Discover Top Posts Tagged with #objectified cosplay

Ignore the background lmao

But here’s a wip on the citrus mask I’m wearing at the tour! ^^

I’m hoping to get this part done by like Friday or smth lmaoo

#art #cosplay #WIP #mask #citrus #objectified comic fanart #objectified fanart #objectified citrus #objectified cosplay #cosplay wip

how I made my razor cosplay kinda tutorial

Im not great at explaining things erm so bear with me

Feel free to ask any questions ill answer to the best of my abilities

I didnt include it but you technically need a ruler too and paintbrushes and markers for patterning oops

here's the steps on how i made my razor head

Make the pattern for a box using paper. The dimensions of the panels depend on how you are going to overlay the pieces, so you may need to add/ remove 10 mm from certain sides (for instance, the top and front panels of my head are actually slightly different because of how i glued it together). The back panel is made of strips instead of being 1 big piece because of the holes. The total dimensions of my head are roughly 34cm x 23cm x 23cm

Cut out the pieces from 10 mm eva foam and heat seal using a heat gun. Ill link a video for this.. also use a craft knife for this, not scissors 10 mm is too thick and the knife gets a better cut anyway

Glue pieces together using contact cement. Ill also link a video on how to use contact cement since i cant really explain it. Please wear a respirator or do it outside because the fumes are toxic!!!!! Also dont use hot glue. Won't work.

Make the little face rim thing using 5mm eva foam strips and glue them on

Cut out where the "blade" will be at your eye level so you can see

6. This kinda depends on how you want it but I added thin strips of the 5mm eva foam on both sides of the cutout hole for the mesh of the "blade" to sit on so it wouldn't be flat.

7. Wait a couple hours after you glued the pieces together, then seal gaps between pieces using foam clay. This is optional but it looks a bit better.. ill link a video

8. Wait like 24 hr for the foam clay to dry and harden then sand it down

9. Add mouth magnets if desired for changeable expressions, then cover thinly with foam clay, and once it dries sand it flat. I carved out a little hole for them to sit in then used superglue. If you dont want that then lowk just paint the mouth on

10. Seal the foam with whatever sealer you want i used modge podge matte

11. Paint the head

12. Cut out and paint your mesh for the "blade"

13. Seal the head and mesh using some kinda sealer... i used modge podge again for the head and a clear coat spray for the mesh

14. Glue the mesh onto the front for the blade and back for those hole things. I just used hot glue for this cuz it was easier

the back with mesh holes

15. Make magnet eyes and mouth if you want... the way the eyes sit on mine is just loose magnets sitting inside the mesh and eyes with the magnets glued in if that makes sense

16. now you have to make it wearble this part is lowk kinda hard.. I made an eva foam helmet and glued it inside using a pattern from mellowmind cosplay on Etsy

but that isn't the only way. ... You could also probably use those helmets that kig fursuits use but I dont really know anything about that..

I glued in padding with upholstery foam on the forehead and sides so it wouldn't be hitting my nose. Its not the most comfortable thing in the world but it works so long as you add enough padding for your head not to slide around.

I also added 2 small side panels on the bottom so it wouldnt be entirely open..

As for the paws... obviously this has its own set of materials and everything so lowk id reccoment just searching up how to do them

I used bigz short shag denim and howl fabrics white teddy faux fur and black mochi minky i got from hobby lobby

The stuffing for the pads and claws just came from a plush 💀

If you dont know anything about fursuit making then o reccomend watching videos on paws because they are kinda hard to do. Especially if you cant use a machine..

I used a pattern from freakhound studios it is free and awesome

https://freakhoundstudios.com/free-paws-canine

I didnt proof read this sorry if it sucks lol

Eva foam vids:

Basic stuff: https://youtu.be/-WUi1VhVFdo?si=O__qCJGXNBEuL5-G

How to use contact cement : https://youtu.be/iPHEUvkJPGE?si=3WuWjct69LGmTSQA

Foam clay: https://youtube.com/shorts/HOXFE3PJSss?si=PKKLHPVgXt10ueSG

Sealing foam https://youtu.be/ug6Rs06FEpk?si=l0rom-DJkKfI11zf

I forgot to say also the neck is literally just a ring of 5mm eva foam made seperatly that I just slip on over my head

Tag me if you use this i wanna see

#objectified comic #objectified oc #objectified #cosplay #Objectified cosplay

WAGYU COSTUME!!!!

#objectified comic #objectified wagyu #halloween 2025 #cosplay #objectified cosplay #happy halloween guys!!!!

@objectifiedcomic LOOK @citrusmpreg @citrusplush

#objectified #objectified comic #object shows #objectified spool #objectified cosplay #cosplay

DRAGONSCALE COSPLAY UPDATE!!!

Ive finished the horns and the wig!!! I added alot of hearts cause it looks cute and might make some clips for the wig too :3

#objectified comic #objectified cosplay #dragonscale objectified #object shows

yall guess who imma be for halloweeeennnnn >:3

my dad is gonna help me make the moving wings, and i already have everything else besides the mesh and the metal or plastic or whatever to make the wings.

and if im ever bored or have some extra time i might try and make the way wagyus arm was in this panel >:3

#objectified comic #objectified cosplay #objectified wagyu #halloween costumes #object shows

DRAGONSCALE COSPLAY!!!!!

Is basically finished except for the wings

#objectified comic #objectified cosplay #dragonscale objectified