How to alter the mechanical phase of the NC feed machine?
When the NC feed computing device is used with a punch, after the mildew is changed, in addition to the easy parameter settings such as the length, frequency, and velocity of the NC feed desktop contact screen, It is additionally critical to alter a sequence of mechanical components in accordance with the peak of the genuine mold, the width of the material, and the traits of the process. These consist of adjustment of feed line height, adjustment of equipment wheel width, adjustment of strain spring compaction, adjustment of feed thickness, adjustment of feed attitude, and adjustment of rest angle.
1. NC feed desktop tools wheel width adjustment. The width of the baffle wheel has to be adjusted in accordance with the width of the authentic material so that the baffle wheel actually performs the position of the baffle limit. The adjustment steps are as follows: First, loosen the equipment wheel lifting cope with screw, so that the tools wheel can go left and proper via the handle, then loosen up the NC feed computing device drum, put the cloth between the two end rollers of the assisting body into the feed machine. After passing through, let the fabric head enter the mold. Finally, the use of the lifting handle, the baffle wheel is moved to the left and proper aspects of the material, leaving a hole of about 0.2 mm, and then locking the screw(not to depart the hole completely, it need to be handy to use the hand-pumping fabric after blocking).
2.NC feeder press spring compression power adjustment. For extraordinary substances thickness of the plate, the strain of the strain spring wishes to be adjusted so that the cloth in the feeding computer for the duration of the method of skid. The adjustment screw is placed under the equipment wheel of the NC feed machine. The inside hexagonal wrench knob can be used. Note that the compression pressure ought to be moderate, no longer too giant or too small, too giant and very pressed material, and too small.
3. NC feed desktop feed attitude adjustment. Different modes have exceptional stamping processes, and the feed attitude is the time when the feed computer starts offevolved feeding and the time when the feed ends. It is carried out by way of adjusting the cam of the punch bed. After adjustment, it is vital to begin feeding when the mold on the punching mattress is absolutely separated from the decrease mold, and cease feeding earlier than the top mold and the decrease mildew are closed.
4.NC feed laptop rest perspective adjustment. The mechanical NC is to loosen up with the mold processing process. When the mildew information needle is inserted into the material, it is opened to relax. When the mildew information needle leaves the material, it stops relaxing. By adjusting the size of the loosening screw of the loosening bracket constant to the punch slide through the feeder, when the loosening screw touches the pilot launch lever, it can be loose.
