New Post has been published on Technology, Puzzle, Brain Games, Current Affairs, Food, Knowledge
New Post has been published on http://exuberantindia.com/money-saver/home-water-filter-money-saving-idea-even-for-pull-down-faucet/3866
Home water filter - money saving idea even for pull-down faucet
Home water filter – money saving idea even for pull-down faucet
Clean, tasty drinking water is important. City water is usually pretty good but most of the time has high chlorine levels giving that aftertaste.
So what are the solutions
Water bottles delivered to your doorstep
It is nice but does not come cheap. One bottle may cost up to $8.50 delivered and off course water dispenser that will take some space
Fill water from some RO dispenser
while the water is great, requires your own bottle, travelling to pickup and refill and of course water dispenser that will take some space
These are great but not for all types of faucets especially pull-down type faucet
The life span may also be 3 to 6 months before you change filter
Let me show a new one that I learnt from help with someone working at the home depot. How can this help?
You have a pull-down faucet so you cannot use faucet filter or at least not easily
You don’t want expensive bottle delivery
You don’t want to drive around to fill water
Here is your under $50 solution that would last for years upto 5 years depending upon filter, water and your usage.
You can use a refrigerator water filter that have average life span from 3 to 5 years
Here are the items you would need. You can easily get these from home depot
Two adapters for kitchen cold line
Here are some important notes and disclaimers
Never connect the filter to a hot water line
Get the fittings based on your faucet connectors. Sample here are based on standard fittings usually used
This is just a money saving ideas, please use this on your own responsibility
Items needed for the project
Male to male ⅜ to ¼ adapter
Male to female ¼ to ⅜ adapter
Just anything that will work with your kitchen fittings
Turn off the cold water line
Use the wrench to open the pipe connected with kitchen faucet. Be prepared for some spill from the residual water in the pipe
Use one of the adapters to connect the cold line (⅜) to the ¼ pipe
Hook the other end of this pipe to the inlet valve of the filter. Please carefully look for the inlet valve marked with “IN” on the filter and connect it appropriately
Connect the second ¼ pipe to the outlet valve marked with “OUT” on the filter
Use the second adapter ¼ side to connect to this pipe and ⅜ side to the kitchen faucet pipe that was opened earlier
Make sure all connections are tight and use wrench as needed
Run the water and check for any leaks. Leaks may be caused by improper connection or incorrect adapters. Please verify everything is connected correctly.
Run the water for at least 15 minutes or as mentioned in the filter manual
Cold line water will now be filtered
Please follow and like us:
var addthis_config = url: "", title: ""