#pendant switch

[digitalanand2]

What is crane pendant switch and how does it work?

Crane pendant switch:

For lifting and lowering heavy objects a crane is used. The cranes are mostly used for industrial purposes. To move and manage the overhead crane a crane pendant is used. It is a part of the overhead crane used for the hoist. And it is the important part of the crane called a crane control unit or crane pendant station. 

If any mistakes or bugs are found in the crane control unit then the crane inspector checks it first. The crane pendant switch has a wired connection that is connected to the hoist. And the cable wire is suspended from the hoist and swings like a pendant. The long cable wire is called a crane pendant cable.

The crane pendant push button, can move the crane in long travel, cross travel, and for a hoist.

 Working procedure of crane pendant push button switch:

The pendant push button fully worked on the wired connection and they don't need a charging system or battery replacement service. It takes the same electric energy as the overhead crane gets. There are many push buttons present on the crane pendant and each button has different command.

The crane pendant has interlocked feature in pair of buttons. This means that two parallel buttons cannot be pressed at the same time. If a down button is pressed at that time up button cannot be used until it reaches the down destination. The pendant push button control have buttons like forward, backward, up, down, start, stop, left, and right.

To manage the overhead crane or hoist two operators are needed sometimes. The first operator monitors the movement and follows the signal by sitting in the cabin of the overhead crane. And the other operator control and gives the signal to another operator from the ground floor. 

The ground man operator holds the handheld crane pendant and when the crane moves in the forward direction and crosses the line at that time the operator also has walked along with the crane because of wired connectivity.  

 Superiority and drawback of pendant switch for hoist and EOT crane:

 Advantages:

First of all the pendant switch for hoist has a wired connection which means all the transmission takes place through the wired only. Because of this, it provides fast and secure transmission as compared to the wireless remote control. The crane pendant is connected with many internal wired routes. 

And hence if any problem occurs or any defects are found in the routes then it suddenly switches to another route so that transmission can continue. While if the same problem happens with the wireless remote control at that time the transmitter stops them working immediately.

Another thing is that it has a wired connection so it doesn't require a battery or charging facility.

 Disadvantages:

The main drawback of the crane pendant is that the operator has to go inside the cabin of the overhead crane which is very risky. The accidental heavy load drop can cause the operator's life in danger. Another problem is that the operator also has to walk along with the overhead crane when the crane passes the line in a forward or backward direction.

At this time the operator keeps his eye on the crane and he may be messed up with the obstacles and the operator may fall, slip or trip at that location which is also very risky. 

 Closure:

The above points suggest that the crane pendant has some advantages and some drawbacks and where it can be used for. The wired and wireless remote control has its own features. Since crane pendant is now a part of industry and more in demand. So manufacturing of pendant push button is increasing widely.

The Anand systems engineering private limited is the leading crane pendant control manufacturers in India. And these are made in such a way that they can be used in harsh conditions also. The Anand data pendants are customizable which means they are made according to the customer's need. The crane pendant control are also configured with stability and reliability and these device can be used for a time.  

[digitalanand2]

What is crane pendant push button switch for hoist and EOT crane?

Crane pendant push button switch:

The crane pendant push button is a device that is used to control the hoist or EOT crane. This device is a main part of the EOT crane also called a crane control unit or crane pendant station. The crane inspector or moderator checks it first if any error or interruption is found in the crane control unit. The long cable wire dangles down from the hoist and is attached to the crane pendant and this wire is called crane pendant cable. 

The crane pendant is operated by the operator to control the hoist and crane. The hoist is used for lifting and lowering heavy-duty objects. There are few buttons present on the crane pendant push button that can move the crane in directions like long travel, cross travel, and main hoist. The crane pendant control is equipped with the wired systems and they take the electric power the same as the overhead crane gets.

 How crane pendant switch works:

The overhead crane is operated by the operators with the help of a crane pendant switch. The transmitter is a handheld device that is connected to the crane through a wired system and this transmitter is operated by the operator. There are two persons required for to manage the overhead crane in case of wired systems.

The first man sits in an overhead crane while the other person operates the crane pendant push button station. The person on the ground gives the signal and guide to another operator. When the person presses any button on the transmitter then it sends the signal via the wired systems. The buttons present on the transmitter are interlocked horizontally. That means you cannot press multiple buttons at the same time.

When the overhead crane travels and crosses the line that the operator also has to walk alongside the EOT crane due to the wired systems. The EOT crane pendant has many types like 2 buttons, 4 buttons, 6 buttons, 8 buttons, and 10 buttons. These types have their specification and features.

The main disadvantage of a crane pendant is that the operator has to sit inside the overhead crane which is very risky and another thing is that the ground operator walks along with the crane, here the operator may mess up the obstacles and can fall, sleep or tripped which is potentially dangerous.

 Requirement of crane pendant push button station:

The pendant push button is equipped with many wires and fully works on the wired systems because of this they don't need any charging or battery replacement systems. Due to the wired connection, the transmission does safely and rapidly. The transmission is very secure between the start and endpoint. 

If any slowness or error is found in any route then it immediately changes to the other network so the communication can continue. In the case of radio remote control if there is some error found between the transmitter and receiver then the transmitter suddenly stops working and hence communication is affected.

The crane pendant push button station doesn't affect by the external force or outsider attack due to the end wired connection.   

 Cessation:

The above points show that why there is a requirement for crane pendant push button switch. The crane pendant has some advantages and some pitfalls. From the industrial point of view, there is the necessity of remote control for overhead and hoist cranes. It can be either wired or wireless systems.

The crane pendant switch comes under the wired systems. And this type of device is manufactured by the Anand systems engineering Pvt. Ltd. The pendant push button is made in such a way that it can be used in a harsh conditions also. The device is also configured with stability and reliability. The crane pendant switch is customizable which means they are made according to the customer's requirement.

[digitalanand2]

How Crane pendant control switch works for hoist and EOT crane

What is a crane pendant control switch:

From the name, we can think that it is a part of the crane that is used to control the hoist and it is attached to the overhead crane. The crane pendant which is connected to the hoist also called a crane control unit or crane pendant station. The hoist is used for the lifting and lowering a heavy objects with the help of wired ropes. This hoist can be controlled by either wired remote control or wireless remote control. The crane pendant control switch fully works on the wired system. The pendant push button is connected with a cable wire which goes to the overhead crane. This cable wire is called a crane pendant cable. The long cable wire is suspended from the hoist and dangles like a pendant, hence it is known as a crane pendant. The crane pendant push button station is the most important part of the overhead crane. If any issue or bugs are found then the crane inspector first checks the crane pendant station. 

 How crane pendant push button switch works:

The crane pendant push button is operated by the operator to control the overhead crane. Sometimes there are two operators needed to control the crane. The first operator is a monitor and guides the other operator with a crane pendant in hand. While the other operator goes into the overhead cabin which is very risky. The first operator uses the crane pendant switch to move the crane in an appropriate direction. And the crane can be moved in a direction like long travel, cross travel, and for hoist lifting and unloading the heavy objects. The ground man operator walks along with the overhead crane because of the wired connectivity with the crane pendant. The crane pendant push button switches are interlocked which means if a down button is pressed at that time you cannot use another push button until the overhead crane reaches its destination. Once the first operation is complete then only you can switch to the other push buttons. 

 Features of EOT crane pendant:

The crane pendant push button is configured with many features so that it can work properly and they are as follows:

 1. Crane pendant configured in such a way that it can protect from shock and corrosion. 

2. This device provides an easy grip and control so that it can easily handle from one hand also.

3. It is fully covered with gasket materials so that it can be secured from contaminants.

4. The button functions present on the pendant are easily readable. 

5. The device can be used for both AC(Alternate Current) power and DC(Direct current) power.

6. It is also configured with the pre-wired circuit for simple connection.

7. The pendant push button is certified by the NEMA(National Electrical Manufacturers Association).

 Need of crane pendant push button station:

The crane pendant push button station is equipped with wired routes that provide better speed and connection when communication happens with the transmitter. The external interruption or outsider attack can not affect the transmission process due to the wired route systems. The crane pendant station which is attached to the hoist has many wired connections because of this if any deadlock or dead spot is found in the route then it immediately switches to another route and continues with the communication. While in the case of a wireless remote system if any lag or error happens then the transmitter suddenly stops the working communication between the transmitter and receiver. Crane pendant has a wired connection because of this it does not require any battery or charging systems. Rather it takes the energy same as the overhead crane gets. 

Conclusion:

The crane pendant switch is used for hoist and overhead crane for industrial purposes. As there is more demand in the industrial sector for crane equipment tools and hence many manufacturing industries built the same. Crane pendant push button is also one of them. The top-quality crane pendant push button for the hoist and crane is manufactured only from the Anand systems engineering Pvt. Ltd. This device provides the stability and durability and can be used in tough conditions also.

[digitalanand2]

Why choose the crane pendant push buttons for EOT crane?

What is a pendant push button:

The EOT cranes and hoists are controlled by a wired or wireless device. The wired device has a cable wire which is connected to the hoist. The cable wire is directly connected to the controlling device of the crane. The wire is suspended from the hoist crane and hung like a pendant hence it is known as the crane pendant push button. The crane pendant is a main part of the crane and it is also called a crane pendant station or crane control unit. This device manages the EOT crane & hoist and can be controlled in a direction like long travel, cross travel, and lifting and lowering heavy-duty objects with the hoist. The crane pendant switch work on completely wired systems and they don't need a charging system or battery instead they take electric power as same as the EOT crane gets.   

 Working behavior of crane pendant push button station:

As we know the crane pendant push button is directly connected to the EOT crane through a long cable wire known as crane pendant cable. And this crane pendant station is used by the operators to manage the crane. Generally, there are two operators required to controlling the EOT crane. The first goes into the cabin of the overhead crane to check and maintain the order of the EOT crane while the second operator stays on the ground floor to guide and gives the signal to the other operator. The ground operator also has to walk with the crane moment when the overhead crane traverse the cross line due to wire connectivity. While walking with the overhead crane the operator has to be careful, because while controlling the crane the operator can be messed up with the obstacles which is potentially dangerous.

 Types of crane pendant push buttons:

The pendant push button control for overhead crane comes in various types with features and attributes and they are as follows. 

 2 Buttons crane pendant:

It is used to moves to the crane in an up and down direction.

 4 Buttons crane pendant:

The 4 buttons crane pendant is equipped with the up, down, start, and stop configurations.

 6 Buttons crane pendant:

The six buttons crane pendant is used for start, stop, up, down, east and west directions.

 8 Buttons crane pendant:

This type of device is used to control the crane for start, stop, east, west, up, down, north, and south directions.

 10 Buttons crane pendant:

The 10 buttons crane pendant is configured with the one-speed version, two-speed version, start, stop, up, down, north, south, east and west moments.

  Need of crane pendant control switch:

The pendant switch for hoist is configured with the wired systems which provide a fast and secure connection between the crane pendant and overhead crane. The crane pendant is connected with many wired routes because of this if an error or dead spot is found in any route then immediately switches the network and continue with the communication. In the case of wireless radio remote control systems if any lag or error is found then the device stops them from working immediately. The wired connection is also helpful in the external interruption.

Conclusion:

To get a fast and secure connection the pendant crane control can be considered first. The pendant push button has some advantages and also comes with pitfalls. It comes with the wired system which helps in the fast transmission but there is some drawback that the operator has to inside the overhead crane which is very risky. Depending upon the features you can buy the pendant push button for EOT crane from Anand systems engineering Pvt. Ltd., because it is the leading crane pendant control manufacturers in India. The Anand crane pendants are made in such a way that it provides the durability and stability that means it can be used for a longer time with a good condition.

[digitalanand2]

How crane pendant push button is used for Industrial use?

What is a pendant  push button:

A push button pendant is a part of the overhead crane which is used to manage the hoist connected with the overhead crane. The managing device is called a crane control unit or crane pendant station. The pendant push button is connected to the hoist crane with the long wire cable called a crane pendant cable. Since it's a wired system so it does not need a charging or battery system. With the help of the crane pendant push buttons system, the overhead crane can be moved in particular directions like long travel, cross travel, and lifting and lowering heavy materials. Industrial machines, especially EOT cranes and hoist cranes, can be easily controlled from the factory floor. Various switch combinations can be realized using single speed, double speed, or potentiometer.

 Working postulate of crane pendant:

The push button pendant works on the push button system present on the crane pendant. And this crane pendant is managed by the operator. Sometimes there are 2 men required for controlling the overhead crane. The first man sits in the EOT crane while the other man guide and gives the signals from the ground floor. The crane pendant is connected with the cable wire and suspended from the hoist crane like a pendant which is used by the operator. The operator has to walk alongside when the crane passes then run away due to the wired system. The buttons present on the crane pendant switch are interlocked. That means at a time you cannot perform more than one function. If you press the up button at that time no other buttons can be pressed until you release the up buttons. 

 Types of Pendant push buttons:

To control the hoist and EOT crane pendants push buttons are used. And this EOT crane pendant push button also has many types. They come in various types like 2 buttons, 4 buttons, 6 buttons, 8 buttons, 10 buttons, and 12 buttons. These all types of crane pendant has their features. The 2 buttons can be used to move the crane in an up and down direction. The 4 buttons crane pendant is used for the start, stop, up, and down directions. Similarly, the 6 buttons are used for the on, off, east, west, up, and down directions. The 8 buttons are used for the up, down, east, west, on, off, north, and south direction. The 10 buttons are used for the east, west, up, down, north, south, on, off, one-speed version, and two-speed version button to control the EOT crane. These all types are made by the Anand system engineering Pvt. Ltd.

 The dominance of pendant push buttons station:

 As we know that the pendant push button is equipped with the wired systems so all the transmission takes place through the wired only. Hence there is very little chance of an external interruption or hack from the outside. Because the wired system provides a fast and secure connection with the receiver. There are many wires connected to the hoist system for the transmission of signals. And if found dead spot or lag in the activity in any route then it switches to another route instantly. In the case of wireless radio remote control if any lags are found then it stops working instantly. The crane pendant push button uses the power supply the same as the EOT crane gets. Due to the wired systems, the pendant push button switch doesn't require any charging facility or replaceable battery.

 Conclusion:

The above points show that a wired system can also be used for transmitting and receiving the signals for the EOT and hoist crane. The wired system and wireless system has their specification and both can be used. Anand systems engineering Pvt. Ltd. is the leading manufacturer of crane pendant push buttons in India. These crane pendants are made according to the customer's need and customizable.  

[digitalanand2]

What is a crane pendant station and how does it work?

Crane Pendant:

The Crane pendant is nothing but a connection from the overhead crane to the controller through the wired system. And the wire hangs from the crane looks like a pendant that is why it is known as a crane pendant. The crane pendant is controlled by a device called a crane pendant push button station. This crane control unit is the main part of the crane. This controller moves the crane in a direction like long travel, cross travel, lifting and lowering, and heavy objects. The Crane pendant is the first place where crane inspectors or maintenance personnel should check in the event of a failure. It draws power from the same power source that powers the crane itself.

 Working of crane pendant station:

The overhead crane and pendant push button are connected through a long cable. And the overhead crane is controlled by crane control unit. The pendant switch comes in various button types like 2 buttons, 4 buttons, 6 buttons, 8 buttons, and 10 buttons. These different types of push buttons and has their own features and controls. Mostly the crane is operated by an operator who sits in the cabin of the crane and is guided by another operator from the ground. So there is much need for communication between the operators. 

The pendant control switch can be connected to the crane itself, or like many modern cranes, it can be a remote radio unit. The operator control the cranes with the help of cable connected to the pendant. When the crane crosses the runway, the operator walks beside the crane. You can use the pendant to control the lifting of the load. The crane control unit contains a low power duty switch that is connected to the cable. The user has to manually push the buttons on the pendant switch in order to move the crane.

 Benefits of pendant switch for hoist:

The main benefit of the pendant switch is that it comes with a wired system. This means there is no external interruption of current in a crane control unit. The pendant switch is hung from the crane so there is very little chance of dropping the control or misplacing it. The crane pendant control switch fully works on the wired system so there is no need for a battery for replacement. The eot crane pendant is designed in such a way that it can lift and lower heavy objects as they enable a direct line of sight control for the motors. In the pendant switch for EOT crane we can use one button at a time it means that if we want to move the crane in a particular direction then we have to press the button continuously until it reaches its direction.

 Supplier of pendant push button switch:

Since the industrial sector is increasing widely due to this industry works and equipment are more in demand. Pendant push buttons are also one of them. And it is manufacturing from many companies as required. But the best crane pendant control manufacturers in India are produced by Anand systems engineering private limited. This pendant switch is customizable and durable according to the customer's needs. The crane pendant is designed in such a way that it can be used in harsh conditions and for a long time duration.

Conclusion:

To lifting and handling heavy objects the push button can be preferred over the radio remote control. The pendant push button is specially designed for EOT cranes and heavy industrial equipment. And the main thing is that the pendant switch comes with a wired system that provides reliability and stability.

[digitalanand2]

What is a pendant push button switch and how does it works?

Pendant push button:

The pendant push button is used to control the EOT crane or hoist. The crane pendant station controls the overhead crane with a wired mechanism. Many wire cables are connected from the pendant to the control panel. As soon as the switch button is pressed on the control panel then it immediately provides power to the motors. The crane pendant can control the many moments of the crane including the start and stop buttons. The term crane pendant is designed and commonly used to describe the control unit connected to the crane's electronic mechanism. The device is connected to a long cable and hung from an overhead crane like a pendant. Also known as overhang control or overhang control unit. It draws energy from the same power source that powers the crane itself.

 How does the pendant push button switch work?

The pendant push button station works can work with the help of two men. The one who is on the ground floor guiding another man sitting in the cab of an overhead crane or it can be controlled from the ground using buttons or toggle controllers. This control unit can be connected to the crane itself or, like many modern cranes, it can be a remote radio unit. The operator uses a pendant button with a cable attached to the crane and suspended from the overhead crane to control the crane. When the crane crosses the runway, the operator walks alongside the crane. You can use the pendant to control the lifting of the load. Until about ten years ago, all bridge cranes were operated by wired suspension control devices. Industrial machinery, especially EOT Crane & Hoist can be easily controlled from the factory floor. Several combinations of switches can be made using a single speed, double speed, or potentiometer. Any number of buttons requires only four cables of 0.25sq mm main. The button has a top layer of silicones to protect the label from the button.

Types of push-button pendants:

Pendant push button control has many types and they are as follows:

1) Two Buttons:

The EOT crane can be operated in only 2 directions i.e. one up and another in the down direction.

2) Four Buttons:

The four-button push-button pendant switch can control the crane in an up, down, start and stop manner.

3) Six Buttons:

The six-button can comprise the overhead crane in on, off, east, west, up, and down directions respectively.

4) Eight Buttons:

The eight buttons of the pendant switch comprise the hoist crane in up, down, on, off, east, west, north, and south direction.

5) Ten Buttons:

 The ten button push-button switch can operate the EOT crane in on, off, up, down, east, west, north, south, one-speed version, and two-speed version in a respective manner.

 Reason for choosing pendant control switch:

A pendant control device, or simply a crane pendant device, is a crane control device connected to a crane mechanism. This type of devices are used to control EOT crane operations from the ground without the guidance of ground crews. Nowadays, many cranes use radio-operated control equipment, which can be controlled from a distance. Either the radio remote control or pendant crane control both the devices and their own some advantages and some cons so choosing the controlling the device for EOT cranes is absolutely up to you.

Many industries built the pendant for EOT cranes but the best crane pendant control manufacturers in India you will only get from the Anand systems engineering privately limited. Anand pendant cranes are designed in such a way that they can use for harsh conditions industrial purposes. This pendant switch reduces the manpower because sometimes another man is required to operate the cranes.