Top Kat Painting

[topkatpainting2]

7 Signs Your Home Exterior Needs Repainting: A Perth Painter's Guide

Most homeowners do not notice that their exterior paint is failing until the damage is already advanced. By the time paint is visibly peeling or render is cracking, the underlying surface has often been exposed to moisture and UV for longer than it should have been. In Perth's climate, where UV radiation is among the highest in Australia, exterior house paint breaks down faster than in most other parts of the country. Knowing the early signs means you can address the problem before it becomes a significantly larger job. Here are seven signs that your home exterior needs repainting and what each one means in practical terms.

Sign 1 Chalking on the Wall Surface

Run your hand across the exterior wall of your home. If a white or coloured powder comes off on your palm, the surface is chalking. This is one of the most common conditions in Perth homes with exterior wall paint that has not been refreshed in several years.

Chalking is caused by UV breakdown of the paint binder, the component that holds the pigment together and bonds the paint to the surface. Once the binder degrades, the pigment becomes a loose powder. This is not just a cosmetic problem. A chalking surface cannot hold new paint. Applying exterior house paint directly over chalking render without sealing it first results in poor adhesion and early peeling of the new coat.

The correct approach is pressure washing to remove the chalk, followed by a penetrating sealer, crack filling, priming, and then the topcoat system. This preparation sequence is the most commonly skipped stage on budget exterior painting jobs, and the reason many repaints fail within 18 months.

Sign 2: Visible Cracking at Mortar Lines or Window Reveals

Fine cracks at mortar lines, around window frames, and at parapet tops are a normal result of thermal movement in Perth's climate. Temperatures can vary by 30 to 40 degrees between a summer afternoon and a winter morning, and the substrate expands and contracts accordingly. When exterior paint loses its flexibility with age, it can no longer accommodate this movement and cracks appear.

Small cracks that are ignored become larger cracks. Larger cracks allow moisture into the substrate, which causes further damage during cold periods when trapped water expands. Addressing cracking early with flexible filler, sealer, and primer before repainting is significantly less expensive than addressing the substrate damage that follows.

Sign 3 Fading That Reads Unevenly Across Elevations

Exterior paint does not fade uniformly. North-facing walls in Australian homes receive the most direct UV exposure and typically show colour breakdown before south or east-facing walls. When you look at a house exterior and notice that different walls appear to be different colours or that one elevation looks significantly more faded than others, the paint system has reached the end of its serviceable life on the most exposed surfaces.

Uneven fading also indicates that the original paint system may not have been UV-rated appropriately for each elevation. A quality exterior painting specification accounts for the different UV exposure on each face of the building. North-facing walls often benefit from a higher-performance product than south-facing ones.

Sign 4 Peeling or Flaking Paint

Peeling outdoor paint is the most visible sign of adhesion failure. When paint peels, it means the bond between the coating and the substrate has broken down either because the surface was not properly prepared before the previous paint was applied, because moisture has penetrated and is pushing the paint off from behind, or because the wrong product was used for the substrate.

In Perth, peeling is common on south-facing eaves and fascias, where moisture accumulates without the benefit of direct sun to dry it quickly. It is also common on older rendered homes where the original paint was applied over an unprepared chalking surface. Peeling paint is not a problem that can be solved by painting over it; the loose material must be removed, the substrate stabilised, and the surface prepared correctly before any new coat is applied.

Sign 5: Mould or Mildew Spots

Black or grey spotting on exterior surfaces, particularly under eaves, on south-facing walls, and in shaded corners, is mould. Outdoor paint for houses that is nearing the end of its lifespan loses its mould-inhibiting properties, and the surface becomes susceptible to mould growth. In Perth, this is most common after winter, when prolonged moisture and lower temperatures create conditions for mould to establish.

Painting over mould without treatment is a temporary measure at best. Within weeks, the mould returns through the new topcoat. The correct sequence is a chemical wash, typically a diluted bleach solution, followed by drying, a mould-inhibiting primer, and then the topcoat system. Skipping the treatment stage is one of the most common errors in exterior painting jobs completed without professional oversight.

Also See: Top Kat Painting

Sign 6: Deterioration on Eaves, Fascias, and Soffits

Eaves and fascias are frequently overlooked in exterior repaint assessments because they are above eye level. They are, however, among the first surfaces to show paint breakdown exposed to both UV from above and moisture from rainfall, with less direct sun to dry them quickly. Peeling, flaking, or timber that appears grey and weathered on eaves and fascias is a sign that the exterior painting on these surfaces is overdue.

Timber fascias that are left unpainted for extended periods begin to grey, split, and eventually rot. Repainting at the right time, when the surface is still sound costs a fraction of what timber replacement costs after the damage is advanced. A complete exterior repaint always includes eaves, fascias, and soffits as part of the standard scope.

Sign 7: The Paint Is More Than 10 Years Old

Even exterior surfaces that show none of the above signs may be approaching the end of their serviceable life. A quality exterior house paint system, correctly prepared and applied, typically lasts eight to twelve years under Perth's conditions. Beyond that point, the paint's protective properties, UV resistance, moisture barrier, and flexibility diminish even if the surface still looks reasonable. Waiting until obvious failure appears before repainting means the surface has been exposed without adequate protection for longer than it should have been.

If the last time your home was repainted was more than a decade ago and you are not sure of the surface condition, a free assessment from a professional exterior painting service is the most straightforward way to understand what the property actually needs.

Also See: Residential Painting Services 

What to Do When You Spot These Signs

The first step is an on-site assessment, not a quote. A professional exterior painting contractor should inspect the surface condition before a product or price is discussed. The preparation required depends on what the surface actually presents: chalking, cracking, mould, moisture damage, or simple age. A quote that arrives without a site visit cannot account for any of these variables accurately.

When requesting quotes, ask specifically what preparation is included for each surface. A professional quote will itemise the preparation, pressure washing, sealing, crack filling, and priming separately from the paint application. A quote that refers only to the number of coats without preparation details is not a complete document.

Chalking

The UV-breakdown surface cannot hold new paint

High repaint within one season

Cracking

Thermal movement moisture entry risk

High address before winter

Uneven fading

End of paint lifespan on exposed elevations

Medium plan to repaint in the next 12 months

Peeling

The adhesion failure substrate may be compromised

High assess substrate before repainting

Mould

Paint protection has failed; mould treatment is required

Medium-High treat before repainting

Eave deterioration

Timber at risk: repaint before rot sets in

High address immediately

Paint over 10 years old

Protective properties diminishing

Medium schedule assessment

[topkatpainting2]

The Interior Painting Mistakes Most Homeowners Make And How to Avoid Them

Most interior painting projects that fail do not fail because of the paint. They fail because of decisions made before the paint was opened. Wrong sheen level. Skipped primer. Interior wall paint was applied over a surface that was never properly prepared. These are not minor details; they are the difference between a finish that holds for a decade and one that starts marking, fading, or peeling within a year. After completing hundreds of interior painting services across Perth homes and commercial spaces, the same mistakes recur. This article covers the ones that matter most and what the correct approach looks like.

Mistake 1: Using the Same Paint on Every Interior Surface

This is the most common interior painting mistake, and it is immediately visible to an experienced eye. Walking into a room where the ceiling, walls, and trims have all been painted with the same product produces a finish that looks wrong even if the homeowner cannot immediately identify why. The reason is sheen. Different surfaces have different requirements, and interior paint is not a single product applied uniformly.

Ceilings

Flat / Matte ceiling paint

Absorbs light, hides imperfections, and joins

Living room and bedroom walls

Low-sheen acrylic

Clean finish, lightly wipeable, consistent under light

Kitchens and bathrooms

Satin acrylic

Moisture-resistant, easy to wipe clean

Hallways and family rooms

Eggshell

More durable than low-sheen under heavy foot traffic

Doors, trims, skirting boards

Semi-gloss

Hard, durable, handles daily contact without marking

Applying low-sheen interior wall paint to a door trim produces a surface that marks within weeks. Applying semi-gloss to a ceiling makes every surface imperfection visible under light. Neither result looks professional, and neither is easy to fix without repainting the affected surface entirely.

Mistake 2: Skipping Surface Preparation

Surface preparation is the stage that determines how long an interior finish lasts. According to the Australian Paint Manufacturers' Federation, inadequate surface preparation is the leading cause of premature paint failure, ahead of product quality and number of coats. The best interior paint on the market will fail on an unprepared surface. A budget product on a correctly prepared surface will outlast it.

What Preparation Actually Involves

• Filling cracks and holes: Using the correct compound for the substrate. Flexible filler for surfaces subject to movement around door frames, at ceiling joins, and in older plaster. Rigid filler for stable areas.

• Sanding: Repaired areas must be sanded smooth before primer or topcoat is applied. Unsanded patches read through the topcoat as raised areas; no amount of additional coats will hide them.

• Priming bare surfaces: New plaster, repaired areas, and any bare substrate require a primer coat before the topcoat. Primer is the adhesion layer. Without it, the topcoat fails to bond correctly, and the finish degrades faster than expected.

• Stain blocking: Water stains, smoke marks, and tannin bleed from timber all require stain-blocking primer before topcoat. These marks will bleed through two or three standard topcoats regardless of the paint quality used.

• Mould treatment: Mould on bathroom or laundry walls must be chemically treated before painting, not painted over. Painting over active mould delays its return by weeks. A mould-inhibiting primer applied after treatment extends the result significantly.

Frank's Note:

"The preparation stage takes longer than the painting on most interior jobs. When a quote seems unusually low, the preparation is almost always where the savings have been made. That saving shows up in the finish within 12 months."

Mistake 3: Choosing Paint Colour Before Seeing It on the Wall

Colour selection from a chip or a screen is one of the most reliable ways to end up repainting a room. Interior paint colours shift significantly between a small sample chip and a full wall, particularly under artificial lighting, which almost always reads differently from the natural light the chip was viewed in at the paint counter.

The correct approach is to purchase sample pots of two or three candidate colours, apply them to the actual wall in patches of at least 30 centimetres square, and observe them at different times of day, morning, midday, and evening under artificial light. North-facing rooms in Australian homes receive warm morning light that shifts cool colours warmer. South-facing rooms are cooler and flatter, which makes warm neutrals a more reliable choice. These are things a paint chip in a store cannot show.

Committing to a full room before testing a sample is the single most avoidable interior painting mistake. Sample pots cost very little relative to repainting a room that reads wrong.

Mistake 4: Painting Interior Doors Incorrectly

Painting interior doors requires a different approach to walls, and most DIY results make this obvious. Doors are vertical surfaces that show every brush mark, roller texture, and drip under direct light. The paint system matters, the application method matters, and the order of application matters.

The Correct Sequence for Painting Interior Doors

• Remove or mask hardware: Hinges, handles, and strike plates should be removed or masked. Paint on hardware looks careless and is difficult to clean.

• Sand lightly: Existing paint on doors builds up over multiple coats and eventually obscures the panel detail. A light sanding before repainting keeps the finish sharp.

• Apply semi-gloss in thin coats: Two thin coats of semi-gloss produce a better result than one heavy coat. Heavy application causes runs on vertical surfaces that are difficult to correct without sanding back.

• Work in sections: On panelled doors, paint the recessed panels first, then the horizontal rails, then the vertical stiles. This minimizes visible joins and wet-edge marks.

• Allow full drying between coats: Semi-gloss takes longer to dry than low-sheen wall paint. Applying the second coat too soon causes the finish to lift and drag.

Also See: Top Kat Painting

Mistake 5 Applying the Wrong Product in Commercial Spaces

Commercial interior painting has requirements that residential painting does not. Offices, retail stores, and medical facilities are cleaned frequently with commercial-grade products, and standard residential interior wall paint is not formulated to hold up under this cleaning regimen. The finish dulls, marks, and eventually breaks down faster than it should.

For commercial interiors, washable acrylic system products with a higher binder content and greater resistance to abrasion are the correct specification. In healthcare and childcare settings, zero-VOC products are appropriate to maintain air quality during and after application. In warehouses and industrial spaces, coatings must resist abrasion and, in some cases, chemical exposure. Using a domestic interior paint product in these environments produces a result that requires repainting sooner and costs more over time than the correct specification from the outset. For a detailed breakdown of what professional commercial interior painting involves, the specification requirements differ enough from residential work to warrant separate consideration.

What to Look for in a Professional Interior Painting Service

Whether the job is a single room or a full home repaint, the indicators of a professional interior painting service are the same.

• Written quote with product specification: The exact paint brand, product name, and sheen level for each surface. A quote that refers to 'quality paint' without specifics tells you nothing about what will actually be used.

• Preparation detail: What preparation is included: filling, sanding, priming. If it is not in the quote, it is likely not in the job.

• Correct sheen per surface: A professional painter specifies different products for walls, ceilings, and trims as a matter of course, not on request.

• Workmanship guarantee: Coverage for preparation failures and delamination. A guarantee limited to obvious cosmetic defects in the first month is not a meaningful guarantee.

[topkatpainting2]

How to Get an Exterior Paint Job That Actually Lasts in Perth's Climate

Perth homeowners repaint their exterior more often than they should. Not because the work was done badly, at least not always but because the wrong product was specified for the wrong surface in a climate that is genuinely demanding. WA's UV radiation levels are among the highest in Australia, and paint systems that perform well in cooler or cloudier climates fail here within a few years. After painting homes across Bayswater, Morley, Maylands, and surrounding suburbs, the same patterns come up repeatedly. This article covers what actually determines whether an exterior paint job lasts and what causes most of them to fail earlier than they should.

The Climate Problem Most Perth Homeowners Do Not Account For

UV radiation is the primary cause of exterior paint failure in WA. According to the Australian Paint Manufacturers' Federation, UV exposure breaks down the binder in exterior paint, the component that holds the pigment together and bonds the paint to the surface. Once the binder degrades, the paint chalks, fades, and eventually loses its ability to protect the substrate underneath. This process happens faster in Perth than in most Australian cities, and significantly faster than in the UK or northern Europe, where many paint products were originally formulated.

The practical implication for Perth homeowners is simple: not all exterior paint products are equivalent, even when they appear to be. A product rated for coastal Australian conditions will outperform a standard acrylic by years on a Perth home. The difference in product cost is small. The difference in lifespan is significant.

Why Preparation Matters More Than the Paint

The most common reason an exterior paint job fails prematurely in Perth is not the product but the surface that the product was applied to. Painting over a chalking, cracking, or damp surface does not protect it. It accelerates the failure.

Chalking Render

Run your hand across the exterior wall of an older Perth home. If white or coloured powder comes off on your palm, the surface is chalking. This is a normal result of UV breakdown over time, but it means the existing surface cannot hold new paint. Applying a topcoat directly over chalking render results in poor adhesion and early peeling. The correct sequence is pressure washing, application of a penetrating sealer to consolidate the chalking layer, and full priming before any topcoat.

Surface Cracks

Fine cracks at mortar lines, window reveals, and parapet tops are common on Perth homes of any age. These cracks expand and contract with seasonal temperature variation up to 40 degrees between a summer afternoon and a winter morning in Perth. Painting over unsealed cracks without flexible filler guarantees they will reappear through the topcoat within a season. The filler compound matters too: a rigid product in a moving crack will fail as quickly as one with no filler at all.

Mould

Mould on exterior surfaces, particularly on south-facing walls and under eaves, must be chemically treated before painting. A diluted bleach wash kills surface mould, but the spores remain in the substrate. Without a mould-inhibiting primer over the treated area, the mould returns through the topcoat within weeks. This is one of the most common reasons a recently repainted Perth home shows black spotting on the render within months of completion.

Key Point:

Preparation takes longer than painting on most exterior jobs. A painter who quotes low on an exterior job in Perth has almost certainly reduced the preparation scope. That saving is visible within 12 to 18 months.

Choosing the Right Paint System for Each Perth Surface

Different exterior surfaces on a Perth home require different products. Applying a single system uniformly across rendered walls, timber fascias, and brick is a shortcut that affects how each surface performs.

Surface

What to Use

What to Avoid

Rendered masonry

UV-resistant acrylic — alkali-resistant primer first

Standard interior acrylic or budget exterior

Brick

Breathable penetrating primer — allows moisture movement

Impermeable system — traps moisture and causes bubbling

Timber weatherboard

Flexible primer — expands with timber movement

Rigid primer — cracks at joins in summer heat

Eaves and fascias

Exterior acrylic — UV and moisture rated

Interior paint — no UV resistance, fails rapidly

Roof tiles

Roof-specific coating — rated for direct sun

Standard exterior acrylic — not formulated for roof exposure

Quality Dulux and Taubmans exterior systems are formulated for the Australian climate and independently tested for UV performance. These products cost more per litre than budget alternatives, but the difference in lifespan on a Perth home is measurable, typically eight to twelve years for a quality system correctly applied, versus three to five years for a budget product on an under-prepared surface.

Also See: Top Kat Painting

The Question of Timing: When to Paint Exteriors in Perth

Perth's weather creates both opportunities and constraints for exterior painting. The city's dry summers are ideal for painting in terms of rain risk, but extreme heat above 35°C causes problems. Paint applied in high heat dries too quickly, creating application marks, poor film formation, and reduced adhesion. The ideal window for exterior painting in Perth is autumn March to May, when temperatures are moderate, humidity is lower, and the risk of both extreme heat and rain is minimised.

Spring is also suitable. Winter exterior painting is manageable on most days, with the main risk being rain forecast rather than temperature. Summer work is possible early in the morning before temperatures peak, but experienced Perth painters avoid painting between noon and 4 pm on days above 30°C.

What a Quality Exterior Painting Quote Should Include

When evaluating exterior painting services in Perth, the written quote is the most reliable indicator of what the job will actually involve. A professional exterior painting quote should specify:

• Surface-by-surface preparation: What will be done to each surface before any topcoat is applied: pressure washing, crack filling, priming. If preparation is not itemised, it is likely not included.

• Exact paint products: Brand, product name, and number of coats for each surface. A quote that refers to 'quality paint' without specifics is not a specification.

• Access method: For two-storey homes or elevated sections, how access will be achieved, such as scaffolding, elevated work platform, or ladders and whether this is included in the quoted price.

• Workmanship guarantee: A guarantee that covers preparation failures and delamination, not just cosmetic touch-ups in the first month.

[topkatpainting2]

Commercial Painters Perth: A Practical Guide for Business Owners

Key Takeaways

Commercial painters in Perth work across offices, retail stores, medical centres, warehouses, strata buildings, and commercial facades with different products and scheduling requirements for each.

The primary concern for most Perth businesses considering a repaint is disruption. Professional commercial painters plan every job around operating hours.

Interior and exterior commercial painting requires different paint systems, preparation methods, and application standards than residential work.

When Perth business owners search for commercial painters near me, the question behind the search is almost always the same: Can this be done without shutting down the business? The answer, with the right professional commercial painters, is yes. Commercial painting in Perth is planned differently from residential work; scheduling, products, and preparation all account for the fact that a business is operating around the job. This guide covers what business owners and property managers need to understand before engaging commercial painters in Perth for interior, exterior, and everything in between. For a full breakdown of what Top Kat Painting offers, see the commercial painting service page.

Commercial Interior Painters in Perth

The interior of a commercial property is used more heavily than any residential space. Surfaces in offices, retail stores, and medical facilities are cleaned frequently, exposed to constant foot traffic, and expected to maintain a consistent, professional appearance over a long period. Commercial interior painters specify paint systems that perform under these conditions, not standard domestic products applied to a larger surface.

Spaces Commercial Interior Painters Cover

• Offices and corporate fit-outs: Reception areas, open-plan workspaces, boardrooms, and breakout zones. Washable low-sheen or eggshell finishes are suited to regular cleaning with commercial products.

• Retail stores and showrooms: Clean, consistent finishes across large wall surfaces. Colour accuracy is critical in retail environments where the paint colour forms part of the brand presentation.

• Medical and childcare facilities: Zero-VOC or low-VOC paint systems are specified as standard maintaining acceptable air quality during and after application, allowing spaces to be reoccupied quickly.

• Warehouses and industrial interiors: Hard-wearing coatings resistant to abrasion, temperature variation, and in some cases chemical exposure. Standard interior acrylics are not appropriate for these environments.

• Strata common areas: Lobbies, stairwells, corridors, and car parks painted to a consistent standard across the full property, coordinated with strata managers and body corporate representatives.

Our interior painting service covers all commercial interior spaces with the correct product specification for each environment, and after-hours scheduling is available as standard.

Frank's Note (Top Kat Painting):

"The most common question I get from Perth business owners is whether we can paint without them having to close. The answer is almost always yes, but it requires planning the job correctly from the start. After-hours and weekend scheduling is not an afterthought for us. It is built into the quote."

Commercial Exterior Painters in Perth

The exterior of a commercial building is the first impression a business makes. Faded render, peeling paint on fascias, or a facade that has not been maintained tells clients and tenants something about the standard of the operation inside. Commercial exterior painters in Perth work with products and preparation methods suited to WA's UV intensity conditions that cause significant paint breakdown on surfaces specified for cooler or cloudier climates.

What Commercial Exterior Painting Covers

Surface

Preparation

Paint System Required

Rendered commercial facades

Pressure wash, crack fill, alkali-resistant primer

UV-resistant acrylic 2 coats minimum

Brick and masonry

Penetrating primer breathable system

Allows moisture movement, prevents delamination

Cladding and panel systems

Adhesion primer, flexible topcoat

Accommodates thermal expansion without cracking

Eaves, fascias, soffits

Sand, spot prime all bare areas

Exterior acrylic is moisture and UV-resistant

Car park floors and line marking

Degrease, abrasive preparation

Durable anti-slip coating rated for vehicle traffic

Multi-storey and elevated access

Scaffold coordination, safety plan

The standard exterior system access method varies

Perth's UV exposure significantly accelerates exterior paint breakdown. According to the Australian Paint Manufacturers' Federation, UV radiation is the primary cause of premature exterior paint failure in WA. Professional commercial painters account for this in the product selection; not all exterior paints are equivalent, and a system not rated for direct sun exposure will fail within a few years, regardless of how well it was applied. Our exterior painting service uses Dulux and Taubmans exterior systems formulated for Australian conditions on all commercial jobs.

Scheduling Around Your Perth Business: How It Works

Disruption to operations is the primary concern for most Perth businesses considering a commercial repaint. Commercial painters near me who genuinely understand commercial work plan every job around the operating requirements of the business, not around their own convenience.

Business Type

Scheduling Approach

Offices

After-hours or weekend work space ready for Monday morning

Retail stores

Overnight completion during trading days, or full weekend

Medical and childcare

Room-by-room staging during low-occupancy periods

Warehouses

Sectioned work areas, partial operations are maintained throughout

Schools

Completed during holiday periods, done before term resumes

Strata buildings

Coordinated with the body corporate to minimise resident disruption

Every commercial painting project Top Kat Painting undertakes includes a pre-work safety assessment and ventilation planning. Under Safe Work Australia guidelines, painting contractors working in occupied commercial buildings must comply with specific ventilation and hazardous substance requirements. Low-VOC product selection is applied where businesses remain occupied during the painting project.

What to Look for When Hiring Commercial Painters in Perth

The commercial painting market in Perth includes contractors of widely varying quality and commercial experience. When evaluating commercial painters, the following indicators separate professional operators from those likely to bring residential habits to a commercial environment.

• Written, itemised quote: Every surface listed with the specific paint product, sheen level, number of coats, and preparation detail. Vague scopes and verbal estimates are not adequate for commercial projects.

• Genuine after-hours capability: Not just an offer to work late, documented experience of completing commercial jobs outside business hours, with the crew and equipment to do it properly.

• Commercial product specification: The quote names the specific paint product and VOC rating for each surface. For commercial interiors, washability and chemical resistance ratings should also be stated.

• Licensing and insurance: Full public liability insurance and WA Building Commission registration. For commercial jobs, confirm the coverage limit is appropriate for the scale of the project.

• Strata and body corporate experience: Commercial painters who work in strata buildings understand the coordination requirements, communication with managers, scheduling around residents, and consistent finish across shared surfaces.

Frequently Asked Questions Commercial Painters Perth

What types of commercial properties do commercial painters in Perth work on?

Commercial painters in Perth work across offices, retail tenancies, medical centres, childcare facilities, warehouses, strata common areas, schools, and industrial buildings. Both new build painting and repaints of existing commercial properties are within scope.

Can commercial painting be done without closing the business?

Yes, with correct planning. After-hours and weekend scheduling allows most commercial painting projects to be completed without any disruption to business operations. The job is planned around the business's operating hours, with spaces returned to a usable condition before the business opens each day.

How long does a commercial painting project take in Perth?

A standard open-plan office of 200 to 400 square metres takes two to four days with a professional crew of two to three painters. Full building exterior repaints vary from three days to several weeks, depending on height, surface area, and access requirements. A detailed day-by-day schedule is confirmed in the written quote before work begins.

What paint products do professional commercial painters use?

Dulux and Taubmans commercial-grade interior and exterior systems are specified on all commercial jobs. Interior products are selected for washability and VOC rating. Exterior products are selected for UV resistance and substrate compatibility. The full product specification is listed in the written quote.

Do commercial exterior painters in Perth handle multi-storey buildings?

Yes. Top Kat Painting is equipped for elevated commercial exterior work, including scaffolding coordination and safety-compliant access systems for multi-storey commercial buildings. A pre-work safety assessment is completed before any elevated work begins.

[topkatpainting2]

Residential Painting Services in Perth: What Homeowners Need to Know

Key Takeaways

Residential painting services in Perth cover interior rooms, exterior facades, roofs, gutters, and full home repaints, each surface requiring specific preparation and paint systems suited to WA's climate.

Perth's UV intensity and heat place unique demands on exterior paint products not rated for these conditions, and they fail prematurely.

Professional residential painting services deliver results that last significantly longer than DIY, primarily because of preparation quality and product specification.

Searching for residential painting services near me in Perth means more than finding a painter who can apply a coat of colour. The condition of your home's surfaces, WA's demanding climate, and the specific requirements of interior versus exterior work all affect what a quality painting project involves and what it costs to do properly. This guide covers the full scope of professional residential painting services in Perth: what is included, how interior and exterior work differ, and what separates a result that lasts from one that does not. 

Residential Interior Painting Services in Perth

Residential interior painting services cover every painted surface inside a home walls, ceilings, doors, trims, skirting boards, and feature walls. In Perth homes, the interior environment is generally stable, but the preparation required before painting varies considerably depending on the age of the property and the condition of existing surfaces.

What Interior Painting Covers

• Walls: The largest interior surface in any room. Low-sheen acrylic is correct for most Perth living areas and bedrooms, durable, consistently presented, and easy to clean lightly without marking.

• Ceilings: Ceiling paint is a separate product from wall paint, flat finish, formulated to absorb light rather than reflect it. Applying wall paint to a ceiling is a shortcut that reads under direct light.

• Doors and trims: High-contact surfaces requiring a semi-gloss finish. Hard, wipeable, and durable under daily handling. Skirting boards and architraves are included in this category.

• Kitchens and bathrooms: Moisture-resistant satin finish. Perth kitchens and bathrooms are in regular contact with steam, water, and cleaning products; the paint system needs to hold up under these conditions.

• Feature walls: A single accent wall in a contrasting colour or finish. One of the most effective ways to change the character of a room without a full repaint.

Our full interior painting service covers all of these surfaces with the correct sheen specification for each area. Surface preparation, filling, sanding, and priming are completed before any topcoat is applied.

Frank's Note (Top Kat Painting):

"Interior painting in Perth is less about climate and more about surface condition. The homes in Bayswater, Morley, and Maylands that have the most preparation work are the ones where paint has been applied over unprepared surfaces multiple times. Undoing that and getting back to a stable base takes time but it is what makes the new finish last."

Residential Exterior House Painting in Perth

Residential exterior house painting in Perth operates under a different set of demands than interior work. WA's UV radiation levels are among the highest in Australia, and paint systems that perform adequately in cooler or cloudier climates fail here within a few years. A quality residential exterior painting service accounts for this at the product specification stage not after the paint has already failed.

Exterior Surfaces and What They Require

Surface

Preparation Required

Paint System

Rendered facades

Pressure wash, crack fill, alkali-resistant primer

UV-resistant acrylic topcoat 2 coats minimum

Brick exteriors

Penetrating primer breathable system

Allows moisture vapour movement, prevents bubbling

Timber weatherboard

Flexible primer, sand at joins

Flexible topcoat accommodates thermal movement

Eaves and fascias

Sand, spot prime

Exterior acrylic UV and moisture resistant

Gutters

Rust treatment, primer

Hard-wearing exterior enamel or acrylic topcoat

Roof tiles and iron

Full wash, primer

Roof-specific coating rated for direct sun exposure

Perth's north-facing walls receive the most direct UV exposure and typically show paint breakdown before other elevations. As part of every residential exterior house painting project in Perth, Top Kat Painting assesses each elevation separately. The same product applied uniformly across the full building is rarely the correct approach. For a full breakdown, see the exterior painting service page.

Why Professional Residential Painting Services Deliver a Better Result

The difference between professional residential painting services and a DIY approach is not simply skill it is preparation, product access, and time. These three factors determine how the finish looks and how long it lasts.

Preparation Quality

According to the Australian Paint Manufacturers' Federation, inadequate surface preparation is the leading cause of premature residential paint failure in Australia. Professional painters prepare every surface correctly before applying any topcoat, filling cracks, treating mould, priming bare areas, and sealing stains. This stage takes longer than the painting itself on most projects, and it is where low quotes typically find their savings.

Product Specification

Trade painters access Dulux and Taubmans products in commercial quantities and specify the correct system for each surface exterior UV-resistant topcoats for facades, moisture-resistant formulations for bathrooms, stain-blocking primer for water-damaged areas. Retail paint products are not always equivalent, and the selection process for a professional job involves more than choosing a colour.

Time and Disruption

A residential house painting project that a professional crew completes in five to seven days typically takes a homeowner three to four weekends with the property disrupted throughout and a finish that rarely matches a professionally prepared result. The cost of professional residential painting services near me in Perth reflects this not just the paint and the labour, but the preparation, the product knowledge, and the time saved.

How to Find the Right Residential Painter in Perth

Perth has a large number of residential painters and a wide variation in quality. When evaluating professional residential painting services, the following indicators reliably separate quality operators from those likely to cut corners on preparation or product.

• Written, itemised quote: Every surface listed with the specific paint product, sheen level, and number of coats. Verbal estimates are not sufficient and neither are quotes that reference 'quality paint' without naming the product.

• Licensing and insurance: Residential painters in WA should be registered with the Building Commission of WA and carry public liability insurance. Confirm both before work begins.

• Preparation detail in the quote: A professional quote specifies what preparation is included crack filling, priming, mould treatment. If this is not in the quote, it is likely not in the job.

• Workmanship guarantee: A guarantee that covers preparation failures and delamination not just a promise to fix obvious defects in the first week.

• Local experience: A painter who works regularly in your suburb understands the property types, common surface conditions, and preparation demands of the local housing stock.

Also Read: Top Kat Painting 

Frequently Asked Questions

What do residential painting services in Perth include?

Residential painting services in Perth cover interior rooms, walls, ceilings, trims, and doors and exterior surfaces, including rendered facades, brick, eaves, fascias, gutters, and roofs. The specific scope depends on the property and is detailed in a written quote. Full home repaints combining interior and exterior work are available as a single project.

How much do residential painting services cost in Perth?

Costs depend on the size of the property, surface condition, and the scope of work. Interior repaints for a three-bedroom Perth home typically range from $3,500 to $7,000. Exterior repaints range from $3,500 to $8,500. Full home repaints vary between $7,000 and $15,000. A written quote specific to your property is the only accurate figure.

How long does residential exterior house painting take in Perth?

A standard single-storey Perth home takes three to five days for a full exterior repaint, including preparation. Double-storey homes take five to nine days. Interior repaints of a three to four-bedroom home take five to seven days. Combined interior and exterior projects run eight to twelve days, depending on size and surface condition.

What exterior paint lasts longest in Perth's climate?

Quality acrylic exterior systems from Dulux and Taubmans, formulated for Australian UV and heat exposure, are the appropriate choice for Perth homes. A correctly prepared and applied exterior paint system should hold for eight to twelve years. Budget products on inadequately prepared surfaces typically fail within three to five years, regardless of brand.

Can I stay in my home during a residential painting project?

Yes. Top Kat Painting works room by room on interior projects and protects all floors and furniture with drop sheets throughout. Exterior work does not require homeowners to vacate. Spaces are returned to a liveable condition at the end of each working day.

What preparation is done before residential painting in Perth?

Surface preparation depends on the condition of each surface. Standard preparation includes pressure washing of exteriors, filling of cracks and holes, sanding of repaired areas, priming of bare or stained surfaces, and mould treatment where active mould is present. The preparation scope is specified in the written quote before work begins.

[topkatpainting2]

Why Perth Homeowners Are Choosing Professional Residential Painting Services in 2025

If you're planning a home refresh in Perth, hiring professional residential painting services can make the difference between a finish that lasts two years and one that lasts ten. Whether you're repainting a single room or your entire home's exterior, the right painter saves you time, money, and headaches, especially in Perth's demanding UV-heavy climate.

What Are Residential Painting Services?

Residential painting services cover everything from interior walls and ceilings to exterior facades, roofs, and feature walls. A qualified residential painter handles surface preparation, priming, paint selection, and application, then leaves your home spotless.

In Perth, where summers are harsh and UV exposure is extreme, professional surface preparation is not optional. It's what determines how long your paint job actually lasts.

Interior vs Exterior: What's Included?

Interior Residential Painting

A professional interior job covers:

Walls and ceilings — even coverage with quality low-VOC acrylics

Trims, doors, and skirting boards — clean cut-in work with semi-gloss finish

Kitchens and bathrooms — moisture-resistant coatings for wet areas

Feature walls — bold accent colours or decorative finishes

Good painters use the correct sheen for each surface: flat for ceilings, low-sheen for living areas, satin for kitchens and bathrooms. This isn't a stylistic choice; the wrong sheen shows every imperfection.

Exterior Residential Painting

Perth's climate demands UV-resistant systems applied over a thoroughly prepared surface. A professional exterior repaint includes:

Pressure washing and crack filling

Full priming on bare or chalking surfaces

Minimum two-coat topcoat using Dulux Weathershield or equivalent

Gutters, fascias, eaves, and window frames, not just the main walls

Skipping prep is the number one reason exterior paint fails within 2–3 years in Perth. Any contractor who doesn't mention preparation before painting is one to avoid.

Also Read: Top Kat Painting

How Long Does a Residential Repaint Take?

This is one of the most common questions Perth homeowners ask:

Job Type

Typical Duration

Single room interior

1 day

Full interior (3–4 bed home)

5–7 days

Exterior repaint

3–6 days

Full home (interior + exterior)

8–12 days

These timelines assume a professional crew. DIY attempts almost always take longer and produce less consistent results, particularly on ceilings and detailed trim work.

Choosing the Right Residential Painter in Perth

Not all painters are equal. Here's what to confirm before signing anything:

1. Licensed and Insured In WA, residential painters should be registered with the Building Commission. Always ask for proof of public liability insurance before any work begins.

2. Written Quote with Paint Spec: A professional quote should list the paint brand, product name, sheen, and number of coats, not just a price. This protects you if the job is completed with cheaper materials than agreed.

3. References or Portfolio: Ask to see recent work in your suburb or nearby. Perth conditions vary across the metro area; a painter with local experience will know which coatings perform best in your area.

4. Workmanship Guarantee: Reputable residential painters back their work. A minimum 2-year workmanship guarantee on interior work and 5 years on exterior is reasonable to expect.

Residential Painting Costs in Perth (2025 Guide)

Costs vary based on property size, paint specification, and condition of existing surfaces. As a general guide for Perth:

Service

Approximate Cost Range

Single room interior

$400 – $800

Full interior (3–4 bed)

$3,500 – $7,000

Exterior repaint (avg home)

$4,000 – $9,000

Full home repaint

$7,000 – $15,000+

These are rough estimates. Always get at least two written quotes that specify exactly what's included. The cheapest quote often excludes proper preparation or uses a single coat.

Frequently Asked Questions

Do I need to move my furniture before the painters arrive?

Clear loose items and create reasonable access. A professional crew will protect floors, furniture, and fixtures with drop sheets and masking tape as standard practice.

Can painters help me choose colours?

Yes, most professional residential painters in Perth offer colour consultation as part of their service. It's worth using this, especially for exterior work where the wrong colour choice is expensive to undo.

How disruptive is an interior repaint?

Experienced painters work methodically to minimise disruption. Most homeowners can remain in the property during an interior repaint, though you'll need to plan around access to specific rooms each day.

What's the best time of year to paint exteriors in Perth

 Autumn and spring are ideal mild temperatures with lower UV intensity allow paint to cure correctly. Summer heat can cause paint to dry too fast, reducing adhesion. Most Perth painters are booked 4–6 weeks out during peak season, so plan.

Is low-VOC paint worth the extra cost?

For interior work, yes particularly in bedrooms, children's rooms, and spaces with limited ventilation. Low-VOC paints have improved significantly in quality and durability over the past five years and are now a practical choice, not just an eco-preference.

[topkatpainting2]

Interior Painting Services: A Practical Guide for Homes and Businesses

Key Takeaways

Interior painting services cover every painted surface inside a property walls, ceilings, doors, trims, and feature walls.

The quality of surface preparation determines how long the finish lasts more than the paint brand or the number of coats applied.

Residential painters and commercial painters operate to different product specifications and scheduling requirements understanding the difference helps you choose the right contractor.

Most people searching for interior painting services have the same goal: a clean, lasting finish that looks professional and holds up over time. What separates a result that achieves that from one that does not is rarely the colour chosen or the brand of paint used. It is the decisions made before the first coat is applied: how the surface was prepared, which product was specified for each area, and whether the painter understood the difference between a residential wall and a commercial one. This guide gives homeowners and business owners the information they need to make those decisions well.

Interior Painting for Residential Properties

Residential painting inside a home involves more surfaces than most homeowners account for when they first consider a repaint. The full scope of a residential interior painting project typically includes the following and each requires a different approach.

Walls

Walls are the largest interior surface and the one with the most visible impact. The correct product for residential interior walls is a quality low-sheen acrylic durable enough for everyday living, easy to clean lightly, and presenting a consistent finish under both natural and artificial light. Preparation of the wall surface before painting is the stage that determines whether this finish holds for a decade or begins showing signs of failure within two years.

Ceilings

Ceiling paint is a separate product from wall paint. It is formulated with a flat finish that absorbs light rather than reflecting it, which hides the surface imperfections, joins, patches, and slight undulations that are visible in most residential ceilings. Applying wall paint to a ceiling produces a noticeably different appearance under direct light, and is a common shortcut that experienced painters do not take.

Doors, Trims, and Skirting Boards

These surfaces are in daily contact with handles turned, feet brushing skirting boards, and children touching door frames. The correct finish for doors, trims, and skirting boards is semi-gloss: harder, more durable, and easy to wipe clean without marking. Our full residential painting service covers all of these surfaces as standard; nothing is excluded because it is time-consuming.

Feature Walls and Decorative Finishes

A feature wall, a single wall in a contrasting colour or finish, is one of the most effective ways to change the feel of a room without repainting everything. The execution matters: clean, precise edges against the adjacent walls and ceiling, a consistent finish across the full surface, and a colour that works with the room's light rather than fighting it.

Frank's Note (Top Kat Painting):

"The most common interior painting mistake I see in residential properties is applying the same sheen to every surface. The ceiling, the walls, and the trims all need different products. When they are all painted with the same thing, the result looks uniform at first and wrong within a month, once the light hits them differently at different times of day."

Interior Painting for Commercial Properties

Commercial painters work in a fundamentally different context to residential painting contractors. The properties are larger, the surfaces are used more heavily, the scheduling constraints are more complex, and the paint systems required are specified to a higher performance standard. Understanding these differences is useful whether you are a business owner planning a fit-out or a facilities manager overseeing a building repaint.

Paint Systems for Commercial Interiors

Standard residential interior wall paint is not the correct product for most commercial environments. Offices, retail stores, medical facilities, and strata common areas require washable, high-durability systems that hold up under frequent cleaning with commercial-grade products. In childcare and healthcare settings, zero-VOC formulations are specified to maintain acceptable air quality throughout the space. In warehouses and industrial interiors, coatings must resist abrasion and, in some cases, chemical exposure. Dulux and Taubmans both produce commercial-grade interior paint ranges designed specifically for these conditions.

Scheduling Around Operating Businesses

The practical challenge of commercial interior painting is not the painting itself; it is the scheduling. Businesses cannot simply vacate their premises for a week while a painting project is completed. Professional commercial painters plan every job around the operating requirements of the business: after-hours work for offices, overnight completion for retail tenancies, room-by-room staging for medical facilities. The result is a space repainted without any day of trading lost. Our commercial painting service covers all interior commercial work, with after-hours and weekend scheduling available as standard.

Consistency Across Large Surfaces

A residential wall that reads slightly inconsistent under certain light is a minor defect. The same inconsistency across a 300-square-metre open-plan office is a significant quality failure. Commercial interior painting requires a higher standard of application discipline — consistent roller pressure, correct wet-edge management to avoid lap lines, and careful colour batch matching across large surface areas. These are skills that come from volume of commercial work, not residential experience alone.

Surface Preparation: Why It Decides Everything

The Australian Paint Manufacturers' Federation identifies inadequate surface preparation as the primary cause of premature interior paint failure ahead of product quality, application method, and number of coats. This finding applies equally to residential painting and commercial interior painting services. A paint system applied to a correctly prepared surface will last. The same system applied to an unprepared one will not.

Surface Condition

What Correct Preparation Looks Like

What Happens Without It

Cracks in walls or ceilings

Filled with flexible compound, sanded, and spot primed

Cracks reappear through the topcoat within one season

Mould on bathroom or laundry walls

Chemical treatment is applied and dried before painting

Mould returns through the topcoat within weeks

Water stains or smoke marks

Stain-blocking primer applied before topcoat

Stains bleed through multiple topcoats

Bare or repaired plaster

Full primer coat before topcoat

Patchy sheen and uneven colour across the surface

Chalking or flaking existing paint

Surface stabilised and primed before repainting

New paint fails to bond peels within months

Choosing the Right Interior Painting Contractor

The residential and commercial painting market includes contractors of widely varying quality. When evaluating interior painting services, whether for a home or a business, the following indicators distinguish professional operators from those likely to cut corners.

• Written, itemised quote: Every surface listed, with the exact paint product, sheen level, number of coats, and preparation detail for each. Verbal estimates and vague scopes are not sufficient.

• Product specification: The quote names the brand and product not 'quality paint.' For commercial work, the VOC rating and washability specification should also be stated.

• Licensing and insurance: Any painting contractor operating in Australia should be registered with the relevant state building authority and carry public liability insurance on all projects.

• Commercial scheduling capability: For business properties, confirm that the contractor has genuine after-hours and weekend scheduling experience, not just an offer to work late if required.

• Workmanship guarantee: A guarantee that covers preparation failures and delamination, not just a promise to return if something looks wrong in the first week.

Also Read: Top Kat Painting

Frequently Asked Questions

What surfaces does interior painting cover?

Interior painting covers walls, ceilings, doors, trims, skirting boards, and architraves in residential properties. In commercial properties, the scope extends to include feature surfaces, stairwells, common areas, and, in some cases, industrial floor coatings. The exact scope is detailed in a written quote before work begins.

How is residential painting different from commercial interior painting?

Residential painting uses standard domestic paint systems and is scheduled around the homeowner. Commercial painters specify higher-durability, washable products suited to frequent cleaning and heavy use, and schedule work to avoid disrupting business operations including after-hours and weekend availability.

How long does an interior painting project take?

A full interior repaint of a three to four-bedroom home takes five to seven days with a professional crew. A commercial office of 200 to 400 square metres takes two to four days. Timeline depends on surface area, surface condition, and the number of coats specified and is confirmed in the written quote before work begins.

What is the best interior wall paint for a rental property?

A washable low-sheen or eggshell acrylic on walls a finish that can be wiped clean between tenancies without losing its appearance. Semi-gloss on all doors, trims, and skirting boards for durability. These choices extend the usable life of the paint job between tenancies and reduce the frequency of full repaints.

Do commercial painters need to use low-VOC products?

In occupied commercial spaces, low-VOC or zero-VOC products are strongly recommended and in healthcare and childcare settings, they are effectively required. Lower VOC content reduces odour during application and allows spaces to be reoccupied sooner after painting is complete.

How do I know if my interior walls need repainting?

Interior indicators include paint that has yellowed, surfaces that mark or scuff easily and do not clean without leaving a trace, visible staining that has been painted over rather than properly primed, and cracks or patches that have been filled but not refinished to a consistent level. In commercial properties, fading and sheen loss from frequent cleaning are the most common triggers.

[topkatpainting2]

Interior Painting: What Residential and Commercial Properties Both Get Wrong

Key Takeaways

Interior painting covers every painted surface inside a property, walls, ceilings, doors, trims, and feature walls, each requiring a specific product and sheen level.

Surface preparation is the stage that determines how long the finish lasts in both residential and commercial painting projects.

Commercial painters work to different product specifications, scheduling requirements, and consistency standards than residential painting contractors.

Interior painting looks straightforward from the outside. Pick a colour, apply the paint, done. In practice, the majority of interior painting projects that fail are those that peel, colours that read wrong, and sheen levels that age poorly, because of decisions made before the brush touched the wall. Whether the property is a home or a commercial space, the principle is the same: interior painting done correctly starts with preparation and product specification, not colour selection. This guide covers what both residential and commercial clients need to understand before starting a project.

What Interior Painting Actually Covers

Interior painting covers every painted surface inside a building. The scope varies between residential and commercial properties, but the standards for preparation, product selection, and application do not.

Residential Interior Painting

In a home, residential painting covers walls, ceilings, doors, trims, skirting boards, and architraves. It may also include feature walls, stairwells, and in older properties, decorative cornices and picture rails. Each surface requires a specific paint type and sheen level suited to its function. A bedroom wall and a bathroom wall are not the same surface from a specification perspective even if they look similar. For a full breakdown of what our residential painting service covers, see the dedicated page.

Commercial Interior Painting

Commercial painters work across a wider range of interior environments, including offices, retail stores, medical centres, warehouses, strata common areas, and childcare facilities. The brief for commercial painting differs from residential work in three key ways: paint systems must perform under heavier use and more frequent cleaning, scheduling must accommodate operating businesses, and the scope typically involves larger surface areas with tighter consistency requirements.

Surfaces That Are Commonly Missed

• Eaves and soffits: Frequently excluded from interior and exterior repaint scopes to reduce cost, but among the first surfaces to show breakdown.

• Window reveals and sills: High-exposure surfaces that take direct light and moisture, affecting both waterproofing and appearance over time.

• Feature walls: A single interior wall in a contrasting colour or finish can reframe an entire room without repainting everything.

• Stairwells and hallways: High-traffic surfaces that require more durable paint systems than living room walls, often painted with the same product, which is incorrect.

Surface Preparation The Stage Most Interior Painting Projects Get Wrong

According to the Australian Paint Manufacturers' Federation, inadequate surface preparation is the leading cause of premature interior paint failure. This applies equally to residential painting and commercial interior painting projects. The paint system is secondary to the surface it is applied to.

What Correct Preparation Involves

• Filling: Cracks and holes are filled with a compound matched to the substrate flexible filler for surfaces subject to movement, rigid compound for stable areas.

• Sanding: Filled areas are sanded smooth before primer or topcoat is applied. Unsanded repairs read through the topcoat as visible patches.

• Priming: Bare, repaired, or stained surfaces require primer before topcoat. Without it, topcoats fail to bond correctly, and the finish degrades faster than expected.

• Stain blocking: Water stains, smoke marks, and tannin bleed require stain-blocking primer. Without it, marks bleed through multiple coats regardless of paint quality.

• Mould treatment: Mould must be chemically treated before painting. Painting over active mould without treatment delays its return by weeks, not permanently.

Frank's Note (Top Kat Painting):

"When an interior painting quote is significantly lower than others, the saving is almost always in the preparation stage. Fewer coats, skipped priming, no stain blocking, these shortcuts are invisible at quoting time and visible within a year of completion. The preparation is the job. The painting is the last part."

Paint Sheen: The Variable That Changes Everything

Sheen level is as important as colour in any interior painting project. It determines how a surface looks under light, how durable it is in use, and how easy it is to clean. Applying the same sheen across every interior surface is a shortcut that affects both appearance and longevity.

Surface

Correct Sheen

Reason

Ceilings

Flat / Matte

No reflectivity hides imperfections

Bedroom and living room walls

Low Sheen

Clean finish, lightly wipeable

Hallways and family rooms

Eggshell

More durable, easy to clean

Kitchens and bathrooms

Satin

Moisture-resistant, wipes clean

Doors, trims, skirting boards

Semi-Gloss

Hard and durable handles daily contact

Commercial high-traffic walls

Eggshell or Satin

Washable holds up under repeated cleaning

For commercial painters, sheen selection has an additional dimension, washability. Surfaces in commercial environments are cleaned far more frequently and with stronger products than residential interiors. A finish that cannot withstand this without marking or dulling will need repainting sooner, increasing the long-term cost of the project.

Residential Painting vs Commercial Interior Painting Key Differences

Both residential painting and commercial interior painting involve the same core disciplines: preparation, priming, and application. But the specific requirements differ in ways that affect product selection, scheduling, and approach.

Product Requirements

Residential interior painting services use standard or low-VOC acrylic products suited to domestic use. Commercial interior spaces require higher-durability and higher-washability systems. In medical facilities and childcare centres, zero-VOC products are specified as standard. In warehouses, coatings must resist abrasion and, in some cases, chemical exposure.

Scheduling

Residential painting projects are scheduled around the homeowner's availability. Commercial painters must plan around the operating requirements of the business, completing work after hours, in stages, or within specific vacancy windows. An interior painting project in an occupied office that is not scheduled correctly will either disrupt the business or produce work completed under inadequate conditions.

Scale and Consistency

Commercial interior painting projects involve larger surface areas and stricter consistency requirements. Colour variation, sheen inconsistency, and visible lap lines that might pass unnoticed on a residential wall become significant quality failures on a 200-square-metre office fit-out. Professional commercial painters apply additional quality control measures to maintain consistency across large surfaces.

Interior Wall Paint Choosing the Right Product

Dulux and Taubmans produce interior wall paint systems formulated for Australian conditions, including low-VOC and zero-VOC options, washable acrylic ranges for commercial use, and specialty products for high-moisture areas. The specific product for an interior painting project depends on:

• The substrate: Plasterboard, solid plaster, previously painted surfaces, and new render all respond differently to primer and topcoat systems.

• The room's function: A bathroom requires a moisture-resistant system. A childcare centre requires zero-VOC. A corporate office requires a washable finish rated for commercial cleaning.

• The existing surface condition: Surfaces with staining, mould history, or significant crack repair require specific primer products before any topcoat is applied.

A professional interior painting quote specifies the exact product for each surface brand, product name, and sheen level. A quote that references 'quality paint' without specifics is not a specification. It is a placeholder.

Frequently Asked Questions

What is the difference between residential and commercial interior painting?

Residential painting focuses on homes' domestic surfaces, standard paint systems, and scheduling around the homeowner. Commercial painters work with higher-durability products, stricter consistency requirements across large surface areas, and scheduling that accommodates operating businesses including after-hours and weekend work.

How long does an interior painting project take?

A full interior repaint of a three to four-bedroom home typically takes five to seven days. A standard open-plan commercial office of 200 to 400 square metres takes two to four days with a professional crew. Timeline depends on surface area, preparation requirements, and the number of coats specified.

What interior wall paint is best for high-traffic areas?

Eggshell or satin finish suits most high-traffic residential areas hallways, family rooms, and children's bedrooms. For commercial interiors with frequent cleaning requirements, a washable low-sheen or satin formulation rated for commercial use is the correct specification. Dulux Wash and Wear and similar commercial-grade products are designed specifically for this purpose.

Do commercial painters work outside business hours?

Yes. After-hours and weekend scheduling is standard practice for commercial interior painting projects where the business needs to remain operational. Work is typically completed overnight or across weekends, with the space ready for normal use by the following business day.

Should I use the same paint for all interior surfaces?

No. Walls, ceilings, doors, trims, and wet area surfaces each require a different sheen level and, in some cases a different formulation. Applying a single product across all interior surfaces is a shortcut that affects both the appearance and the longevity of the finish.

What preparation is needed before interior painting?

At minimum: filling of all cracks and holes, sanding of repaired areas, priming of bare or stained surfaces, and mould treatment where active mould is present. The specific preparation required depends on the surface condition, which a professional painter assesses before quoting.

How do I know if an interior painting quote is thorough?

A professional interior painting quote specifies every surface to be painted, the exact paint product and sheen for each surface, the number of coats, the preparation included, the timeline, and a workmanship guarantee. Any quote that lacks these details is incomplete.

[topkatpainting2]

Residential Painting Services: The Complete Guide for Homeowners

Most homeowners think about residential painting services the wrong way. They focus on the colour first, the painter second, and the preparation last, when the correct order is almost exactly the reverse. A residential painting project that starts with the right surface preparation and the right paint specification will look good and last. One that skips those steps will fade, crack, or peel regardless of how carefully the topcoat was applied. This guide covers what homeowners should know before engaging professional painters so they can evaluate a quote, understand the process, and recognise quality work when they see it.

The Scope of Residential Painting: What It Actually Covers

A complete residential home-painting service covers far more than just walls. The full scope of a properly executed painting project includes the following.

Interior Surfaces

Residential interior painting covers walls, ceilings, doors, trims, skirting boards, architraves, and in character properties ornate cornices and picture rails. Each surface requires a different paint formulation and sheen level. Applying the same product to every interior surface is a shortcut that affects both the appearance and the durability of the finish.

Exterior Surfaces

Residential exterior house painting covers rendered facades, brick, weatherboard cladding, eaves, fascias, soffits, window reveals, and rooflines. The critical difference between interior and exterior painting is product specification. Exterior surfaces face UV radiation, heat, wind, and moisture conditions that require paint systems tested and rated for outdoor exposure. The same acrylic used on an interior wall will fail rapidly on an exterior surface in Australian conditions.

Surfaces That Are Commonly Overlooked

• Eaves and soffits: Visible from the street and often the first surface to show paint breakdown, but frequently excluded from repaint scopes to reduce cost.

• Window reveals and sills: High-exposure surfaces that take direct sun and moisture. Deterioration here affects both waterproofing and appearance.

• Garage doors: Often painted in a previous colour that no longer suits the updated exterior. A fresh coat of the correct exterior system makes a significant visual difference.

• Feature walls: A single interior wall in a contrasting colour or finish can reframe an entire room without repainting everything.

Surface Preparation: The Stage That Determines the Outcome

Surface preparation is the most important stage of any painting project and the most commonly underestimated. According to the Australian Paint Manufacturers' Federation, inadequate preparation is responsible for the majority of premature residential paint failures. The paint itself is secondary to the surface it is applied to.

What Correct Preparation Involves

• Cleaning: Exterior surfaces are pressure-washed to remove dirt, chalk, mould spores, and contaminants that prevent paint adhesion. Interior surfaces are wiped down and degreased where required.

• Crack and hole filling: Using appropriate filler compounds matched to the substrate, flexible fillers for surfaces subject to movement, and rigid compounds for stable areas.

• Sanding: To achieve a smooth, uniform surface and improve adhesion of the primer and topcoat system.

• Priming: Bare, repaired, or stained surfaces require primer before topcoat. Priming is not optional it is the adhesion layer that holds the topcoat to the substrate.

• Mould and stain treatment: Mould must be chemically treated before painting. Painting over active mould delays its return by weeks. Stains, water marks, smoke, and tannin bleed from timber require stain-blocking primer, or they will bleed through multiple topcoats.

Frank's Note (Top Kat Painting):

"Homeowners sometimes ask why a professional quote is higher than they expected. The answer is almost always preparation. A painter who quotes low is cutting the preparation stage and that decision shows up in the finish within a year. The preparation is the job. The painting is the last part."

Paint Sheen: Why It Matters as Much as Colour

Sheen level is the most misunderstood variable in residential home painting. Most homeowners focus on colour selection and treat sheen as a detail but sheen determines how a surface performs in use, how it reads under different lighting conditions, and how easy it is to clean and maintain.

• Flat / Matte: Absorbs light, hides surface imperfections. Standard for ceilings. Not suitable for surfaces that require regular cleaning.

• Low Sheen: Slight reflectivity. The standard choice for most residential interior walls presents a clean finish without drawing attention to surface variation.

• Eggshell / Satin: More durable than low sheen, wipeable, moisture-resistant. Correct for kitchens, bathrooms, hallways, and family rooms.

• Semi-Gloss: Hard, durable finish for surfaces in daily contact doors, trims, skirting boards, and window frames. Cleans without marking.

• Gloss: Maximum sheen and hardness. Used on feature trims, specific architectural details, and surfaces requiring the highest durability.

Applying a flat finish to a bathroom wall or a low-sheen product to door trims are common mistakes that affect both the look and the longevity of the result. A professional painting service specifies the correct sheen for each surface before work begins.

Residential Interior vs Exterior Painting Key Differences

Residential interior painting and exterior painting are different disciplines, not just different locations. The products, preparation methods, application conditions, and performance requirements differ significantly between the two.

Product Formulation

Interior paint is formulated for indoor air quality, low odour, and ease of cleaning. Exterior paint contains UV stabilisers, mould inhibitors, and flexibility agents that allow the coating to expand and contract with temperature variation without cracking. Using interior paint on exterior surfaces, or vice versa, produces a result that fails well before its expected lifespan.

Application Conditions

Residential exterior house painting is affected by temperature, humidity, and UV intensity in ways that interior work is not. Paint applied in extreme heat dries too quickly, causing application marks and poor adhesion. Paint applied before rain or over damp surfaces fails to bond. Professional painting contractors schedule exterior work around these conditions and monitor forecasts during the project.

Preparation Intensity

Exterior surfaces face more aggressive conditions than interior ones and therefore require more intensive preparation. Pressure washing, sealing of chalking surfaces, and full-coverage priming are standard on exterior jobs, not optional steps applied only where conditions are obviously poor.

How to Evaluate a Residential Painting Quote

The quality of a painting contractor's quote is one of the most reliable indicators of the quality of the work they will deliver. A professional quote for residential painting services should include the following.

• Written scope: Every surface to be painted, listed explicitly. Vague descriptions like 'interior walls' without room-by-room detail leave room for dispute at completion.

• Product specification: The exact paint brand, product name, and sheen level for each surface. A quote that references 'quality paint' without specifics is not a professional document.

• Number of coats: Stated per surface. A single-coat interior job on previously painted walls may be acceptable in limited circumstances a single-coat exterior job rarely is.

• Preparation detail: What preparation is included crack filling, priming, sanding and what is excluded. This is where savings are hidden in low quotes.

• Timeline: A proposed schedule that accounts for preparation, painting, drying time between coats, and final inspection.

• Workmanship guarantee: Coverage period and what it applies to preparation failures, delamination, and sheen inconsistency.

Frequently Asked Questions

What is included in a residential painting service?

A complete residential painting service includes surface assessment, preparation, filling, sanding, priming and application of the correct paint system to each surface. Interior services cover walls, ceilings, doors, and trims. Exterior services cover facades, render, brick, eaves, and fascias. The exact scope is detailed in a written quote before work begins.

How do I know when my home needs repainting?

On the exterior, run your hand across the render or wall surface. Powdery residue that comes off on your palm indicates that the surface needs repainting. Other signs include visible cracking at mortar lines or window reveals, peeling at eaves and fascias, and colour fading that reads unevenly across different elevations. Interior signs include yellowing, surfaces that mark easily and do not clean well, and visible staining or cracking that has been painted over rather than properly repaired.

What is the difference between residential and commercial painting?

Residential home painting focuses on homes and the specific surface types, preparation methods, and finishes suited to domestic properties. Commercial painting involves larger surface areas, different product requirements, industrial floor coatings, washable wall systems rated for heavy use and more complex scheduling requirements around operating businesses. The skills overlap, but the specification and project management approach differ significantly.

How long does residential house painting last?

A correctly prepared and applied exterior paint system lasts eight to twelve years under typical Australian conditions. Interior paint in living areas and bedrooms lasts longer. High-traffic areas, such as hallways, kitchens, and children's rooms, may need attention sooner, particularly if a low-durability sheen was used. Budget products on inadequately prepared surfaces typically fail within three to five years.

Is it worth hiring professional painters for a small job?

Yes, particularly where surface preparation is required. Small jobs involving bathroom repaints, feature walls in new colours, or kitchen ceiling refreshes all benefit from correct primer selection, appropriate sheen, and a properly finished edge. The size of the job does not change the importance of doing it correctly.

What should I do before painters arrive?

Clear loose items from shelves, move small furniture away from walls, and protect or relocate items that cannot be covered. Most professional painting services cover floors and large furniture with drop sheets, but the more accessible the space, the more efficiently the preparation and painting stages can proceed.

[topkatpainting2]

Residential Painting Services: What Every Homeowner Should Know

Key Takeaways

Residential painting services cover interior and exterior surfaces of a home, walls, ceilings, trims, doors, facades, eaves, and roofs.

Surface preparation is the most critical stage of any painting project it determines how long the finish holds.

Choosing the right paint sheen for each surface is as important as choosing the right colour.

Professional painters deliver results that last significantly longer than DIY attempts, primarily because of preparation quality and product specification.

A residential painting project is one of the most effective ways to change how a home looks and feels. Done well, it protects surfaces from the elements, adds years to the life of timber and render, and transforms the interior atmosphere of every room. Done poorly, it creates maintenance problems within months. The difference between the two almost always comes down to the same two factors: preparation and product selection. This guide covers what homeowners should understand before engaging a painting company so they can ask the right questions, read a quote intelligently, and know what a quality result looks like.

What Residential Painting Services Cover

The scope of a residential painting service varies depending on what the homeowner needs, but a full home painting project typically covers the following surfaces.

Interior Painting

Interior house painting covers walls, ceilings, doors, trims, skirting boards, and architraves. Each surface requires a different sheen level and, in some cases, a different paint formulation. Walls and ceilings in living areas typically use a low-sheen acrylic. Kitchens and bathrooms benefit from a satin or semi-gloss finish that resists moisture and cleans easily. Doors and skirting boards require a harder-wearing semi-gloss that holds up under daily contact.

Exterior Painting

Exterior home painting covers rendered facades, brick, weatherboard, eaves, fascias, soffits, window reveals, and, where required, roofs and gutters. The primary difference between interior and exterior painting is product specification. Exterior paint systems must resist UV radiation, temperature variation, and moisture. In Australia's climate, this is not a minor consideration UV exposure accelerates paint breakdown significantly, and the wrong product on an exterior surface will fail within a few years, regardless of how well it was applied.

Surface Preparation Why It Decides Everything

Every experienced painting contractor will tell you the same thing: the paint itself is secondary. What happens before the brush or roller touches the surface determines how long the finish lasts and how it looks over time. According to the Australian Paint Manufacturers' Federation, inadequate surface preparation is the leading cause of premature paint failure in residential properties, responsible for the majority of cases involving peeling, bubbling, and uneven sheen.

Surface Condition

Correct Preparation

What Happens Without It

Chalking exterior render

Penetrating sealer before primer

New paint fails to bond and peels within months

Cracks at mortar lines

Flexible filler, sand, spot prime

Cracks reappear through the topcoat within a season

Mould on bathroom walls

Chemical treatment, not paint-over

Mould returns through the topcoat within weeks

Bare or repaired plaster

Primer coat before topcoat

Patchy sheen, uneven colour, visible repairs

Stains on interior walls

Stain-blocking primer

Stains bleed through multiple topcoats

Frank's Note (Top Kat Painting):

"Preparation takes longer than painting in most residential projects. That is the part of a quote that distinguishes a professional painter from someone cutting corners on time. If a quote seems unusually low, the preparation stage is almost always where the savings are being made, and the homeowner pays for it later."

Choosing the Right Paint Sheen, Product, and Colour

Understanding Paint Sheen Levels

Sheen level is one of the most misunderstood aspects of residential painters' work. Most homeowners focus on colour, but the finish level determines how a surface performs in use, how it reads under light, and how easy it is to maintain.

Sheen Level

Best For

Why

Flat / Matte

Ceilings

Hides surface imperfections, no light reflection

Low Sheen

Bedroom and living room walls

Soft finish, lightly wipeable

Eggshell

Hallways, family areas

More durable than low sheen, easy to clean

Satin

Kitchens, bathrooms, laundries

Moisture-resistant, wipes clean easily

Semi-Gloss

Doors, trims, skirting boards

Hard, durable finish for high-contact surfaces

Gloss

Feature trims, specific detail work

Maximum durability and sheen

Paint Product Quality

Not all paint products perform equally. A quality home painting job uses products from manufacturers with independently tested formulations, brands like Dulux and Taubmans, whose exterior and interior ranges are formulated for Australian conditions. Budget-grade products may look similar on application, but typically break down faster, require repainting sooner, and cost more over time than a quality product applied correctly in the first instance.

Colour Selection

Colour selection is where many homeowners feel uncertain, and with good reason. A colour that reads beautifully on a sample chip can shift significantly once it covers a full wall under real lighting conditions. Natural light, room orientation, ceiling height, and existing fixtures all affect how a colour reads. Reputable residential painters include colour advice as part of the quoting process, and sampling on the actual wall before full application is always the correct approach.

Professional Painters vs DIY: The Real Difference

The decision to hire professional painters rather than complete a painting project independently comes down to three practical factors: preparation quality, product access, and time.

• Preparation quality: Professional painting contractors have the tools, products, and experience to prepare surfaces correctly. Most DIY attempts underestimate this stage, which is where the finish fails.

• Product access and specification: Trade painters have access to products and systems not available in retail quantities. They also know which product to use on which substrate, knowledge that takes years to develop.

• Time: A painting project that a professional crew completes in five days typically takes a homeowner three to four weekends with disruption to daily life throughout, and a result that rarely matches a professional finish.

• Longevity: A professionally prepared and applied paint job on a residential property typically lasts eight to twelve years. A DIY result on an inadequately prepared surface commonly requires attention within three to five years.

What to Look for When Choosing a Painting Company

The residential painting market includes contractors of widely varying quality. When evaluating a painting company for a home painting project, the following indicators reliably distinguish professional operators from those likely to cut corners.

• Written quotes: A professional painting contractor quotes in writing with an itemised scope of surfaces, products, number of coats, and total cost. Verbal estimates are not sufficient.

• Licensing and insurance: Painters operating in Australia should be registered with the relevant state building authority and carry public liability insurance. Confirm both before engaging.

• Paint product specification: A credible house painting quote will specify the exact products to be used on each surface. Vague references to 'quality paint' without brand and product detail are a warning sign.

• Workmanship guarantee: Reputable residential painters stand behind their work. A guarantee that covers defects in preparation and application gives homeowners recourse if the finish fails prematurely.

• References and completed work: Ask for examples of comparable residential painting projects, exterior repaints, character homes, or the specific surface type relevant to the job.

Frequently Asked Questions

What does a residential painting service include?

A complete residential painting service covers surface preparation, filling, sanding, priming and application of the correct paint system to each surface. Interior services cover walls, ceilings, trims, and doors. Exterior services cover facades, render, brick, eaves, fascias, and window reveals. The specific scope depends on the property and is detailed in a written quote before work begins.

How do I know if my home needs repainting?

Exterior indicators include chalking render, a powdery surface that comes off on your hand, visible cracking at mortar lines or window reveals, and fading that reads unevenly across different elevations. Interior indicators include paint that has yellowed, surfaces that no longer clean without marking, and visible staining or cracking that has been painted over rather than repaired.

How long does a residential painting project take?

Interior repaints of a three to four-bedroom home typically take five to seven days with a professional crew. Exterior repaints take three to six days. Combined interior and exterior projects run eight to twelve days, depending on surface area, condition, and preparation requirements.

What paint sheen should I use on my walls?

Low sheen for most living areas and bedrooms. Eggshell or satin for hallways, family rooms, and wet areas. Semi-gloss for doors, trims, and skirting boards. Flat finish for ceilings. The correct sheen for each surface balances appearance with practical durability for that room's use pattern.

How long should a professional paint job last?

A correctly prepared and applied exterior paint system should hold its appearance for eight to twelve years under normal Australian conditions. Interior paint in low-traffic areas lasts longer. High-traffic interior surfaces, such as hallways, children's rooms, kitchens, may need attention sooner depending on the finish used and the cleaning regime.

What questions should I ask a painting contractor before hiring?

Ask for a written, itemised quote. Ask which specific paint products will be used on each surface. Ask what the preparation process involves for your particular surfaces. Ask whether they carry public liability insurance and can confirm their licensing. Ask for examples of comparable residential painting work they have completed.

[topkatpainting2]

Residential Painters Perth Home Painting Experts 

A home repaint is one of the most visible improvements a homeowner can make and one of the most lasting, when the work is done correctly. Residential painting in Perth involves more than applying fresh colour. Every surface, from rendered facades to interior trims, requires a specific preparation method and paint system suited to the substrate and its exposure conditions. Top Kat Painting provides residential painting services across Perth's northern suburbs, with every job quoted in writing and backed by a workmanship guarantee.

Key Takeaways

Residential painting services in Perth cover interior rooms, exterior facades, feature walls, roofs, gutters, and full home repaints.

The quality of surface preparation, not the paint itself, is the primary factor in how long a residential repaint lasts.

Top Kat Painting serves homeowners across Bayswater, Morley, Maylands, Bedford, and surrounding Perth suburbs with free written quotes.

Residential Painting Services We Provide

A complete residential painting service covers every paintable surface on a property. The table below outlines what each service includes.

Service

What Is Included

Interior house painting

Walls, ceilings, trims, doors, skirting boards — all room types

Exterior house painting

Facades, render, brick, eaves, fascias — two-coat system minimum

Feature wall painting

Accent colours, textured and decorative finishes as a focal point

Full home repaint

Complete interior and exterior handled in a single project

Roof painting

Tiles, iron, and Colorbond roof restoration and recoating

Brick house painting

Penetrating primer and quality masonry topcoat for exposed brick

Gutter and fascia painting

Rust treatment, priming, and exterior-grade topcoat

New build painting

First-coat painting for newly constructed homes — all surfaces

Interior House Painting in Perth

The interior of a home is in daily contact with the people who live there. Paint in these spaces needs to look right and perform under regular cleaning, handling, and the movement that comes with a lived-in property. Our interior painting service covers every surface inside your home, with the correct sheen specified for each area.

• Walls and ceilings: Low-sheen acrylic for living areas and bedrooms. Flat finish for ceilings. Smooth, even coverage with a minimum of two topcoats over a prepared surface.

• Trims, doors, and skirting boards: Semi-gloss finish for durability and ease of cleaning. Precise cut-in work at all edges and junctions.

• Kitchens and bathrooms: Moisture-resistant coatings in satin finish, suited to wet areas and regular cleaning with household products.

• Feature walls: Accent colours or decorative finishes applied to a single wall to create a deliberate focal point in a room.

Frank's Note:

"Every interior job begins with surface preparation — filling cracks, sanding back rough areas, and priming bare or stained patches. That step takes longer than most homeowners expect, and it is the reason a professional finish lasts ten years rather than two."

Exterior House Painting in Perth

Perth's UV intensity places significant demands on exterior paint systems. A quality exterior repaint is not simply a new coat applied over an existing chalking or cracking finish — it requires thorough preparation, appropriate priming, and a UV-resistant topcoat suited to the specific substrate. Our exterior painting service includes pressure washing, crack filling, full priming, and a minimum two-coat topcoat system on every job.

• Rendered facades: Penetrating primer followed by a UV-resistant acrylic topcoat — the correct system for WA's direct sun exposure.

• Brick house painting: Breathable, penetrating primer prevents moisture trapping within the masonry — a common cause of bubbling and delamination.

• Roof painting: Tile, iron, and Colorbond surfaces restored and recoated using products rated for the substrate and heat exposure.

• Gutters and fascias: Rust treatment where required, followed by priming and an exterior-grade topcoat that holds up to sun and moisture.

According to the Australian Paint Manufacturers' Federation, inadequate surface preparation is the leading cause of premature paint failure on residential exteriors in Australia. Every Top Kat Painting exterior job addresses preparation before a topcoat product is selected.

Why Perth Homeowners Choose Top Kat Painting

• Licensed and insured: Registered with the WA Building Commission. Full public liability insurance on every job.

• Written quotes: Every quote itemises materials, labour, paint specification, and timeline. No verbal estimates, no hidden costs.

• Quality paint systems: Dulux and Taubmans products used across all residential jobs — specified for Perth's climate, not selected on price.

• Free colour consultation: Included with every quote at no extra charge. Practical advice on how colours will read in your home's specific lighting conditions.

• Workmanship guarantee: Every job is inspected before handover. If something is not right, it is attended to before we leave.

• Local experience: 15+ years painting homes across Bayswater, Morley, Maylands, Bedford, and surrounding Perth suburbs.

Frequently Asked Questions

How long does a residential repaint take in Perth?

A full interior repaint of a three to four-bedroom home takes approximately five to seven days for a professional crew. Exterior repaints take three to six days. Full home repaints, interior and exterior combined, typically run eight to twelve days depending on size, surface condition, and preparation requirements.

Do I need to move furniture before painters arrive?

We ask that loose items be cleared from shelves and that small furniture is moved away from walls where possible. Large items such as sofas, beds, and wardrobes are protected with drop sheets in place. The more accessible the space, the less time is spent on protection and the more on painting.

What paint do you use on Perth homes?

We use Dulux and Taubmans products across all residential jobs — interior and exterior. Product selection depends on the surface and its exposure conditions. All specifications are listed in the written quote before work begins.

Do you paint new builds as well as repaints?

Yes. New build painting requires different preparation and primer systems compared to repaints. Bare plaster and render are more porous and typically require additional primer coats before the topcoat is applied. We handle new build painting across Perth's northern suburbs and surrounding areas.

[topkatpainting2]

Commercial Painters Perth: How to Keep Your Business Looking Professional Without Disrupting Operations

When clients walk into your business premises, the condition of the property immediately shapes their perception of your company. Peeling paint, faded walls, stained ceilings, or weathered exteriors can make even a well-run business appear neglected. On the other hand, a clean and professionally painted commercial space creates confidence, improves staff morale, and strengthens your brand image.

That is why more businesses are investing in professional commercial painting services in Perth not just for appearance, but for long-term property maintenance and operational efficiency.

Whether you manage an office, retail store, warehouse, medical centre, or strata property, choosing the right commercial painters can make the entire process smooth, efficient, and disruption-free.

Why Commercial Painting Matters for Businesses

Commercial buildings experience constant wear and tear. Interior walls deal with daily foot traffic, cleaning products, furniture movement, and general use, while exterior surfaces face Perth’s harsh UV exposure, heat, rain, and wind throughout the year.

Without proper preparation and high-quality coatings, paint systems begin to:

Fade under UV exposure

Peel or blister

Scuff easily

Absorb stains

Crack due to temperature movement

Require repainting sooner than expected

A professional commercial painting service ensures surfaces are properly prepared, coated with the right products, and finished to withstand the specific demands of the environment.

Interior Commercial Painting Services

Interior commercial painting is not simply about changing colours. Different businesses require different paint systems depending on hygiene standards, traffic levels, and maintenance requirements.

Offices and Corporate Spaces

Modern offices need finishes that look professional while remaining durable enough for daily use. Reception areas, boardrooms, workstations, and shared spaces all benefit from clean finishes that create a polished working environment.

Professional painters also schedule office painting after hours or on weekends to minimise disruption to staff and productivity.

Retail Stores and Showrooms

Retail environments rely heavily on presentation. Poor paintwork distracts customers and negatively affects the shopping experience.

Commercial painters help retail businesses maintain:

Crisp wall finishes

Consistent branding colours

Clean feature walls

Professional storefront presentation

Most retail painting work can be completed overnight or during non-trading hours to avoid interrupting sales.

Medical Centres and Childcare Facilities

Healthcare and childcare facilities require specialised coatings that prioritise hygiene and occupant safety.

Low-VOC and washable paint systems are commonly used because they:

Reduce strong odours

Improve indoor air quality

Allow quicker reoccupation

Support regular cleaning and sanitation

Painting is often completed in stages so businesses can continue operating during the project.

Warehouses and Industrial Interiors

Industrial environments demand hard-wearing coatings that can tolerate:

Heavy foot traffic

Equipment movement

Temperature fluctuations

Impact damage

Frequent cleaning

Correct surface preparation and product selection are critical for long-term durability in these spaces.

Strata and Common Areas

Shared commercial and residential properties need consistent finishes across:

Corridors

Stairwells

Lobbies

Entry points

Car parks

Commercial painters coordinate projects carefully to minimise inconvenience for tenants and visitors.

Exterior Commercial Painting

Exterior commercial painting plays a major role in protecting buildings against Perth’s climate conditions.

Western Australia experiences some of the harshest UV exposure in the country, which is one of the leading causes of premature paint failure. Inferior products or poor preparation can result in chalking, fading, cracking, and peeling within only a few years.

Professional commercial painters use exterior systems specifically designed for Australian conditions to ensure long-lasting performance.

Common Exterior Surfaces We Paint

Rendered and Masonry Facades

These surfaces require:

Penetrating sealers

High-quality primers

UV-resistant topcoats

Correct preparation prevents moisture penetration and early paint breakdown.

Cladding and Panel Systems

Commercial cladding expands and contracts due to temperature changes. Flexible coating systems are used to reduce cracking and delamination.

Eaves, Fascias, and Soffits

These areas are highly visible from the street and significantly impact the overall appearance of the property.

Car Parks and Line Marking

Durable floor coatings and fresh line marking improve:

Safety

Traffic flow

Professional presentation

Multi-Storey Buildings

Large commercial projects often require:

Scaffolding

Elevated work platforms

Rope access coordination

Strict safety compliance

Experienced commercial painters manage these requirements while keeping projects on schedule.

Minimising Disruption to Your Business

One of the biggest concerns business owners have about commercial painting is operational downtime.

Professional commercial painters understand that businesses cannot simply shut down for days at a time. That is why scheduling flexibility is essential.

Safety and Compliance in Commercial Painting

Commercial painting projects involve more than just paint application. Professional contractors also manage:

Site safety assessments

Ventilation planning

Low-VOC product selection

Access equipment safety

Occupied-space compliance

These measures are especially important in workplaces that remain operational during painting.

How Long Does Commercial Painting Take?

Project timelines depend on:

Building size

Surface condition

Access requirements

Weather conditions

Number of painters on site

As a general guide:

Small office repaints may take 2–4 days

Retail projects are often completed overnight

Large exterior commercial repaints may take several weeks

Professional painters provide written schedules outlining each stage of the project before work begins.

Choosing the Right Commercial Painter in Perth

When comparing commercial painting contractors, businesses should look for:

Fully insured services

Written quotes

Clear timelines

Experience with commercial projects

Flexible scheduling

High-quality paint systems

Strong safety procedures

A professional contractor will also provide honest recommendations about surface preparation, paint systems, and long-term maintenance requirements.

Final Thoughts

Commercial painting is more than a cosmetic upgrade. It protects your property, strengthens your brand image, and helps maintain a professional environment for clients, staff, and visitors.

The key is working with experienced commercial painters who understand how to deliver high-quality finishes while keeping disruption to a minimum.

From offices and retail stores to warehouses and multi-storey buildings, properly planned commercial painting can dramatically improve both the appearance and longevity of your property.

[topkatpainting2]

Interior Commercial Painting Perth: Minimal Disruption, Maximum Finish

The interior condition of your commercial space communicates something to every person who walks through the door. Faded walls and an outdated colour scheme cost you more than you think.

Key Takeaways

Interior commercial painting in Perth covers offices, retail spaces, warehouses, medical centres, and strata buildings.

Professional commercial painters work around your trading hours to eliminate downtime and revenue loss.

Top Kat Painting provides written quotes, clear timelines, and fully insured services across Perth WA.

Why Does Commercial Painting Matter?

The interior condition of a commercial space communicates something to every person who walks through the door. Faded walls, scuffed trims, or an outdated colour scheme affect how clients perceive your business and how staff feel about the environment they work in.

Interior commercial painting in Perth is one of the most cost-effective investments a business can make, refreshing brand image and employee morale in one job. Top Kat Painting works around your schedule to keep disruption to an absolute minimum.

Commercial Spaces We Paint in Perth

Top Kat Painting provides interior commercial painting across a wide range of business types and property categories. Every job is managed with the same attention to surface preparation, finish quality, and scheduling.

Offices & Corporate Fit-outs

Reception areas, open-plan workspaces, boardrooms, and server rooms — the right system for every function.

Retail Stores & Showrooms

Colour-accurate, clean finishes that present products and brand environments at their best.

Medical & Healthcare

Low-VOC, washable paint systems that meet hygiene standards and minimise disruption.

Warehouses & Industrial

Durable, hard-wearing coatings suited to temperature variation, high traffic, and impact.

Strata & Body Corporate

Common areas, lobbies, stairwells, and car parks repainted to a consistent standard.

Schools & Childcare

Low-toxicity paint systems are applied outside of operating hours for safety and convenience.

Paint Systems Used in Commercial Interiors

Commercial interiors place different demands on paint than residential spaces. High foot traffic, cleaning chemicals, moisture exposure, and large surface areas all require specific systems. Every job is specified based on surface type, usage pattern, and regulatory requirements.

Frequently Asked Questions

How long does interior commercial painting take?

A standard open-plan office of 200 to 400 square metres typically takes two to four days with a crew of two to three painters. A detailed schedule is provided with every written quote so you can plan around the work.

Can commercial painting be done outside of business hours?

Yes. After-hours and weekend scheduling is standard practice for commercial painting jobs where the business needs to remain operational. Top Kat Painting regularly completes projects overnight or across weekends, with the space ready for normal use by the following business day.

How much does commercial interior painting cost in Perth?

Costs depend on the size of the space, surface condition, paint specification, and access requirements. Written, itemised quotes are provided for every commercial job — call [phone] or submit a request online for a quote returned within 24 hours.

Do you use low-VOC paints for commercial spaces?

Yes. Low-VOC and zero-VOC formulations are available and recommended for occupied spaces, particularly in healthcare, education, and childcare settings. These products reduce odour and allow spaces to be reoccupied sooner after painting is complete.

Are you insured for commercial painting work in Perth?

Top Kat Painting carries full public liability insurance for all commercial projects. Documentation is available on request, and all relevant workplace health and safety requirements are met for painting in occupied commercial premises.

[topkatpainting2]

Why Interior Painting Is the Smartest Upgrade You Can Make to Your Perth Home

Fresh paint does more than change a colour it changes how a room feels. Here is what every Perth homeowner should know before starting an interior painting project.

What a professional interior painting service actually covers

Many homeowners assume interior painting means walls and ceilings but a thorough job covers every surface inside the home. A complete service typically includes:

Walls and ceilings — primed and finished with a minimum of two topcoats in the correct sheen for each room

Doors, trims, and skirting boards — finished in semi-gloss for durability and easy cleaning

Hallways and stairwells — high-traffic areas that need a tougher paint system to handle daily wear

Feature walls — a single wall in a contrasting colour or finish to create a focal point in a living room or bedroom

The exact scope should always be confirmed in writing before work begins. At Top Kat Painting, every job is quoted with a clear surface list, product details, and timeline — no surprises on the day.

Surface preparation the step that makes or breaks the result

The single biggest difference between a paint job that lasts a decade and one that starts peeling within a year is what happens before the first coat goes on. Professional preparation includes:

Filling all cracks and holes with the correct filler for the substrate

Sanding surfaces to a uniform, smooth base

Priming all bare or repaired areas before any topcoat is applied

Treating active mould — particularly in Perth bathrooms and laundries — before painting begins

“Painting over mould without treating it first only delays its return by weeks, not years. Any painter who skips this step is costing you money in the long run.”

Every Top Kat Painting job starts with a surface condition assessment. If walls need significant repair before painting, this is identified and quoted upfront.

Choosing the right paint finish for each room

Colour is only one part of the decision. The sheen level affects how a room reads in natural light, how easy it is to clean, and how long the finish lasts. Here is what works best across Perth homes:

Ceilings — flat or matte finish to reduce glare and soften the look of any imperfections

Bedroom and living room walls — low sheen for a clean, modern look that is lightly wipeable

Kitchens and bathrooms — satin finish to handle moisture and clean easily without surface damage

Doors, trims, and skirting boards — semi-gloss for a hard-wearing surface that resists daily handling

We use Dulux and Taubmans products across all interior work quality Australian brands tested for local conditions. Low-VOC options are available as standard for households with children, pets, or sensitivities.

Frequently asked questions

How long does an interior repaint take for a standard Perth home?

A three-bedroom single-storey home typically takes three to five days with a two-person crew. Individual rooms, including all preparation work, are generally completed within one working day.

Do I need to move out while the painting is being done?

No. We work room by room, protect all floors and furniture with drop sheets, and ensure each space is liveable again by the end of each day. Keeping windows open while paint cures is recommended.

Will the colour I chose from a sample card look the same on my walls?

Not always and Perth's strong natural light makes this more pronounced than most places. North-facing rooms push warm tones further than a chip suggests; south-facing rooms can make the same colour read cooler and darker. Colour advice is included with every quote at no extra charge.

[topkatpainting2]

Residential Painting Perth | Complete Home Painting Services in WA

Your home deserves more than just a fresh coat of paint it deserves a professional finish that adds beauty, protection, and long-term value. At Top Kat Painting, we provide expert residential painting services across Perth, Western Australia, helping homeowners transform interiors and exteriors with clean, durable, high-quality workmanship.

Whether you are planning a full home repaint, updating tired interior walls, refreshing your exterior façade, or restoring your roof and gutters, our licensed painters deliver results that last. We work with premium paint systems, proper preparation methods, and proven techniques designed specifically for Perth’s climate.

From Bayswater to Morley, Maylands to Bedford, and all surrounding Perth suburbs, homeowners trust Top Kat Painting for reliable service, honest pricing, and outstanding finishes.

Professional Residential Painting Services Across Perth

Residential painting is not just about appearance—it protects your property from weather damage, moisture, UV exposure, and everyday wear and tear. A professionally painted home improves curb appeal, increases property value, and creates a cleaner, more comfortable living environment.

Our residential painting services cover:

Interior house painting

Exterior house painting

Full home repaints

Feature wall painting

Roof painting

Brick house painting

Gutter and fascia painting

New build residential painting

Every project begins with a proper inspection and a detailed written quote so you know exactly what is included.

Interior House Painting Services

Interior painting requires precision, preparation, and the right paint system for each surface. We carefully prepare every wall, ceiling, trim, and door before painting begins to ensure a smooth and lasting finish.

Our interior residential painting includes:

Walls and Ceilings

We apply smooth, even coats using premium acrylic paints for a clean and modern finish. Flat finishes are commonly used for ceilings, while low-sheen finishes work best for living areas and bedrooms.

Doors, Trims and Skirting Boards

These high-contact surfaces require durable finishes that resist marks and wear. We use satin and semi-gloss coatings for long-lasting performance and a polished look.

Kitchens and Bathrooms

Wet areas need moisture-resistant coatings that can handle humidity and regular cleaning. Our team uses suitable products for long-term protection.

Feature Walls

Whether you want bold accent colours or decorative textured finishes, feature walls help create a strong visual impact in your living spaces.

Good preparation makes all the difference. We fill cracks, sand rough areas, and prime all problem surfaces before painting begins.

Exterior House Painting Services

Perth’s harsh sun, high UV exposure, and changing weather conditions make exterior painting more demanding than standard interior work. A quality exterior paint job protects your home from fading, cracking, peeling, and moisture damage.

Our exterior painting service includes:

Rendered Facades

We prepare rendered walls thoroughly before applying a complete primer and topcoat system for long-term protection.

Brick House Painting

Exposed brick requires the correct masonry primer followed by breathable, high-performance topcoats that bond properly to the surface.

Roof Painting

We restore tiled roofs, iron roofs, and Colorbond roofing systems using professional roof painting methods designed for Australian conditions.

Gutters and Fascias

Rust treatment, priming, and exterior-grade coatings ensure gutters and fascias stay protected and visually consistent with the rest of your home.

We commonly use Dulux Weathershield and other trusted premium paint brands built for WA conditions.

Full Home Repaints

A full home repaint combines both interior and exterior painting into one complete project. This is ideal for homeowners preparing to sell, renovating older homes, or simply wanting a full transformation.

A complete repaint improves:

Street appeal

Property value

Weather protection

Interior comfort

Long-term maintenance costs

Our team manages the entire process efficiently while keeping disruption to your daily life as low as possible.

Why Homeowners in Perth Choose Top Kat Painting

Choosing the right painter matters. At Top Kat Painting, we focus on quality, communication, and professional service from start to finish.

Licensed and Insured

We are registered with the WA Building Commission and fully insured for residential painting projects.

Detailed Written Quotes

Every quote clearly outlines labour, materials, paint specifications, and project timelines—no hidden surprises.

Premium Paint Systems

We only use trusted brands like Dulux and other premium coatings proven to perform in Perth’s conditions.

Free Colour Consultation

Choosing the right colours can be difficult. We help homeowners select finishes that suit both style and practicality.

Local Experience

With over 15 years of experience across Perth metro, we understand local homes, local conditions, and what delivers the best long-term results.

Workmanship Guarantee

Every completed project is inspected carefully before handover because quality matters.

Areas We Service

We provide residential painting services across Perth metro, including:

Bayswater

Morley

Maylands

Bedford

Surrounding Perth suburbs

If you are unsure whether we service your suburb, simply contact us for confirmation.

Frequently Asked Questions

How long does a residential repaint take?

A full interior repaint for a standard three to four-bedroom home usually takes around five to seven days. Exterior repaints generally take three to six days, while full home repaints may take eight to twelve days depending on preparation and property size.

Do I need to move furniture before painters arrive?

We recommend clearing loose items and creating reasonable access in each room. Our team handles floor protection, masking, and furniture covering as part of our standard preparation process.

What paint brands do you use?

We commonly use Dulux and other premium paint systems suitable for Perth’s climate, ensuring strong durability and professional finishes.

Can you paint new builds?

Yes. We provide complete first-coat painting services for newly constructed homes, including walls, ceilings, trims, doors, and exterior surfaces.

[topkatpainting2]

Residential Exterior House Painting: The Ultimate Guide to a Long-lasting Finish

Residential exterior house painting is the practice of coating the exterior of a home with paint or protective coating, on the walls, trim, fascia, and eaves, and downpipes. When properly done, it not only safeguards the building against weather damage, but enhances the kerb appeal, and can provide a quantifiable value to the property. The average time that most houses need to be repainted is 7–15 years depending on the weather condition, the surface and the quality of the previous paint work.

Key Takeaways

Exterior house painting helps in the protection of structural surfaces against moisture, UV damages and weathering.

The bulk of the quality in the final result is in preparation; cleaning, sanding, caulking, and priming.

The choice of colour must consider the exposure to sunlight, style of architecture and neighbourhood.

The use of three primary colours (body, trim, roof elements) creates a clean, well-balanced effect.

Most DIY projects do not provide as fast, safe, and durable results as professional painters do.

Always demand a written quote and references before hiring a painting contractor.

What Is Residential Exterior House Painting?

Most homeowners do not take the extent of exterior painting project seriously. The evident brushwork is but a portion of a very long process. An exterior paint job requires surface inspection, pressure washing, scraping, sanding, priming, caulking, masking, painting, and inspection.

In the case of weatherboard or rendered houses, preparation may be a lengthy process in itself. Before any paint is put on, surfaces should be clean, dry and structurally sound. The first step should be to remove paint, rotten wood or hairline cracks in render, otherwise the new coating will not last long, no matter how good the paint is.

In order, the process typically involves the following steps:

Step 1 — Preparation: Pressure wash all the surfaces. Give time to dry. Scrape loose paint. Sand rough edges. Fill cracks and holes. Caulk around windows, doors, and joins.

Step 2 — Priming: Coat bare timber, repair, or a surface where colours are reversing (dark to light) with an appropriate primer.

Step 3 — Painting: Coat with two coats of exterior grade paint, with each coat completely dry.

Step 4 — Inspection: Look for any missed areas, uneven coverage, drippy paint, or paint on covered areas.

Step 5 — Clean-up: Clean up drop sheets, masking and other materials. Clean up the site.

The Right Exterior Paint Colour

Among the most impactful choices in exterior painting project is colour selection. Mistake is costly to undo and may influence the aesthetics of the property as it relates to its environment.

There are a number of practical considerations that ought to be taken into consideration prior to the application of any aesthetic preferences.

Reduce the Palette to Three Primary Colours

A good principle in exterior colour design is to use not more than three primary colours: the primary body colour, the primary trim colour (window frames, fascia, guttering) and an accent or door colour. Other materials like stone or timber cladding are a fourth element but are not to be painted, their natural variation keeps the palette down to earth.

The only exception to this rule is federation, Victorian and heritage-style homes, where several different accent colours are historically correct and architecturally anticipated.

Calculate How Sunlight Changes Colour

Colours in paint do not perform the same way they do in the field as they do on a chip or a sample card. Light actually lightens any colour by about four tints, sunlight. A grey that is picked in a paint shop can be interpreted as almost white when it is applied to a north wall in full afternoon sun.

The proper method is to buy a sample pot, pasted an area of at least one square metre on the front and back of the house and watch it at various times of the day. The effects of morning and afternoon light are quite different, especially on east and west walls.

Blend the Colour with the Architecture

Contemporary colour schemes are not restricted to contemporary homes. The federation bungalow is able to bear a clean and modern palette, though the colours must not overstep the proportions and detailing of the architecture. It is also true that a contemporary rendered house does not necessarily need a neutral or monochrome scheme, merely because it is newly built.

How to avoid Common Colour Mistakes

There are two mistakes that are recurrent in residential exterior repaints:

Emphasizing downpipes: Downpipes are not architectural features, but rather practical elements. They are to be painted to suit or blend well with the surrounding wall surface and as unobtrusive as possible.

Eaves painting white: White eaves are the most rapid in collecting grime and discolouration. A much lighter shade, usually a quarter-strength shade of the body colour, which in sunshine appears white, but which in age becomes much more elegant, is a better option.

Eco-Friendly and Low-VOC

Volatile organic compounds (VOCs) are substances that are emitted during the drying of paint as a source of air quality problems, as well as health problems in enclosed areas. Numerous high-end exterior paint lines currently have low-VOC or zero-VOC versions that do not have the environmental or health trade-offs of traditional products. These should be specified especially in homes where there are young children or individuals with respiratory sensitivities.

Do-It-Yourself Exterior Home Painting: The Real Deal

Many homeowners are trying to do exterior painting as a way of saving money. Some succeed. The project is more challenging, time-consuming, and more technical than many expected.

An example of a two-storey house with weatherboard cladding may take six or more full working days of labour by a two-person team that is skilled. To one homeowner who works on weekends, the same project can take four to six months of time available to complete the project, and the partially painted house will be subjected to weather, with the initial sections needing touch-ups before the project is finished.

The issue of safety is different. One of the main causes of severe home improvement injuries is working on upper-storey walls using ladders and scaffolding. Professional painters possess the right equipment, insurances and training to work at height.

The estimates of the cost of DIY exterior painting differ greatly but the prices of professional painters to paint a typical residential house are usually between a few thousand and tens of thousands of dollars depending on the size, condition of the surface, and location. Quality paint material can constitute 30–40 percent of the overall professional price.

DIY can be considered by homeowners who have time, physical ability and access to the right equipment and whose single storey homes have simple surfaces. In anything more complicated, the outlay in a professional outcome is usually worth it.

Professional exterior painting service: what to expect

A good residential painting company will supply, at least:

On-site free, detailed quote prior to any work.

Written scope of works with preparation steps and number of coats.

Evidence of current public liability and workers’ compensation insurance

An effective communication plan and schedule.

A guarantee of workmanship on the job done

It is also reasonable to demand references and portfolio examples of the similar projects of recent date. Lower prices do not necessarily mean a better value — a paint job that collapses in three years because it was not prepared properly will cost more to repair than a good job done properly the first time.

Residential Painting Projects: What do Painters do?

Not all residential painting projects are the same. others are simple single-colour re-paints of a modest house. Others are multi-surface colour variations, major repair, or elaborate architectural decoration. The knowledge of the types of projects aids the homeowners to create a realistic expectation concerning time, cost, and preparation needs.

Standard repaint: The most prevalent type of project. The house has maintained its current colour scheme and the work is based on surface preparation and applying new coats on top of old paint. The preparation time is usually less since the profile of the surface has been determined.

Colour change: To change a dark body colour to a lighter or vice versa, more coats of primer are needed and in some instances an intermediate colour coat is needed to get the desired full colour. This increases both time and material expense to a similar repaint.

New construction: Freshly painted or new installed weatherboard surfaces must have certain preparation, especially that the surface is completely dry, before topcoat is applied. Timber that is new should be primed all over, including end-grain, to avoid moisture ingress.

Repair and repaint: Houses with great surface damage, deep cracks in render, rotten timber areas, peeling paint due to poor adhesion in the past, etc. will need a greater amount of preparation before the commencement of the painting. These conditions will be evaluated by a professional painter at the quoting phase and will be covered by repair work.

Heritage and character houses: Federation, Victorian, and other period houses are many times characterized by elaborate joinery, colour areas, and surfaces that can only be well-brushed by hand, not sprayed. These projects are more time consuming and have the advantage of having painters who have experience in the restoration of period property.

One of the surest methods of determining whether or not a particular painter is the right one to do your particular job is to look at a portfolio of their past residential painting jobs, especially those which are of a similar type and size to your own home.

How to Find Residential Painting Services Near Me: What to Find

A search of residential painting services near me brings a long list of results in most locations. It is not a question of locating painters, but rather which ones will provide a steady, professional performance on your particular property.

There are a number of things that distinguish good local painters and bad ones, and not one of them can be seen just by a Google listing.

Licensing and insurance: In Western Australia, painters who are employed to work on residential premises must have the relevant trade licence. Workers compensation cover and public liability insurance cannot be negotiated. Always insist on having copies of both prior to commencement of work.

Local reputation and reviews: Google, local directory or word-of-mouth recommendations by neighbours have a greater impact than a website claim. Find regular references to the quality of preparation, punctuality, and the way the painter dealt with problems which occurred during the work.

On-site quoting: A painter that quotes a price without going to the property is speculating. An actual professional will examine the surfaces, evaluate the condition, measure the area and give an itemised written quote. This safeguards both sides and prevents scope conflicts in the future.

Communication: The way a painter reacts in the quoting stage is a fair gauge of how he or she will react in the job. Efficient and transparent communication in advance of the work is likely to be the same standard.

Local knowledge: A local artist who has experience with the unique factors of your region, such as climate, UV exposure, common surface types, etc., is a source of practical knowledge, which can be translated into improved choices of paint and paint preparation. Examples of such areas are Bayswater and the Western Australian suburbs, which have high UV in summer and change in humidity levels affecting paint selection and time of application.

Conclusion

The exterior house paint on residential buildings is one of the most noticeable and safeguarding investments that a homeowner can make on their property. When well prepared, good materials and with good taste in colour, the results may last more than ten years and make a significant contribution to the appearance and structural integrity.

Regardless of whether you decide to paint it personally or hire an expert, the rules remain the same: you should prepare surfaces, choose colours carefully and test them, apply the appropriate paint on each surface, and do not omit the primer. The preparation is what makes the difference between good and bad.

This is the standard that we carry to all of our residential exterior projects in Bayswater and Western Australia, at Top Kat Painting. Our crew offers free on-site estimates, utilizes environmentally-friendly paint and high-quality materials, and supports each job with a 100-percent satisfaction warranty. Get in touch with us to set up your consultation.

Frequently Asked Questions

How long does exterior house painting take?

An average single-storey house requires two to four days to be completed by a professional team, including preparation. This time will be prolonged by bigger houses, multifaceted surfaces, or major renovations.

When is the best time of year to paint the exterior of a house?

Most Australian climates favour mild temperatures of between 10C and 30C, low humidity and no rain fall within 24 hours of application. Autumn and late spring are typically good.

How many layers of paint on an exterior?

The majority of exterior surfaces are to be coated with a primer (on bare or repaired areas) and two finish coats. The darker to lighter colour variations might need another intermediate coat.

Should I pressure wash prior to painting?

Yes. Pressure washing also gets rid of dirt, mould, chalking and loose paint- all of which would not allow proper adhesion to be made. It is among the most crucial preparation steps.

What is the cost of exterior house painting of a residence?

The prices depend on the size of the home, the condition of the surface, paint type, and location. Professional exterior painting of an average residential house in Australia typically costs between $3,000 and $15,000 or more. You should always get at least two or three itemised quotes before tying yourself to a contractor.