3S Infotech

        3s infotech specialized MEP/FP Experts with more than 15 Years of US-Based projects. We provide world-class MEP/FP engineering and drafting at a fraction of cost as compared to similar services in the USA. Our MEP/FP experts are adept at US Standards & Codes, which makes them best suited for your needs.      

[3sinfotech-blog]

Structural Engineering Basics

Beams and columns are two essential types of structural components that play a crucial role in providing a stable load route for the movement of weight and power to the base and the ground of the building. Beams and columns might be made using the same shapes and resources, but each has a different purpose and gets built differently.

Beams are typically horizontal structural elements that carry loads vertical to their longitudinal axis. Think of the balance beam in the gymnasium. It is a rectangular structure 15 feet long and held at both ends. When a human steps on a beam near the centre of the period, his weight is a vertical downward force functioning perpendicular to the longitudinal position of the beam.

Beams are used to bearing the weight of the floors, ceilings, and roofs of the building and to move the load to the vertical load-carrying portion of the structure. Often wider and heavier beams termed transfer beams are used to carry the combined weight of stacked walls or other beams and distribute the load to the reinforcements.

The configuration or scale of the beams involves an understanding of the fundamental concepts of physics and engineering statics. The structural engineers of structural design BIM modelling services are qualified and completely prepared to verify the loads acting on the beam, measure the forces and pressures on the beam, and select the material, scale and form accordingly. The structural construction of beams in new buildings and the reconstruction or reinforcement of existing beams in the framework are part of the architecture consultancy work that 3D piping modelling services give to their clients.

In the case of new construction, there is more versatility in selecting the size and form of beam materials that fit better for the structure. The most popular types of materials that get recommended to the clients by Arc flash studies services are beams made from steel parts, reinforced concrete, stonework, and beams made of wood. Both materials have their pros and cons but are typically chosen based on their quality, size, and fire ranking.

There are a few aspects that are taken into consideration when operating on the structural construction of a new beam or the reconstruction of an existing one by power system studies services. These considerations include the amount of load acting on the beam, the length or duration of the beam, the simple height allowed below the beam or other geometry restrictions, the beam deflection limits, the material power, and the fire rating and resistance. Related considerations get used in the construction of columns.

Columns are vertical structural components where the burden is shifted parallel to the longitudinal axis as stress, often as stress. Think of a rectangular table with four legs in a corner. The weight of the table and all the items on the table gets moved to the floor through the compact legs. In this case, the legs should be called columns.

Columns get used to reinforce the floor/roof pillars and the upper floor columns. The columns on the bottom floor of a tall building may have the combined weight of all the levels overhead. This is why the position of the columns should preferably be uniform on all floors. This is not always feasible, particularly for a difficult architectural design in which each floor has a different configuration. In such situations, it is also advised to involve the structural design team early on in the project and consult with the architects and create the most suitable column configuration.

A few things are taken into account when planning a column in a new house. It is started by measuring the weight of the floors/roofs supported by the pole, then choosing the material and size as needed. The height of the column is a significant part of the total scale of the column. A column that reinforces 1,000 pounds and is 10 feet tall will be twice as wide as a column that reinforces 1,000 pounds and is 20 feet tall. It all falls on the design of the columns and the structure of the final.

Let's hope that this provides you a clear understanding of what beams and columns are in the construction and house and why they are critical structural components that cannot be ignored. Next time you step into a building or drive over a bridge, consider looking around to find out which features you see getting used as beams and which are columns.

[3sinfotech-blog]

Reasons to Outsource 3D piping modeling services

Over the past few years, global engineering outsourcing has grown significantly. The market size in the year 2016, was somewhere around 145.26 Billion. There was pressure to minimize costs on the authentic equipment manufacturers in the market, and there was an intense competition. Moreover, the increasing technical challenges were most likely to grow in the next few years down the line. 

The engineering services outsourcing undoubtedly will stay here as the product life cycles have become short. There is a competitive environment out there, which demands strategic outsourcing, including accessing skilled expertise, flexible staffing, and enhancing efficiency. Not just engineering services, other services such as fire protection outsourced.

There is a need for the hour to outsource engineering services and fire protection as not many companies have expertise. Many businesses across the world have realized this eventually. One of the main reasons for outsourcing is that these assignments require some standard skills and knowledge readily available in developed countries. By outsourcing 3D piping modeling services, the company's team can focus on other strategic and challenging engineering projects. 

Why Should You Consider Outsourcing 3D Piping Modeling Services?

High-Level Expertise Readily Available

Many expert engineering resources are available who have years of experience in generating intelligent 3D models with the efficiency to produce and alter isometrics and gather material bills. Moreover, getting the job done from an experienced person is always a better idea as it helps minimize errors. Also, the process gets done with practical ways to reduce time and cost at the same time.

Intelligent and Innovative Solutions at Budget-Friendly Rates

If you are an enlisted professional, you get the advantage of smart solutions and innovative ideas that help you find creative ways to deal with the real-world challenges of engineering. It indicates that along with software tools, the engineers also need to think out of the box and deliver some smart solutions to increase productivity.

Maximum Use of Space

As per SKM system analysis professionals, one needs to optimize the plant space and improve accessibility and easy maintenance. Some highly CAD systems revolutionized in the piping systems. Additionally, outsourcing has minimized the cost of hiring skilled professionals. Thus, it would be best if you outsourced the services and reduce wastage. 

Flexible Engagement Models

You can get the best flexibility in engagement models by customizing it towards the clients' schedule, provided the company has a proven track record. In today's dynamic world, customization gets demanded by every client. Hence, customization cannot really happen in one go. Only the professionals who can do customization are those who have years of expertise and a steady hand on the work. 

Accuracy and Compliance to International Standards

SKM system analysis professionals state that piping engineering plays a crucial role in any plant design. Thus, not only efficiency is essential in the piping models built, but also perfection is demanded in such a dynamic environment. 

Apart from cost-benefit, outsourcing also offers essential advantages, like speeding up your delivery schedule, minimizing the errors, etc. Hence, outsourcing has been advantageous for many businesses in many sectors, proven by the track record. 

[3sinfotech-blog]

BIM Modeling – Revamping the Construction Industry

Ideally, BIM got introduced in the 1960s to 1970s, but it got implemented much later. Slowly almost all functions in the construction industry were done with BIM. The structural design BIM modeling principles are used in all stages, from planning to designing. Even cost is estimated using structural design BIM modeling. BIM model took over all the functions and integrated them under a single platform. 

The model has changed everything as it had processes that were collaborative and straightforward. The BIM model is an essential part of BIM.

What Are the Offerings by BIM? 

Ideally, building an information model is an advanced technology that makes the process integration in the AEC industry easy. The process can be either functional or physical elements featured in the construction sphere. As per Autocad Revit professionals, BIM makes it professionally possible to construct the entire building and intact with all aspects of any device. Engineers can detect the clashes and resolve them quickly when all elements are built on the computer. BIM offers efficiency and authenticity at a limited cost.

The Autocad Revit professionals say that it is a fantastic tool provided to AEC professionals to plan, operate, design, and manage the entire work with restricted errors.

Thus, the BIM model is an integrated term used to describe almost all displayed elements on the computer. It is a generic term used to define all the parts of the construction.

Elements of BIM

Information

It is related to aspects that offer details about the project in various modes. BIM clash detection suggests that one has to follow two types of data, including models and documents.

People

The human element is essential for the success of any project. Project managers play a vital role in the implementation of BIM.

Technology

The software and hardware fall under this element.

Benefits of Using BIM Model

1.      Reduced Re-Work: Assumed that the virtually connected model means everyone connected to the project will understand the scope of the project. Besides the BIM clash detection, the model also helps in saving time and money.

2.     Value for Architects: Before this model, the architects had to reconstruct the designs and drawings, but with this model, everything has changed. The architect can easily make changes to the project now

3.     Information Boom:  Currently, the best amount of information is used by project engineers and technicians. With the use of BIM, you can draw any construction. 

Thus, BIM will be used by all architectural companies.

[3sinfotech-blog]

Arc flash analysis services

One of the most dangerous possible incidents that can take place in a facility is Arc Flash. There is a high risk of an arc flash taking place in a space where high voltage cables or equipment are kept, furthermore many factors can increase or decrease the risk. As per Arc flash studies, Arc flash labelling has been used for quite a long time now. It motivates employees to wear the perfect personal protection equipment to reduce the dangers.

Though there aren't any legal requirements for arc flash labeling, almost all facilities use these labels to help their employees to stay protected. Arc flash studies also state that it is essential for any manager to understand the arc flash label requirements and how they can remain protected.

Arc Flash Label Requirements

One of the most crucial requirements of Arc flash labeling is that a company needs to field label all the electrical types of equipment that are prone to the potential risk of hazardous arc flash. Professionals that offer Arc flash analysis services state that this requirement falls under the NFPA 70E requirements.

There are some disagreements or disputes regarding what this requirement correctly states. It is essential to have unique labeling in place that provides a warning when there is a risk of an arc flash.  

Arc Flash Safety

As per experts offering Arc flash analysis services, these labels are essential for arc flash safety. They warn of the risk of a potential arc flash and provide critical information for choosing the perfect professional equipment that will help everyone be aware of how to remain safe.

There will be a more significant requirement of PPE if there is a high voltage present. One can also reduce the risk by using the right tools that are made from materials that aren't the conductor of electricity.

Arc Flash Warning

Arc flash studies services state that it is challenging to warn people about an arc flash. 

It can be useful to put labels at first sight, but with time, employees tend to ignore it. It is the only reason why it is essential to have an integrated arc flash warning system. Besides arc flash labeling, most companies use arc flash posters, signs, and provide specific training.  

Arc Flash Label Choices

When it comes to choosing the arc flash labels, finding the right balance between cost and effectiveness is challenging. In most cases, companies don't mind paying extra charges for the customized labels needed by them. In such a case, it would be great if you have an on-site industrial label printer that will help in minimizing the cost and also ensure that labels are personalized. In some parts, one can use pre-printed generic labels.

Arc Flash Stickers

The majority of the arch flash labeling options will be in the form of arc flash stickers. These stickers can either be customized or printed on-site. Ideally, the safety managers need to identify risk-prone areas and put stickers on the walls or machines present in that area. One needs to ensure that labels are visible easily to the employees.

Planning and Implementing Arc Flash Labeling Standards

Arc flash studies services state that as long as the firms meet the regular requirements for safety, the unique ways of labeling are left to the supervisor of the facility.

[3sinfotech-blog]

Some Valuable Insights About Clash Detection in BIM

Multiple stakeholders are active participants in any construction design project, for instance, architects, contractors, structural engineers, suppliers and vendors etc. With an increase in demand, the entire system of construction and building design is facing issues regarding the timely completion of projects. But equally important is the fact that one cannot compromise upon the accuracy and precision during the completion of a project within a fixed deadline.

The modernization and up-gradation of technology have started to leave a profound impact on the world of engineering design. One such boon of advanced technology to the construction industry is clash detection in BIM. There many benefits of clash detectionas it immensely helps in accelerating the construction projects. It does so by identifying clashes between multiple models. All these happen during the design stage itself. Thus, contractors and architects can effectively eliminate chances of multi-level design alterations. Hence, we can say that 3D BIM clash detection is highly beneficial in preventing unnecessary expenses.

All About Clash Detection

Whenever we talk of BIM modelling process, we cannot miss out on its most significant element, i.e., clash detection. Basically, BIM modelling is all about designing as per multiple disciplines of engineering design. Architects, environmental engineers, MEP engineers and other professionals create design models. When all these models come together under the BIM modelling process, clash detection in BIM comes to the forefront.

One of the greatest benefits of clash detection is that it makes sure that all the aspects and parameters work simultaneously without any sign of incompatibility. Advanced stage computer-aided 3D BIM clash detection technology helps in overcoming the last-minute hurdles. It helps in saving precious time, money as well as effort.

How Does Clash Detection Work?

Before the advent of detecting and resolving clashes, the construction industry was suffering from issues like escalating budgets, project completion delays, last-minute surprises and so on. With the help of BIM clash detection, it is possible to take into consideration any kind of clashes in the design. Because of modern 3D graphics, detecting and resolving clashes with clash detection gets very easy. Because of 3D BIM clash detection, architects now are capable of detecting clashes much before the on-site construction process.

Computerized BIM process is capable of evaluating multiple federated models simultaneously. All the stakeholders of engineering design can thus coordinate with each other regarding a specific model.

Thus, we can see how beneficial it gets when we use clash detection in BIM. From reducing expenditure to enhancing the final output, this technology can accomplish everything with its efficient feat.

[3sinfotech-blog]

About 3S Infotech

3S Infotech MEP + Structural team takes pride in being the top provider of engineer design and drafting services to our customers in United States. This comes from our focus on delivering projects exceeding client’s expectations of quality, schedule, and cost. Our team of engineers with more than a decade of experience working on projects in United States makes them perfect to deliver quality product for almost any commercial project.

 3S Infotech has become one of the top MEP engineering, designs, and drafting services company, with employees that obsess over clients. They go above and beyond to deliver world class services. 3S has always aimed in giving their customers the best solutions by using the latest versions of AutoCAD & Revit suite.

 3S Infotech provides services such as schematic design, design development drawings, final construction drawings, and BIM model. We follow agile method of delivery, where our team becomes an integral part of client’s project team. This enables us to proactively adjust the design as the project progresses. This enables us to deliver a wholesome design where input from all stakeholders and one that works the best.

[3sinfotech-blog]

3S Infotech usually work for breaker coordination, BIM clash detection, revit family creation, SKM system analysis, CFD modeling, MEP, NFPA NEC IMC IECC, steel fabrication and many more services.

3S Infotech provides services such as schematic design, design development drawings, final construction drawings, and BIM model. We follow agile method of delivery, where our team becomes an integral part of client’s project team. This enables us to proactively adjust the design as the project progresses. This enables us to deliver a wholesome design where input from all stakeholders and one that works the best.