Via Scoop.it - Best RC Cars
The Savage X in kit form not preassembled so experienced R/C modelers can have the pleasure and satisfaction of building it themselves. Kits also allows owners to build the kit to their exact specifications and customize the truck by adding any option parts. HPI Savage X SS off-road Monster Truck Kit with the K4.6 Engine and clear Nitro GT-2 Body. Unassembled and requires radio system. FEATURES Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate) Drive: Four wheel shaft drive with heavy duty dogbones Engine: HPIG1501, HPI K4.6 28 cu in (4.6cc) with 2.9 horsepower with pull-starter, ABC construction, 8 port chrome plated brass sleeve for high RPM operation, lightweight aluminum piston and connecting rod, 8.5mm composite slide valve carburetor for improved high temperature tuning, glow plug, and dual stage air filter Exhaust: Dual chamber polished aluminum tuned pipe with header Fuel Tank: 5.4oz (160cc) flip top cap Clutch: Three shoe Transmission: Two-speed with adjustable slipper clutch and heavy duty metal gears Ball Bearing: Full set of rubber sealed bearings Shocks: Eight oil-filled long stroke with coil-over spring Main Gear: Steel 47 tooth Gearbox: Sealed front and rear Differentials: Four gear planetary type with heavy duty diff shafts and alloy cases Brakes: Adjustable dual vented stainless steel discs Tires: Dirt Bonz, diameter: 5.71 (145.1mm), width 3.38 (85.8mm) sticky S compound with bone shaped tread for high traction on dirt Wheels: Chrome Warlock with 17mm hex, width: 2.2 (56mm), diameter 3.3 (83mm) Body: Pre-trimmed unpainted Nitro GT-2 with pre-cut decals Bumpers: High impact nylon front and rear skidplate type Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell crank Servo Saver: Adjustable cam type for optimum steering response and extra servo gear protection Suspension: Front and rear heavy duty reinforced suspension arms uprights and knuckles, wide track (nearly 17") (432mm) design Warranty: Two year limited, valid only in USA, Canada and South America INCLUDES One HPI Savage X SS Monster Truck kit with oil shocks, K4.6 engine, clear body, decals, tires, foam inserts, 6 spoke chrome wheels 17 tooth clutch bell, 47 tooth spur gear, instructions REQUIRES Radio: 2-Channel with 1 standard servo for throttle, 1 high torque servo for steering, and 1 standard size and torque servo if the optional reverse module (HPIC8739) is purchased. *If using the optional reverse module a 3-channel radio must be used. Radio Batteries: (8) AA size Receiver Pack: 6V 5-cell hump configuration Wall Charger: For receiver pack Glow Starter: 1.2V Paint: Polycarbonate for body Misc. Items: Fuel bottle, building and track equipment Fuel: 2-stroke glow fuel with 20% nitromethane, 16% lubricant- Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection. http://www.bigdoghobbies.com/product-p/hpi861.htm
Via bigdoghobbies.com
