Welcome, everyone new! And welcome back, everyone old! :) We're so happy to have everyone.
All swaps have been assigned and a message has been sent to your preferred contact method. Please check and let us know that you've seen it. If you do not reply within a week, we may have to remove you from the event.
If you have any questions at all, please feel free to ask the mod who messaged you or the blog!
Hi just wanted to say I love the pixel art on the announcement banners this year!! All the portraits and per-character details are so fun <3
Thanks so much!! The character portraits are from the DS game and I grab other backgrounds and assets from other pixel art. It's really fun to collage them together. -mod morf (cosmicpines)
question about AUs on the signup form - it mentions "personal AUs" on additional prompts but the main section prohibits all AUs. Should generic AU ideas (e.g. mermaid!AU, coffeeshop!AU) go into additional prompts as well if the AU doesn't require additional research?
This is our bad, should have clarified it a bit better on the form, but yes generic AUs are completely fine to be a main prompt! If the Au requires the reading of a document or post(s) in order to understand the context of the prompt, then it will go into additional prompts.
Application opens: March 7
Application closes: March 29
Matching period: March 30 - April 5
Creation Period: April 6 - June 6
Posting: JUNE 7th
Rules
We have a strict no generative AI policy—it cannot be used in the creation of any gift.
Must be SFW
Please make sure you fill out everything on the form before submitting and read the rules! Some rules on the form have been updated from previous years.
If you find yourself unable to complete your piece, please let us know ASAP so we may reassign accordingly!
You may request an extension on the due date, however if your gift is not posted within the extra week we will have to reassign your gift to one of our pitch hitters.
Please keep Dm's open and available to non-friends for the duration of Code Swap. If a mod cannot find a way to contact you, you will be removed from the event without warning.
FAQ
A Tumblr account is not required to join! Twitter, Instagram, Discord, email, ect. are all welcome! We will link any gift posted off of Tumblr on to the blog, as well as deliver gifts to off site participants. If you happen to make any mailable gifts (crochet, dolls, traditional art, etc.) we will not facilitate mailing of gifts—that’ll be between you and your giftee!
To join Code: Swap, just fill out the form below and wait for contact from one of our mods (Kittygirl255, Vexfulfolly, and Cosmicpines).
We couldn't be more thrilled for another year! The support and creativity we see each year brings us so much joy, and we are incredibly excited to see what this year brings!
Virtualization Vol. II is a fan-made zine for the series Code: Lyoko. Including both authors and artists, this zine is a celebration of the series we know and love!
This project will culminate in a physical zine and merch release. There will be no profits made off this project, and any proceeds beyond what is needed for shipping and production will be donated to charity!
As of now, our interest check is open🙌
The interest check will remain open until 11:59pm PST on December 31st. That’s one month to say your piece!
The interest check will help us dictate the sort of content we’ll include in the zine, the amount of contributors we’ll look to have, as well as potential pricing and merch offerings.
We look forward to hearing from everyone! If you have any questions in the meantime, feel free to send us an ask, dm us, or comment on our posts.
Make sure to turn on our post notifications, so you never miss an update‼️
Click below to fill out our interest check!
Thank you for your interest in Virtualization Vol II! This project is planned to be a physical zine (with merch!), with a digital option ma
Hello everyone!!!!! We’re back again~ hosting a Secret Santa event again this year for Code Lyoko!
While we’re accepting participants from any website, our home ground will be here on this Tumblr blog. You don’t need to have a Tumblr to participate.
We have a form for you guys to complete to let your Secret Santa know what you may like for a gift. Make sure to read the FAQ and RULES because you never know, there might be a secret code needed to complete the form. The link to the form can be found at the bottom of the rules page, and make sure to read the rules while you’re there!
If you have any questions just sends us an ask, and for people that don’t have a Tumblr, you can email us at codesecretsanta@/yahoo.com (without the slash). If you have a Tumblr account and you want to ask a question in private, message @semie78 or @a-queenoffairys.
I completely forgot I didn't post this! This is my @code-swap gift for @semie78 ! I made a rotating tower music box! I'm very proud of how it turned out. I bought a wind up music box online. Then, I designed a base with 3D printed bearings (roughly inspired by these, but fairly modified) that screws into the music box wind up. When the music box rotates, it spins the entire tower. I also made sure that the base unscrews from the top so you can replace any parts as needed. A keen eye may notice that it screws in backwards. Uh... oopsies!
The music box itself plays A World Without Danger (video should have sound, might be kind of quiet)....... kind of. I used this amazing tool and modified this midi to 3D print a new tube for the box. Unfortunately, there are only so many notes on a music box, and I had to sacrifice it being in tune for it working... alas... Many lessons learned, haha.
Was a ton of fun! I love designing and making things. Happy to chat more about the mechanical design with anyone who is interested. Some pictures of the CAD and design thoughts under the cut.
I ended up chopping off most of the threads from this. I went waaay overboard and the friction got too much that it couldn't screw in all the way. I also made a mistake that I'm showing here -- the bottom opening thread needs to be accessible by the top inserting thread. Cutting it solved this, but if I were to make it again, I'd fix that.
The original design of this also had little Lyoko Warriors that would move around the outside, but I ended up deciding to simplify it. Maybe someday...
This part isn't very interesting. The music box itself is screwed into those holes, and the threads screw into the top.
Here's the cool part: the base! There is a circle of bearings on the inside that 3D print as one part (even if they're a pain to get the supports out of, oh my god). The center of the "wheel" is where you screw in the crank for the music box. I tried 3D printing the threads, but my printer couldn't get it that fine, which wasn't surprising, so I did it by hand.
This is the music box tube, as generated by the code up there. A PLA 3D print won't last forever (as you can see I have a few extras in there for semie). A more permanent solution would be to make the tube with indents or holes instead of out outcroppings and then put little metal pins in there. Another option would be to resin print it, but, alas, I didn't have access to a resin printer.
This music box didn't have an E!! I was able to but the theme into a key/octave such that the repeating notes could be on two different spots that played the same note, but no E!!! Augh!!! I tried so hard to make it still sound right... definitely sounds better on my computer than on the box. That might have been my fault: the first step to using the tool is to identify all the notes on the music box. My fiancee and I tried our best, but we definitely could have gotten a few wrong. Still, I'm pleased the song was distinguishable at all.
CLAWS UP FROM THE EDGE OF A CLIFF. i'm alive. and I'm late and I'm EXTREMELY sorry. but better late than never!!!!!!!!!
hi @coldbrewblooded hi Astral <3 it's me, your @code-swap bestie.
ok so one of your prompts was about the XANA monsters doing something "normal" in the real world and I just immediately got the image of that subway rat in new york hauling a whole piece of pizza down a flight of stairs, which is extremely specific. however i cannot help but see kankrelats as some kind of mix between an ant and a rat. ants if they were big enough to cause rat problems, if you will.
anyway i sure hope no one was planning on enjoying a nice pizza today because Mango and a friend are making off with it.
pov weird bugs steal your dinner and only one is even guilty about being caught