tplinkwifi.net : How to setup TP-link Routers?
First of all, you need to use an Ethernet Cable available with the Router in order to attach the modem to the WAN port of the TP-Link Router.
• Plug your Router to any Power source and turn it on with the help of Switch on the back.
• As per the device you are using it can be Laptop or computer, kindly connect it to the wireless network broadcast by the Router, Please be assured the default username and password is given at the bottom of your device.
• In order to access the admin login page for the router you need to open a browser and type the WEB URL — www.tplinkwifi.net in the address bar and enter.
• The user can also access the admin page by typing IP address as 192.168.1.1 instead of WEB URL.
• Enter the default username and password for the router as:
• Seems like we are done with the details, please click on login to login the Router.
• Once logged in click on next to get started.
• Type the username as per your requirement in the field given below the wireless.
• Once Network name filled, please make sure you don’t use any of your personal details as the same is visible to nearby users and devices.
• In the WPA-PSK/WPA2-PSK field, Type the new desired password for your wireless network
• Please be assured, passwords are case sensitive and you ensure to enter the strong password to make it more secure for the wireless network and difficult for hackers to hack.
• Once entered with the new password >> Click Next. >> Click Finish.
• At last, once your password is reset, you will be disconnected automatically and you need to reconnect the Router with the new credentials.
• And now your TP-Link wireless network is setup.
In order to troubleshoot the network problems, the user can also choose to
reset their router if needed.
STEPS TO RESET THE TP-LINK ROUTER:
Starting with the first step you need to use the paper clip and press the reset button mentioned at the back of the router.
Keep the Hold on the reset button for at least ten seconds.
After ten seconds release the reset button and now the TP-Link Router will restore to the factory default settings.
Once the action for Factory reset is taken it will delete all the externalize settings that include your username password, WiFi Networks, name (SSID), and security settings.
Note: Once the Restoration is processed it cannot be reversed back to the
previous stage.
In order to take the action for Factory Reset you can follow the 2 methods given below:
Method 1 ：Hard reset/By pressing the RESET button
Make sure that the Router is powered on and then press and hold the WPS/RESET button for more than 10 seconds till the time SYS LED gives a quick flash from slow flash. Once done release the button and wait for the Router to reboot to its factory default settings.
Method 2 ：By Router's Web-based Utility (management page)
Move your cursor to the management page, you can also use the Factory Defaults function. Than go to System Tools -> click on Factory Defaults” page, then click on the restore button and wait for the Router to reboot to its factory default settings.
Note:
1. Make sure that the router is powered on before it step towards restart completely.
2. Keep the things clear that the default user name and password is always “admin”(all lower case).
jacobvanloon
dailybridgerton
turnnoffyourmind