The project was tedious and challenging but totally worth it. Steps I used are as follows (with lots of drying time in between): sand the tile with 150 grit sandpaper, deep clean, caulk the grout lines to disguise flaws (we had a lot of cracks in grout, 2 coats of bonding primer, 3 coats of base gray chalk paint, 1 coat of stenciled white chalk paint, then fine paint detailing to make the edges sharper since some of the paint bleeds through the stencil (I used a clean old makeup brush). I finished up with 3 coats of Satin finish polyurethane to protect everything. I used spray glue to try and prevent bleeding by spraying the stencil, then rolling on the white paint. Even though I used gorilla spray glue, I had some bleeding so I used the makeup brushes to clean up the edges. The glue was helpful; when I tried without it, the bleeding was much worse. Toward the end, I cut the stencil to make getting around the nooks and crannies easier. If you have a little space you might want to buy two so you have one to trim down. #diywoman #diywomen #reclaimed #reclaimedvintage #rustoleumchalkpaint #cuttingedgestencils https://www.amazon.com/gp/product/B0067NK66M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 https://www.amazon.com/dp/B001EUII2M?tag=glimpseamzn20-20&ref=pf_ov_at_spk_ssp&linkCode=ic7 https://www.amazon.com/dp/B07BRR3JD6?tag=glimpseamzn20-20&ref=pf_ov_at_spk_ssp&linkCode=ic7 https://www.amazon.com/dp/B010I5D54E?tag=glimpseamzn20-20&ref=pf_ov_at_spk_ssp&linkCode=ic7 https://www.amazon.com/dp/B010FEBFOA?tag=glimpseamzn20-20&ref=pf_ov_at_spk_ssp&linkCode=ic7 https://www.amazon.com/dp/B00J9Q58VC?tag=glimpseamzn20-20&ref=pf_ov_at_spk_ssp&linkCode=ic7 (at Carmichael, California) https://www.instagram.com/p/B3Abmjin6zD/?igshid=zqd60693ctb7
