In the laying process of WPC flooring, it is more important to install the keel. How to install the keel of WPC flooring?
1. Tools and material preparation: ordinary woodworking tools, electric drills, expansion screws, keels, plastic wood flooring, floor fasteners, etc. 2. According to the situation on the site, arrange the cut plastic wood keels evenly and spread them on a flat cement floor. It is recommended that the spacing of each keel be between 30-40mm. Use an electric drill to punch the plastic wood keel, the aperture should be slightly smaller than the diameter of the expansion screw. Screw the screws into the holes already made on the keel and fix them on the ground (note that all the screws must be screwed into the keel and do not protrude the keel) 3. Each piece of WPC floor has a fastener slot, align the edge of the floor with the keel, and use the WPC floor fasteners with screws to screw it into the keel. 4. When installing the second floor, snap the groove of the floor fastener into the fixed first floor fastener, and then use the fastener to fix the floor to the keel. The subsequent installation method is the same. 5. After the paving of all plastic wood floors is completed, the plastic wood floors should be edged for aesthetics. The edging can be directly fixed to the edge of the floor with screws using the plastic wood L-shaped frame.
Alibaba: shanghaiwpc.en.alibaba.com Whatsapp: +86 17601285214 Web: diyonlinemag.com Mail: [email protected]