and milling machines
Cold planers and milling machines are used for leveling and smoothing surfaces. They use a rotating blade to remove material, which makes them ideal for milling, planing, or shaving concrete, asphalt, brick and stone. These tools can also be used on wood and flat surfaces.
Millers usually have a single-sided rotating table with two cutting blades that move in opposite directions. This allows the operator to work in both directions on flat surfaces or hillsides as needed—even if there’s no room to turn around!
Pipelayers and line-laying equipment
Pipelayers and line-laying equipment are used to lay pipes and cable in the construction of pipelines, electrical lines, and telephone lines.
Pipelayers are also known as pipe jacking machines. They are used to insert or remove a pipe into an existing pipeline without interrupting the flow of water through it. Line-laying equipment is used for laying cables on poles or underground cables in trenches with the help of a trenchless boring machine that drills through soil without making any surface damage
Scrapers, self-propelled or towed models
Scrapers are used for removing snow and ice, grading dirt, sand and gravel, removing dirt, rock and debris from a road. They can also be used to level the surface of a road that has been built up by traffic. Scrapers come in self-propelled or towed models.
Cranes, mobile and tower cranes, lattice boom models, and truck cranes.
Cranes are the heavy equipment used to lift large objects, such as building materials, road barriers, and electrical towers. Cranes can either be mobile or tower cranes. Mobile cranes are self-propelled machines that carry an operator cab on their own chassis and include a hook for lifting objects or pulling cables. Tower cranes have a tall mast which moves along the horizontal plane using hydraulics or winches mounted inside its body. The boom of a crane is lifted by two hinged jibs that move up and down in tandem with each other at opposite ends of the boom. Lattice booms hold more weight than rigid booms but require more maintenance because they are made up of many smaller pieces that can break over time due to stress caused by wind loads while working outdoors during construction projects like Weldstar which use these types of heavy equipment regularly throughout all stages including demolition, removal of hazardous materials such as asbestos insulation where dust particles must be contained properly before entering into surrounding areas not only protecting employees but also those living nearby who may suffer adverse health effects later on due to inhalation exposure such as lung cancer from inhaling asbestos fibers into their bodies (CDC).
Truck cranes come in various sizes depending on use needs but generally only have one jib arm attached directly onto trailer beds mounted underneath trucks with hydraulic cylinders lifting them upwards when needed; however some models do allow operators access via side stairs located underneath cab doors so if extra assistance is needed then someone else will need assistance from getting out first before exiting vehicle safely without falling off ladder when opening door quickly without thinking about possible danger involved if
Heavy duty construction equipment is critical for any big job.
Heavy duty construction equipment is critical for any big job. Heavy construction equipment is used in many industries, including mining and construction. Heavy duty construction equipment can be used to move and lift heavy loads.
Heavy equipment is a large part of any construction project. It’s crucial to have the right kind of equipment to get the job done right, which means that your team needs to know what they are doing when it comes time for buying or renting these Weldstar machines. The good news is that there are plenty of companies out there who can help you find exactly what you need in order to succeed with your next big project.
