Liquid Rubber Roofing

Liquid Rubber Roofing is very cost effective and easy application product in the market.

[weemmabrianmic]

Worth It or Not: EPDM Liquid Rubber Roof Waterproof Coatings

The Roof of the building whether commercial or residential can become troublesome if it needs expensive repairs every now and then. However, there are some things which you can do to bring down the number of times the Roof needs repairs. When you invest in the building it is the largest investment you will ever make. To protect your investment e.g. (building), you would also have to perform some upkeep and maintenance work as well.

The Trouble Usually Starts at the Top

If you owned and maintained any kind of building before you would know that the Roof of the building takes a lot of toll and beating. The Roof is the place where the trouble starts that brings on the need for repairs. Issues that you’ll usually find with a roof are gaps in the seams, water leaking in from somewhere, drafts coming in, or dents, dings, and scratches caused by flying debris or hail. If you have a flat Roof You could also see water ponding, meaning your roof doesn’t have good drainage, or drying that leads to cracks.

EPDM Liquid Rubber Roof Coatings

You can fix or prevent most or all of the Roof issues just mentioned by applying one of the EPDM Liquid Rubber roof coatings that’s available on the market today and marketed by EPDM coatings. A coating like EPDM Liquid Rubber will help keep your roof in the best shape possible and it will extend the life of it which can span for decades.

Application

This is an easy-to-apply DIY solution to most of the problems that building owners are faced with when it comes to their roofs. The coating comes in liquid form that simply has to be painted on and allowed to dry so it cures and creates an airtight, watertight membrane and UV resistant seal over the entire surface of the top of the building.

For roofs with area less than 5000 sq. ft. a squeegee and roller is used. You will need an electric drill, a Rubber squeegee with a broom handle, a ¼ inch nap roller and Zylene or mineral spirits for cleanup. For roofs with area larger than 5000 sq. ft., we recommend using airless sprayer.

“You can save time, money, and energy by using a product that gives you total coverage and protection in just a single coat.”

Is It Worth It?

The answer to the question of whether it’s worth it or not to put rubber roof coatings on rooftops is definitely a “yes”.

The roof of a building is continuously exposed to rain, snow, ice, wind, dirt, debris, UV rays, hail, and so much more. All of these extrusive elements can cause damage to the roof and makes the interior of the structure susceptible to even more damage.

Applying EPDM Liquid Rubber you can get a new roof at fraction of the cost of Roof replacement and prevent thousands of dollars in repairs and replacements by applying one of the rubber roof coatings to a building’s rooftop.

How Much Do Rubber Roof Coatings Cost?

Applying roof coating to the Roof cost you some money upfront but you will save money in the long run. How much it will cost to recoat your Roof with EPDM Liquid Rubber depends upon a number of factors.  Some of the price will be determined by how big the surface of your roof is. You’ll need to measure the length and width of the roof to get the coverage area. You’ll then purchase the amount of product needed to cover that surface. One important thing to mention is that you can apply EPDM Liquid Rubber Roof coating on most Roof surfaces without needing the primer and it gives you more coverage in a single coat.

If you are interested to learn to how to repair your roof visit https://www.liquidrubberroofing.com/ and to fix recurring Roof issues with EPDM Liquid Rubber https://www.liquidrubberroofing.com/rubber-roof-coatings-a-fix-for-recurring-roofing-issues.html

[weemmabrianmic]

Economical way to maintain and restore an aging commercial roof!

A roof is the mostly neglected part of the building but it is very important to keep it in an upkeep condition year round. Whether you work in your warehouse or you rent your space for any business activity, a leaky roof can be an expensive problem for a building owner. Aside from keeping the weather out of your building, your roof should look nice, too! Restoring an aging commercial building roof helps improve your property’s value, a safer working environment and everything inside.

Commercial Roof Restoration That's Very Budget Friendly

Your commercial roof is always exposed and vulnerable to various weather conditions, such as strong winds, hail storm and acid rain. All kinds of elements can cause your roof to expand and contract which eventually lead to considerable damage that will require the expertise of a roofing company that is very qualified in commercial roof repair and restoration.

EPDM coatings is a trusted brand of specialty aftermarket coatings you can be assured only the best material solutions are offered for your residential or commercial roofing needs. Innovation and advancements in roof-coating technologies have provided the industry with the necessary tools to increase the life span of commercial roof and avoid costly replacements or expensive tear-offs. Aftermarket coatings like Liquid Rubber waterproofing coating are meant to economically extend the life of your existing roof. You will certainly save a tremendous amount on overhead expenses by keeping your present aging commercial roof in good repair.

Industrial and Commercial Uses of EPDM Rubber Coatings

Steel Siding

EPDM Liquid Rubber coating is the best product for recoat and roof leak repairs on steel roll-formed siding when it has corrosion at the bends. When the one-coat system of Liquid Rubber is applied there is no need for any corrosion-inhibitive primer.

Fabricated Steel in Saltwater Environments

Support structures like tanks, and cranes at dock facilities often have higher corrosion rates because of being exposed to saltwater. Saltwater has no impact on EPDM Liquid Rubber waterproof coatings, and this makes it excellent for marine environments.

Steel Storage Tank

EPDM Liquid Rubber coating effectively protects ground-level or elevated steel storage tanks. Cathodic protection and surface condensation, and temperature stresses between shady and sunny areas will not negatively or adversely impact the EPDM Liquid Rubber coating.

Marine-Uses

Leaks on boats, ships and barges can be effectively repaired with EPDM Liquid Rubber coatings. Our 9911 Ship Shape product was specifically developed for marine use. It features excellent water and salt resistance, extreme temperature tolerance, ultraviolet stability, along with good flexibility.

Concrete Spill and Pipe Containments

Concrete pipes are effectively protected against saltwater corrosion when EPDM Liquid Rubber waterproof coating has been applied. An EPDM coating will be able to tolerate very high temperatures and strong sunlight exposure. It has higher solids (2.5 times more) as compared to coatings of liquid neoprene.

Corrosive-Environments

Many industrial operations use various acids and these can cause corrosive or caustic environments. Hog and poultry operations often produce high amounts of manure which can also create similar corrosive conditions. Rapid deterioration or corrosion of steel and many other construction materials can be prevented in these environments by applying EPDM Liquid waterproof coatings.

One Component Thermosets

All sizes and shapes of non-thermoplastic materials can be coated now with EPDM rubber to protect against chemical harm or corrosion. EPDM Liquid Rubber single-component, easy to apply, uniquely formulated for very specific applications and has safe storage stability. Solid and viscosity content is easily controlled which makes it simple to apply thin or thick EPDM rubber coatings.

EPDM Liquid Rubber vs. the Competition

Restore your aging commercial roof by getting free estimate at https://www.epdmcoatings.com/store/index.php also don’t forget to visit https://www.epdmcoatings.com/commercial.php.

[weemmabrianmic]

Resealing/Recoating Your RV with RV Liquid Roof is a routine part of ownership.

Spending time together in RV with family out on the road in pursuit of a beautiful destination sounds beautiful. That being said, RVs can be a heck of an expensive vehicle to have and things can go wary. The good news is that RVs can last for decades if properly maintained and taken care of using RV Liquid Roof Repair and Coatings.

Caring for your RV means caring for all of it, though, this includes the roof too. The Roof is out of sight which means it can go out of mind too which creates problems. A leaking RV roof is the most common issue faced by most RVers and yet they don’t know how to fix them. Continue reading and we will let you know how to deal and fix a leaking RV roof for once and for all.

Where a Leak Likely Sprung From?

Before you start fixing your RV roof for leaks first you need to understand where the leak is coming from or what the root cause of leaks is. Identifying leaks can be difficult for an un-trained eye. RV roof takes a lot of physical abuse throughout its useful life. The sun’s blazing UV rays will slowly wear away at your RV’s roof making it brittle, as well as extreme temperatures fluctuations, and the constant wind tunneling of driving down the road. Then there is the risk of physical damage too as tree limbs and hail can easily fall on a roof, causing cracks and dents allowing water to seep in causing leaks.

RV roofs are getting better and better these days but even the most durable roof will wear out causing problems. Once water penetrates the roof you will a new host of problems too.

Working Around These Problems

You can safeguard your RV by keeping it under the storage but it may not be a feasible option for every one as it is difficult to have large space enough to accommodate something big as RV. The more feasible and easy to go option is repair and fix your RV roof using RV Liquid Roof Repair and Coatings.

Once applied Liquid RV Roof forms a seamless protective layer impregnable to UV-rays and leaks. With Liquid RV Roof you can add years, if not decades, of life to your RV and your RV will be able to stand up to even the most severe weather extremes. Liquid RV Roof is true DIY product which means you can apply it on your own. You just need a little bit hand practice and a nap roller to spread it out evenly and paint brush for hard to reach areas.

Prevention is the best than cure, and RV Liquid Roof Repair Coating is the ultimate preventative measure for an RV roof.

[weemmabrianmic]

Can Liquid Rubber be sprayed?

Using EPDM Liquid Rubber is the best way to quickly restore your roof at fraction of cost of roof replacement. You will have a roof that looks better and will stand extremely well to harsh weather conditions and temperatures without cracking and flanking. Liquid Rubber is the most versatile and popular roofing material available on the market today.

When you open the tin of Liquid Rubber you will notice it looks like a paint material and not surprisingly it does on in much the same way. You can easily apply it with a brush or roller but if you need to cover a large surface we recommend using a sprayer for a quick and easier job. Let’s get stared with the Liquid Rubber Roof sprayer application.

First Prep the Surface

Before you apply Liquid Rubber, first you have to clean the roof. If you spray Liquid Rubber on a dirty surface then it will not work properly or it will bubble up or peel before even it had the chance to work. Also remove any oil coating or residues from your roof otherwise; Liquid Rubber will not adhere to the roof properly. Some roofs also require a base primer before you apply Liquid Rubber.

Tear Up Any Caulking

Before Liquid Rubber was on market, roofer used to seal the roof vents and seems and other openings on the roof using caulk. The good news is that when you are using Liquid Rubber then you don’t need to use any outdated caulk. Liquid Rubber rest alone will do the job for you.

Don’t Overdo It

Once you have clean the roof from debris and residues then now is the time to use the sprayer. Sprayers are powerful and make the job easier for you as they can spread the material far across the roof quickly. You need to adjust the sprayer for any gust of wind and tell everyone else on the roof before you start spraying. It the material gets on your clothing, vehicles or on your skin then you need to use mineral spirits to scrub the roofing material away.

Don’t Clog the Sprayer

Liquid Rubber is usually thick and won’t come out easily of your sprayer. You need to make it thin by adding a solvent. We recommend using of five-to-one when you mix the two and to use a solvent specifically made for liquid rubber roofing. Contact the specialist from whom you bought your roofing, and they should have the solvent you need.

Conclusion

Using a sprayer will keep your back from ache as you don’t need to bend over like with paint or brush. If you need to cover a larger area then a sprayer is the best tool. However, you can also use paint brush for some hard to reach areas.Just remember to prep the surface and go light with the first coat.

For more information, uses, history, application and technical specs; you can visit website https://www.liquidrubberroofing.com/ and for the sprayer application of Liquid Rubber https://www.liquidrubberroofing.com/four-quick-steps-to-using-a-liquid-rubber-roof-sprayer.html

[weemmabrianmic]

How to Select Best Liquid Rubber Roofing Product For Your Next Project?

EPDM is designed to use on flat and low-pitched roofs which require a durable long lasting solution. The material comes in both black and white finishes as per your roofing needs and also comes in sheet as well as in liquid form e.g. Liquid Rubber. EPDM has variety of application in both commercial and residential roofing projects.

EPDM is Ethylene Propylene Diene Monomer and is derived from oil and natural gas. It is the most effective roofing solution available and it provides unique protective features for the building and the roof itself like countering the damage done by sunlight and harmful UV rays, water damage, and temperature fluctuations.

“As summer is on the peak and most of us are quarantining due Covid-19 pandemic, this is the excellent opportunity to re-coat your roof and prepare it for post-covid winter season.”

EPDM Sheeting

EPDM sheet roofing comes in a variety of widths and sold in rolls. Available widths range from 7.5 feet to 50 feet, and you can also choose between 45 and 60 mils for thickness. EPDM sheet roofing can be installed in a variety of ways like:

· Fully-adhered

· Ballasted

· Mechanically attached

Liquid EPDM Roofing

The roofing product of today’s era is Liquid Rubber Roofing product.  Liquid rubber roofing product is preferred by most roofers because it offers a simple, seamless way to apply a protective coating to the roof. Instead of worrying about installing the sheet EPDM, Liquid Rubber is rolled-on or sprayed like a paint material and then left to dry. It will fill-in the cracks and creates a seamless membrane. Liquid roofing with Liquid Rubber is also less labor intensive.

Is All Liquid Rubber EPDM?

There are a number of liquid rubber roofing products available on the market today with different chemical composition and base material. Some products are silicone based while others products have a different rubber compound however, Liquid Rubber form EPDM coatings is the only true EPDM rubber in liquid form.

EPDM is Still the Favorite

EPDM is still the favorite roofing material on the market today as it offers the durability and flexibility needed by the roofs in extreme temperatures. Along with that it easy to apply, and creates a sleek, seamless membrane on any roof that will last for years to come.

To fix your roof leaks for once and for all visit

https://www.liquidrubberroofing.com/

[weemmabrianmic]

Is There Any Cost Benefit Of Using Liquid EPDM Rubber On Flat Or Low Slope Roof?

The roof of the building is often taken for granted but it is the most important element of the building that keeps everybody safe, dry and protected. Everyone will only notice the roof when it stars leaking or having issues but by then its probably too late. Along with routine maintenance there are many things which you can do to safeguard the roof before it needs replacement.

“During this pandemic you may be considering doing some work around your house, or possibly fixing up your roof. In any scenario on-site safety protocols by roofing technicians need to be observed.Workplace safety should always be held in the highest regard, conforming to COVID-19 requirements. “

Liquid Rubber roof coatings are famous for their easy application but there are certain things to make sure the application process goes on successfully each time.

It Starts with Proper Application

· Perform a full roof inspection. Check for damages, holes or leaks and weak spots or any other sign that the roof might require maintenance or repair.

· Apply the roof coating using brush, nap roller or sprayer depending upon the type of roof application you opt for. Liquid Rubber is a one coat product without needing a primer and will go on easily without much effort on your part.

· Although Liquid Rubber is a DIY product, you can let professionals handle the application if you are not the DIY type. This will also give you peace of mind that the application is flawless, and guaranteed, giving it a longer lifespan and saving you more money in the long run.

Keep Your Roof Clean

How long the liquid rubber roof coating last will depend how it is cared for. If you keep the roof clean and debris free the longer your liquid roofing will last because it is being kept in the best condition. Buildup of debris on the roof can affect the lifespan of rubber roofing by causing it to wear sooner than necessary.

Is there are any cost benefits?

·  Liquid Rubber provides a seamless single coat; roof coating that can be applied 3-times thicker than other elastomeric or acrylics coatings.

· Idea for flat or low sloped roofs where ponding is a common issue.

· A life expectancy of 18-20 years before recoating.

· Saving you time and money.

 Wrapping Up

Liquid Rubber is one of the best sealant available on the market but that doesn’t mean that you shouldn’t still try to get as much out of it as possible. By keeping these tips in mind, you make sure that your Liquid Rubber roof coating is applied properly in the first place, so that you worry less and enjoy a longer life out of any liquid rubber roof.

To shop for Liquid Rubber Call 855-281-0940 or visit https://www.liquidrubberroofing.com/ and for professional application of Liquid Rubber visit https://www.liquidrubberroofing.com/how-to-get-more-life-out-of-your-liquid-rubber-roof.html.

[weemmabrianmic]

Liquid Rubber Roofing: A Cheaper Roof over Your Head during the Covid-19 Pandemic…!!

EPDM rubber sheets are in use across many industries for various applications like making seals, appliances and many more. The most common use of EPDM rubber sheets is in the roofing industry for both residential and commercial roofing. It is a popular choice for roofers around the globe because it is more durable than other roofing materials like metal or fiberglass. If you opt for EPDM roofing you have two choices, you can opt for EPDM sheet roofing or you can go for EPDM liquid roofing. Let’s discuss both these options in detail.

EPDM Sheet Roofing:

The biggest drawback of sheet roofing is the fact that it has seams. These seams need to be sealed properly to avoid leaks. It also means that you have to repair theses seams more often which entails having professional expertise. EPDM sheet roofing is not something DIY, so in most cases you let professionals handle the installation, which is not something bad but it costs money.

EPDM Liquid Roofing:

In contrast to sheet roofing, EPDM liquid roofing is actually EPDM but in liquid form and has much more benefits. You can apply liquid roofing three times thicker with only single coat and even without needing a primer. Also with liquid roofing there are no seams involved. Liquid roofing products like EPDM Liquid Rubber are so versatile that you can apply them over different roof surfaces without needing a primer. Unlike ordinary coatings which require24-hours to cure, EPDM Liquid Rubber waterproofs the roof directly upon application. Also EPDM Liquid Rubber is a true DIY product which results in savings in terms of labor and material costs.

Long-Term for Less Hassle

Whether you opt for EPDM sheet roofing or liquid roofing, EPDM roofing offers a durable and cost effective roofing solution that doesn’t need much of your attention except asking for routine maintenance. Mostly you will need to reseal your roof every 3 to 5 years but that’s routine part of the maintenance. Although EPDM liquid roofing is the new facet of EPDM roofing, EPDM sheet roofing will also not let you down if you choose it.

Corona virus has spread vastly across the world with each day passing there are more cases and deaths reported. Still there is no proper cure and many vaccines are under trial, it means you have to live with it by following guidelines and maintaining social distancing. But that doesn’t mean that you skip your roof maintenance because your roof needs protection too.

If you want to shop for Liquid Rubber visit https://www.liquidrubberroofing.com/ for material review on EPDM roofing visit https://www.liquidrubberroofing.com/epdm-rubber-roof-sheet-roofing-vs-liquid-rubber-roofing-options.html

[weemmabrianmic]

Nothing better counters a Roof Leak than Liquid Rubber Sealant. Remember it’s not like your daily Ordinary Sealant…!!

Roof will spring up leaks from time to time. This is not surprising because roof takes the toughest toll from harsh weather exposure to the things that can cause the most damage. Harsh weather conditions will have its toll on the building and the roof will be the most vulnerable one. If you are looking for any solution to stop the leaks then look no further because Liquid Rubber is what you only need.

What is Liquid Rubber Sealant?

Liquid Rubber is EPDM in liquid form. When applied properly it creates water tight seal which protects the roof from extrusive elements like that cause damage like water, wind, and dirt. It has some other benefits too. UV rays work at drying, fading, and cracking the surface of a building’s roof material, which in turn leads to more leaks. It block the damaging UV-rays. In summer it block UV-rays which means the sun isn’t able to make your AC unit work overtime to keep everyone cool. Furthermore, it also won’t allow the hot air to escape out of the top which keeps your building nice and warm during the winter.

Compatible Roof Surfaces for Liquid Rubber Sealant

Liquid Rubber sealant that can be used for:

EPDM

TPO

Metal

PVC

Wood

Butyl rubber & Hypalon rubber

On top of other coating products

Should I Use a Primer First?

With most Liquid Rubber sealants you will need to apply a primer to ensure proper adherence with the roof. The good thing about Liquid Rubber is that it does not need a primer (in most cases). Liquid Rubber also needs a single coat for most roof applications which also saves time, money and material costs.

The End Result

EPDM roof coatings create an impregnable membrane that will protect the roof extrusive elements. Your roof will function better, look better, and live longer due to your great decision.

Interested in learning more about liquid rubber roofing visit https://www.liquidrubberroofing.com and to further enrich you knowledge about roof sealants visit https://www.liquidrubberroofing.com/not-another-leak-liquid-rubber-sealant.html

[weemmabrianmic]

Best Liquid Rubber Sealant for Coating and Protecting Commercial and residential Roof from Weather Hazards

According to industry experts a best Liquid Rubber is one which works the most effectively for your needs and put your mind and wallet at ease in terms of money, time, and energy. Before creeping into more details just look at what Liquid Rubber is and does. 

Liquid Rubber

Liquid rubber is used as a coating to shield the roof from water, wind, debris, sunlight, and other harmful elements that can cause damage to roof and prevent issues down the road. One of the most popular use of this coating is in the construction industry with liquid rubber is using in both residential and commercial roofing projects.

Now let’s look at all some of the benefits it provides when you use it as a coating for your structure’s roof.

Benefits of Liquid Rubber

· Rain: Rain can cause water ponding and sometimes seep inside through gaps in seams, cracks in the roofing material, and places where caulk is deteriorating. Liquid rubber coating will seal up all the spots where moisture has the chance to get through to the interior.

· Wind: just as water, air can also creeps into the holes or openings. Liquid rubber will fill up any cracks or holes making it airtight so that wind and air that’s extremely hot or cold can’t make it inside the house or other structure.

· UV rays: Sun UV rays can cause a lot of damage to your roof. Harmful uv-rays dry out the roofing material which leads to cracking, shifting, and deterioration. Liquid rubber will block 100% of UV-rays back up off of the roof.

· Scratches and dings: Low-hanging branches can scratch the roof of your home, sometimes going deep into the material. Liquid rubber coating will being flexible to handle temperature variations provides a scratch resistant layer for the surface of your roof.

To Sum Up

Choose a Liquid Rubber coating that adhere properly to any roof material and don’t need a primer.EPDM’s Coating Liquid Rubber is a coating that blocks UV-rays, water-proofs the roof and is not affected by water ponding. Choose EPDM Liquid, choose wisely.

To learn how EPDM Liquid Rubber stands out from the competition visit https://www.epdmcoatings.com/competition.php for Liquid Rubber benefits please visit https://www.liquidrubberroofing.com/what-is-the-best-liquid-rubber.html

[weemmabrianmic]

Liquid Rubber Roofing Series: Technical Application Of Liquid Rubber Using A Sprayer

Spraying Liquid Rubber isn’t difficult if you have the right tools. You will need an airless pump gun and a carefully chosen hose to do this job. You will have to do some calculations to figure out the right size and kind of pump for this pump. As in liquid form Liquid Rubber is a thick paint like product so you have to thin it by mixing it with a solvent.

Before you start spraying Liquid Rubber, you first have to clean the roof to remove dirt, debris and any loose material. The roof should be clean and dry otherwise Liquid Rubber will not properly adhere to the surface. Also, re-caulk the areas where caulk is missing.

When spraying start from the top of the roof and then making your way backwards. Use brush for detailing and hard to reach areas. Liquid Rubber will take some time to cure so choose a sunny and clear day for application. If the coating isn’t allowed to dry properly, it won’t cure as it should make it less effective.

To speak with a Technical Support Representative, Call: 855-281-0940 or visit,https://www.liquidrubberroofing.com/and to get yourself familiar with liquid rubber roofing visit,https://www.liquidrubberroofing.com/tips-for-using-a-liquid-rubber-spray-for-your-roof.html

[weemmabrianmic]

Does Liquid Rubber Roof Coating addvalue to your Roofing System…? Let’s see how it happens…!!!

Like everything else your roofing system also has a certain year of useful life left after which you have to replace it. Sooner or later this is something bound to happen. If, you decide to replace the roof eventually it will face the same fate faced by the previous roofing system. So, what should be the alternative course of action?

There is a better option, which is what we’re going to talk about now.

Create a Like-New Roof with Liquid Rubber Roof Coatings

Liquid Rubber roof coatings can restore old roof at a fraction of the cost of roof replacement. Liquid Rubber roof coatings protect what’s underneath from Mother Nature destructive forces. The deterioration is what results in cracks, leaks, holes, and more and the ultimate destruction of your building in extreme cases.

Benefits it offers

·         Liquid Rubber water-proofs the roof directly upon application although it may take some time to fully cure.

·         Liquid Rubber has reflective properties which reflect and block UV-rays.

·         Along with water proofing Liquid Rubber also forms an insulation seal around the roof, which means air or wind will not pass through any gaps. The interior of the building can stay cooler in the hot months and warmer in the cold months.

·         Liquid Rubber roof coating protects the roof from scratches that can occur from branches and other items like flying debris. 

Application ofLiquid Rubber Roof Coatings

The best thing about Liquid Rubber roof coating is that you don’t need to be a professional to apply it. All you need is some handy home tools and the inclination to do the job all by yourself.

·         Inspects the roof and mark the areas requiring immediate attention.

·         Clean the roof form dirt, debris, oil residues and any other loose material.

·         Power-wash the entire roof and let it dry under the sun.

·         Roll on the roof coating with a nap roller or spray it on with a sprayer tool and hose evenly to desired thickness. Use paint brush for hard to reach areas like corners.

·         Leave the coating to dry and give it at least 24 hours before you walk on the roof.

To shop for Liquid Rubber Call 855-281-0940 or visit,https://www.liquidrubberroofing.com/ and to how to avoid expensive roof replacement visit,https://www.liquidrubberroofing.com/heres-a-reason-not-to-replace-your-roof-liquid-rubber-roof-coatings.html

[weemmabrianmic]

7 Reasons to Consider Using EPDM Rubber Coatings on Your Commercial Roof

The roof of your commercial building is critically important. Without a sound roof, everything within the building is at risk. This allows you to immediately repair damage when it occurs, even if it is in the middle of winter.

https://www.liquidrubberroofing.com/7-reasons-to-consider-using-epdm-rubber-coatings-on-your-commercial-roof.html

[weemmabrianmic]

Most Beneficial Characteristics of Liquid Rubber

It only needs a single coat, or two at most, and you do not need to have a primer. Although, if a material is already primed, the Liquid Rubber can still be used just as easily.

https://www.liquidrubberroofing.com/most-beneficial-characteristics-of-liquid-rubber.html

[weemmabrianmic]

Need to Know Information About Liquid Rubber

This is one of the most frequent questions because people want to make sure they are buying the right material for the job. You will find that Liquid Rubber can be used with many different types of surfaces.

https://www.liquidrubberroofing.com/need-to-know-information-about-liquid-rubber.html

[weemmabrianmic]

Who Should Use Liquid EPDM Rubber for the Roof?

If you are a homeowner who has a residence that has a flat roof, or a low sloped roof, then you may be able to utilize this type of surface for your roof. 

https://www.liquidrubberroofing.com/who-should-use-liquid-epdm-rubber-for-the-roof.html

[weemmabrianmic]

Liquid EPDM Rubber doing wonders for commercial buildings

Liquid EPDM Rubber is a new feat in the roofing industry which has revolutionized the roofing industry both residential and commercial. Having said that, what Liquid EPDM Rubber actually entails…?

What is it?

EPDM (ethylene propylene diene monomer) is a synthetically manufactured rubber material which comes in both solid sheets as well as in liquid form. 

Application

Liquid Rubber can be applied to various roofing materials and roof shapes including flashing and protrusions.

·         Fiberglass

·         Concrete

·         Foam

·         Metal

·         Wood

·         Fabric

·         Rubber

Benefits of using Liquid EPDM Rubber

EPDM Liquid Rubber offers a blend of benefits especially to low slopped flat commercials roofs. Its benefits include the following as mentioned.

·         Water ponding is a serious issue for flat commercial roofs. EPDM Liquid Rubber can withstand continually submerged water year round.  

·         EPDM rubber roofs last longer than other roofing materials, does not tear apart as it is very elastic material. It won’t start cracking due to shrinkage- or expansion tensions in the roof

·         EPDM Liquid Rubber not only water-proofs the roof it blocks UV-rays and is not affected by extreme weather conditions.

·         It’s low on maintenance, with only periodic maintenance it lasts around 18-20 years.

·         With only one coat and no primers needed it saves both labor and material costs.

·         In liquid form is a very light material which can be applied like a paint material with the roof not needing any kind of deck reinforcements.

Environmental Impact

In this era of global warming and environmental responsibility, roofing materials have come under considerable scrutiny. Liquid EPDM rubber coatings are also superior in terms of sustainability and environmental impact as compared with other roofing materials.

To Conclude

EPDM flat roofing is becoming an increasingly popular roofing material for commercial roofing because it’s incredibly inexpensive to purchase, install and maintain over its lifetime, which can span decades. EPDM roofs often require some ongoing maintenance but thankfully with EPDM’s coating Liquid Rubber maintenance is quite easy and inexpensive.

To create a Like-New Roof with Liquid Rubber Roof Coatings visit,https://www.liquidrubberroofing.com/ and to enrich your knowledge about Liquid EPDM Rubber,https://www.liquidrubberroofing.com/how-liquid-epdm-rubber-works-on-commercial-buildings.html

[weemmabrianmic]

Prepare the Roof for EPDM Rubber Coatings

You need to inspect your roof to look for signs of damage. Look for things such as corrosion, gaps, cracks, and tears. If there is rust on the surface of the roof, you can sand it away before you get started.

https://www.liquidrubberroofing.com/prepare-the-roof-for-epdm-rubber-coatings.html