#mso64b

[biophysicslab]

MATLAB Script for Tektronix Scope Plot and Measure

I present an updated script that follows current best practices using the MATLAB Instrument Control Tool Box. To start with, there is no NI-VISA. Instead, the code is based on the TCP client object instantiation. For this test setup I use a single event trigger to capture the SPI data out pin on a BME680 multifunction sensor controlled by an Arduino UNO R3. Test Setup for MATLAB Plot and…

MATLAB Script for Tektronix Scope Plot and Measure

[biophysicslab]

Analyse Arduino Uno Bootloader with MSO64B

I created a photo montage below showing how to use a mixed signal oscilloscope as a logic analyzer.  First, I establish a UART bus by connecting the analog probes to the Rx/Tx pins on the Uno board. This setup allows me to monitor the data transfer between the board and the IDE.  Then, I use the scope’s “data rate” measure option to find the boot loader baud rate 115,200.  Alternatively the…

Analyse Arduino Uno Bootloader with MSO64B