Adrift in Neon Space

Made in the 80s || Any pronouns are fine Multi-fandom. Posts will likely consist of Gravity Falls, Hellaverse, FNAF, Lego, and anything else currently taking over my mind.

[bowbeforemegatron]

@8bithellscape and I's Springtrap and Foxy costumes at Megacon 2025! We didn't have time to do everything we wanted, and there's definitely some room for improvement, but we were still pretty happy with how they turned out.

[bowbeforemegatron]

I decided to take a bit of time off from the costume to make some Halloween decorations for the door. The standees were made of cardboard, posterboard, and more than a bit of paint. @8bithellscape made some beautiful paper pals, drawings, and of course No. 1 Crate! My favorite part was of course Foxy, though. I stuck Foxy's helmet and chest on a precarious stack of boxes in the window with some curtains made from fabric I found on redbubble. My roommate rigged up the light's she's been working on for the eyes to make him extra spooky.

The kids who came to the door loved it and our first visitor was even in a Monty costume. Adorable!

Happy Halloween all!

[doctorsiren]

Day 20 of Sirentober / Doctober

Hands / Journal

You can tell who never made a deal

[ninaheta]

"YOU'LL BE BACK" Gravity Falls Animatic!

[marineflamez]

billford animatic i made to the song 'confrontation'! ^^

[chloesimaginationthings]

The ending of FNAF Help wanted..

[chloesimaginationthings]

You know Henry’s final speech went hard in FNAF

[kelpforestdwellers]

i deserve to be an eel. in a crevice with a bunch of other eels. opening and closing our mouths over and over

[kelpforestdwellers]

everyone who reblogged this has joined me in the eel crevice. its a pretty big crevice

[kelpforestdwellers]

oooo we eelin

[bowbeforemegatron]

Before fully covering Foxy's head, I added a hatch in the back to make accessing the eye and ear mechanisms easier. It swings on a hinge and is locked in by a pair of magnets on some corner braces. After that, I covered everything with fleece and glued it all down with Fabri-tac. Once it was wrapped, I added some weathering to it and the stomach. Foxy has a strange pattern on his stomach, but I did my best to imitate it and am pretty happy with how it came out. Also included in this compilation is an updated look at @8bithellscape 's Springtrap head. So creepy.

[itsscaredycat]

karaoke night ✨💫

(tap for better quality)

[chloesimaginationthings]

Teen Michael and Vanny form a FNAF alliance,,

[hntrgurl13]

I MADE THESE BC IM OBSESSED WITH EPIC

[dailybill-cipher]

[265] Billtober 2024 Prompt List

Presenting to you, once more, Admin Book's version of Billtober! An art challenge where you draw Bill Cipher for the whole month of October!

Prompt list is a bit early this year, but I just wanted to post this so those who want to participate can prepare in advance!

This year's prompts are inspired from The Book of Bill. However you are free to make your own twist and not copy directly from the book! There are some repeated prompts from last year as well since I can.

Rules:

- Do not trace/repost/copy anyone's art.

- Anything AI is not allowed.

- It can be in any medium! (e.g Fanfic, Poems, Illustrations, etc.)

- You are free to skip any prompts or even just do 1 or 2 prompts! Try not to burn yourself out.

- Have fun!

Use the hashtag: #dailybilltober2024 if you are using my prompts! You may also use #billtober2024 if you want.

Feel free to tag me! I like to see what you guys made for the challenge. If you have any questions, don't be afraid to ask! I'll try to answer them if I can.

[that-howlingdrakesng]

He don't bite

[dipperpines-kin]

The Sweet Dreams Bill Cipher Figure from The Book of Bill is complete!

Made with

Air Dry Clay

Toothpicks

Tin Foil

Acrylic Paint

Fine Tip Sharpie Pen (Tip Size F)

Pink Eyeshadow

Tools used

Hands

Plastic Ruler (Measuring Ruler)

Toothpick

Paint Brush (a line brush)

Water (Too smooth it out)

Fabric Glue

Sandpaper (Grit 220)

Time it took to make? Can't remember, a few days at least. Want to make your own and need help? You can message me!

All previous WIP posts regarding this creation will now be deleted to keep my blog clean, so reblog this and like!

[bowbeforemegatron]

Next up, I tackled the eye mechanism while @8bithellscape got to work on some gnarly painting of Springtrap's ear fur. I got the eyes, and eyelids from Tioh's Moveable puppet eye file on Thingiverse and made a simple harness and some bars to hold them. I also made a platform that could be attached to Springtrap's springlock and inserted through a rear hatch in Foxy's head. I had to add some extensions to Foxy's cheeks to attach the jaw to, so it made the hatch necessary. It'll make it a lot easier to reach the electronics if anything goes wrong, though. These were all printed on the 3D printer. I also made a simple ring out of thin foam for Springtrap's eyes. It needed to be super thin to fit between the eyes and eyelid. We Plasti-dipped them to make them stronger. The teeth were painted and I added on Foxy's eyepatch with a simple hinge. He got a coat or three of shiny black spray for the eye patch and nose. While I did that, @8bithellscape started adding fur to Springtrap's head. This was accomplished by Fabri-tacing it in sections and making a few small seams as close the holes as we could manage. After it was fully wrapped, she found the holes and cut them. Most were left jagged so it looks like it wore away or was ripped as opposed to neatly tucking them in.

[bowbeforemegatron]

Next we made Springtrap and Foxy's ears. We cut the shapes out of EVA foam and glued them together with contact cement to create an outer shell. Then made pieces for the outer rim of Foxy's ear, the inner ear for Springtrap that actually sits on top, and the "metal" bars. The ear parts were wrapped in fleece and glued on with Fabri-tac. I know a lot of people recommend hot glue, but the Fabri-tac made for a strong flexible hold that took a few minutes to dry so we could still stretch the fabric as we went. For foxy, the foam metal bars were simply inserted along with some leftover soft foam from the bodies to fill the voids. I did forget to paint them before gluing them in, but took care of it later with a creative use of a grocery bag (holes in the bottom for the bars to stick out and bag protects the fabric from paint!). Springtrap's ears slide over the rods and are removable. @8bithellscape wanted the larger ear to bend, so we included a wire, toggle bolt hinges, and some PVC pipes to guide the cable. A servo in the head will pull the wire to create the bend and both heads will have ear wiggle and eye movements.

[8bithellscape]

These two cosplay wips live in our dining room area and haunt us daily. Now everyone else can stare at them too.