#lubricantviscosity

[digitalmosil]

Significance of viscosity index in lubricants

Viscosity Index (VI) is defined as the rate of change of viscosity with respect to temperature. This means viscosity is also influenced by temperature.

[digitalmosil]

Significance of viscosity index in lubricants

Technical Concept: Viscosity Index

To begin with, it is important to select the right lubricant in order to protect your machinery. This depends largely on the viscosity index of the fluid.

So, let’s learn more about Viscosity Index & its significance.

What is Viscosity?

Prior to understanding the viscosity index, we need to comprehend the physical property of fluids called “Viscosity”.

Here the question arises, What is Viscosity? Generally, Viscosity is the most important property for the lubricant and it can be defined as an oil’s resistance to flow and shear.

Taking a proactive approach to monitoring your lubricant’s viscosity can have a major effect on the health, and life of your machinery.

What is the Viscosity index, and how does it relate to Viscosity?

Viscosity Index (VI) is defined as the rate of change of viscosity with respect to temperature. This means viscosity is also influenced by temperature.

Particularly, the quality and formulation of a lubricant will impact how much its viscosity will drop with an increase in temperature.

So, it is important to study the VI to anticipate whether the lubricant being referred to, meets the asset’s requirements based on the operating temperature range.

Determination of the Viscosity Index

Generally, there are two standard procedures to calculate the viscosity index: ASTM D22706 and ISO 29097. The viscosity is measured at two temperatures i.e. 40 degrees C and 100 degrees C to determine an oil’s VI. This is then compared to a scale based on two reference oils.

The viscosity index of conventional mineral oil is well known and is between 95 to 100 because the VI has no units of measure.

The VI of highly refined mineral oils is approximately 120.

Whereas, the synthetics may have a VI of nearly 250.

Here, the higher number indicates that the lubricant changes its viscosity at a lower rate based on the temperature.

A higher VI is more captivating on the grounds, as a result, it enables the lubricant to provide a more stable lubricating film over a wider temperature range.

Remember, a slight difference in temperature can result in a huge viscosity change that could be unfavorable to the asset!

Viscosity-Temperature behavior

Lubricants change their viscosity significantly with changing temperature. But this viscosity change, over the temperature, is not linear.

With a changing temperature, a low VI represents a major change in the viscosity of a lubricant. Such lubricants are highly viscous at low temperatures and thin at high temperatures.

It is completely the opposite in the case of high VI. Here, there is a small change of viscosity over a wide temperature range.

Conclusion:

Viscosity index is the most important parameter in demonstrating the lubricant’s temperature-related flow properties. There are plenty of Industrial Lubricants options in the market, but it is always a good idea to check the specifications of the lubricant manufacturer to give a proper lubricant solution.