Untitled

[daisyjewelry]

Beebeecraft Tutorial on How to DIY Glass Beaded Crystal Bracelets with Golden Chains

Love beaded crystal bracelets? This Beebeecraft tutorial will show you a DIY glass bead bracelet, hope you can get some inspirations on how to make glass bead bracelet.

This project is a DIY glass bead bracelet with golden twisted chain, which is quite easy in appearance, and you can make it within a quite short time even you are a green hand, so do you wanna have a try? Follow me to see together~

 Jewelry craft supplies for making beaded crystal bracelets:

8mmClear Abacus Electroplate Crystal Glass Beads

Transparent Fishing Wire

Golden Twisted Chain

Silver Slide Lock Clasps

Jewelry Tool Supplies

Needle Nose Pliers

Scissors

Instructions on how to make glass bead bracelet:

Step 1: Make the first beaded strand

1st, cut a piece of fishing wire, with a length about 210cm, then fold it in half and tie it to the first hole of a slide lock clasp;

2nd, slide 3 abacus glass beads to the wire, then add 2 short pieces of twisted chain to it;

3rd, continue to add more glass beads and twisted chains to the wire alternatively as pictured till the length of the bead strand is enough to you;

4th, tie the wire to the other side of the lock clasp.

Step 2: Make the second glass beads strand

1st, cut another piece of fishing wire with a length about 210cm, fold it in half and tie it to the middle hole of the lock clasp;

2nd, slide 3 clear glass beads to the wire and cross it through the chains, then add 3 clear glass beads to the wire;

3rd, continue above processes to finish the second glass beads strand and tie the wire to the clasp as pictured.

Step 3: Finish the DIY glass bead bracelet

Repeat the step 2 to make the 3rd beaded strand of this glass beads bracelet.

Here is the final look of the beaded crystal bracelet.

Now this DIY glass bead bracelet is finished quickly, how do you like it? For me, I like crystal beaded bracelets so much that I will try to make another one with pink crystal glass beads, and do you wanna join me and have a nice try?

[daisyjewelry]

Beebeecraft DIY- How to Make Tibetan Style Feather Pendant Necklace with Drop Glass Beads

Today, I am going to show you a Beebeecraft DIY on how to make Tibetan style feather pendant necklace with drop glass beads, hoping you will like it.

Do you like Tibetan style necklaces? And how do you feel about Tibetan feather pendant necklace? If you exactly like this kind of necklace, you should never miss this original project about how to make Tibetan style feather pendant necklace with drop glass beads. Follow me to try it!

 Jewelry craft supplies for this Tibetan style leaf and feather pendant necklace:

Antique Bronze Feather Tibetan Style Links                                                                          

Costume Accessories                

Antique Golden Handmade Alloy Chain                                        

Antique Bronze Brass Bar & Ring Toggle Clasps          

0.5mm Camel Copper Jewelry Wire                        

Antique Bronze Jump Rings                            

Antique Bronze Headpins                                

Antique Bronze Eye pins

Jewelry Tool Supplies                                

Side Cutting Pliers                              

Flat Nose Pliers                                  

Round Nose Pliers     

Instruction on how to make Tibetan style feather pendant necklace:

Step 1: prepare the drop glass beads dangles

1st, slide a 15x10mm drop glass bead onto a headpin and make a loop at the end to make a dangle;

2nd, make another three drop glass beads dangles in the same ways.

Step 2: make the basic part of the Tibetan style feather pendant necklace

1st, slide a 6x4mm red glass bead onto an eye pin, then make a loop and cut off the extra part;

2nd, cut off a piece of 0.5mm copper wire and wrap it around the blue feather for many circles, then make a loop;

3rd, attach the red dangle onto the feather pendant (as shown in the picture).

Step 3: finish the Tibetan style feather pendant necklace

1st, connect the four drop glass beads dangles onto the Tibetan feather link by jump rings, then attach the blue feather pendant onto the middle part;

2nd, connect the feather pendant with a piece of handmade alloy chain by antique bronze jump rings;

3rd, attach the Tibetan style toggle and tbar onto the ends to finish this necklace making.

Here is the final look of the Tibetan style feather pendant necklace:

Now, guys, how do you think of this cool pendant necklace? Do you have any great ideas about this necklace making? Then just follow the Beebeecraft Tutorials and  add you thoughts into your jewelry making. Have fun!

[daisyjewelry]

Wanna make some handmade couple rings for the coming Valentines’ Day? This tutorial will share a couple of DIY wire wrapped rings to you all. Hope you’ll like them~

This couple of DIY wire wrapped rings is quite easy to make for both green hands and professionals, so if you are searching for some special presents for your lover, then this tutorial on how to make wire wrapped rings will be a good choice for you!

 Jewelry craft supplies you’ll need in DIY wire wrapped rings:

1.5MM Silver Aluminum Wire

0.5 MM Silver Copper Wires

6x6x5MM Acrylic Rhinestone Beads

Jewelry Tool Supplies

Round Nose Pliers

Needle Nose Pliers

Side Cutting Pliers

White Glue

Instructions on how to make wire wrapped rings:

Step 1: Make a basic wire knot

1st, cut 2 pieces of aluminum wire and fold then in half, then make a knot with the 2 pieces of wire as pictured;

2nd, cut 2 short pieces of copper wire and wrap them to both sides of the aluminum wires, then cut off the excess wires.

Step 2: Finish the DIY wire wrapped rings

1st, twist the aluminum wire pattern into a ring shape and make a loop at both ends of it;

2nd, cut 2 short pieces of copper wire again and wrap them to both ends of the ring as pictured;

3rd, add a red acrylic rhinestone bead to middle of the ring with glue.

Here is the final look of the handmade couple rings.

I make 2 handmade couple rings as picture show to you, do you like them? You can make such 2 handmade couple rings for the coming Valentines’ Day. Have a nice try~

This project is inspired from Beebeecraft.

[daisyjewelry]

Beebeecraft Tips on How to Make Tibetan Style Chandelier Leaf Dangle Earrings with Red Pearl Beads

Do you like chandelier earrings? Then this Beebeecraft tutorial on how to make Tibetan style chandelier leaf dangle earrings with red pearl beads should be a great choice for you.

You must have seen many beaded chandelier earrings in our website, which one do you like more? Now, I am also going to show you a tutorial on how to make Tibetan style chandelier leaf dangle earrings with red pearl beads. Are you curious about how to make them in detail? Then let’s see the steps together.

Craft supplies for jewelry making this pair of chandelier leaf dangle earrings:

4mm Red Glass Pearl Beads                                      

Golden Tibetan Style Chandelier Components                    

Golden Leaf Alloy Jewelry Findings                                  

Golden Eye pins                                            

Golden Ball Headpins                                      

Golden Earring Hooks

Jewelry Tool Supplies                                

Round Nose Pliers                                

Side Cutting Pliers 

  Instruction on how to make Tibetan style chandelier leaf dangle earrings:

Step 1: make the basic part of the chandelier leaf dangle earrings

1st, slide a 4mm red pearl bead onto a headpin, then make a loop at the end;

2nd, attach the pearl dangle and a golden leaf together, then hang it onto the chandelier link;

3rd, make another five pearl dangles, then hang them onto the chandelier component.

Step 2: finish the chandelier leaf dangle earrings

1st, connect two leaf pendants onto the chandelier links (as shown in the picture);

2nd, add a golden earring hook onto the chandelier component to finish this earring making;

3rd, make another same one with the same steps.

Check the final look of the chandelier leaf dangle earrings:

 They have been finished within two steps, so simple, right? Now, do you want to make one pair for yourself? Hope you can get any inspiration from this post and design your own one. Then do not forget to share it with us. See you!

This project is inspired from Beebeecraft

[daisyjewelry]

Beebeecraft Tutorials on How to Make a 2-Strand Necklace with Purple Stone Pendant and Flower Dangle Pendant

Do you wanna make stone pendant necklace? Here I will show a 2-strand necklace with gemstone pendant and flower dangle pendant to you guys, hope you’ll like it~

There are 2 layers in this purple stone pendant necklace, one is short and the other one is a little long, and I wear the suede cord necklace with a tattoo choker necklace which was made before, how do you think them? If you also love the DIY drop pendant  necklace, follow me to have a nice try!

 Jewelry craft supplies for making the purple stone pendant necklace:

Flower Enamel Dangle Jewelry Findings

Black Faux Suede Leather Cord

Bullet Synthetic Gemstone Pendants

Silver Jump Rings

Silver Magnetic Clasps

Silver Ribbon Crimp Ends

Needle Nose Pliers

Instructions on how to make pendant necklaces:

Step 1: Add pendant to the suede cord

1st, cut 2 pieces of black suede cord, one is short and the other one is a little long;

2nd, add a flower dangle pendant to the short suede cord and add a purple stone bullet pendant to the long suede cord.

Step 2: Finish the black suede cord necklace

1st, put the 2-strand necklace together and add a crimp end to both ends of the necklace;

2nd, add a jump ring to one end of the necklace while add a jump ring and a spring ring clasp to the other end of it as pictured.

 Here is the finale look of the purple stone pendant necklace.

I put the tattoo choker necklace with this 2-strand necklace together, and I love combination so much, how do you think of it? It is so easy to make them that you can make them with a quite short time! Why not have a try now?

This project is inspired from Beebeecraft.

[daisyjewelry]

Beebeecraft Tips on How to Make Cool Black Leather Cord Bracelet for Men

In this article, I will show a DIY project for Valentines’ Day gift – how to make black leather cord bracelets for men. Have a nice check!  

Are you seeking for Valentine’s Day gift ideas? Today I will show you an easy DIY leather cord bracelet for your boyfriend! The cool design will make him happy. Let’s see the details here.

 Jewelry craft supplies for making the cool black leather cord bracelets for men:

4mm Black Leather Cord

Brass Folding Cord Ends

Iron Jump Rings

0.5mm Copper Wire

Iron Ending Clasp

Tibetan Silver Round Beads

Tibetan Silver Tube Beads

Iron Lobster Clasp

Jewelry Tool Supplies

Scissors

Round Nose Plier

Long Nose Plier

Side Cutting Plier

Instructions on making the black leather cord bracelet for men:

 Step 1: Make the first leather cord bracelet

 1st, cut a piece of 4mm black leather cord (about 15cm), attach a brass folding cord end to each end of the leather cord respectively;

2nd, snip off 2 pieces of short 0.5mm copper wire, then tie and wrap the wires around the folding cord end as shown;

3rd, connect the cord ending clasp with 2 jump rings and a tibetan tube bead as shown;

4th, attach a cord ending clasp to the other ends of the leather cord respectively, then connect them with jump rings and a lobster clasp.

Step 2: Make the second leather cord bracelet

 1st, cut a piece of 35cm black leather cord, slide a tibetan silver round bead to the middle of it, then tie a knot;

2nd, slide a another tibetan silver bead to the other side of the knot;

3rd, attach a ending clasp to each end of the leather cord;

4th, connect the leather cord bracelet with jump rings and a lobster clasp.

Allow me to show you the final look of the black leather bracelets for men!

This cool black leather cord bracelet is done within 15 minutes! Great trial, isn’t it? With simple supplies, this bracelet is cost-efficient for those who are on budget. Beside, you can adopt other beads you like on the cord, it is up to you! Will you try?

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Square Drop Earrings

Today I going to show you how to make a pair of glass beaded square drop earrings. The detailed steps are listed below.

Bugle beads are frequently used in jewelry making, and they are popular because of their shaping functions. Today I chose black bugle bead, purple and transparent glass beads and gemstone bead to make this pair of glass beaded square drop earrings. Follow me to see how.

 Jewelry craft supplies in making the glass beaded square drop earrings:

 6mm Purple Faceted Crystal Glass Beads

4mm Transparent Crystal Glass Beads

12mm Red Gemstone Beads

25mm Black Bugle Beads

2mm Red Glass Seed Beads

Silver Earring Hooks

Iron Headpins

10x15mm Black Glass Drop Beads

0.3mm Tiger Wire

Scissors

Round Nose Plier

Instructions on making the glass beaded square drop earrings:

 Step 1: Make a square pattern

 1st, cut a piece of 0.3mm tiger wire (about 70cm), thread it through 4 25mm black bugle beads and 3 4mm transparent glass beads alternatively, and then cross the wires through a 4mm transparent glass bead and tighten;

2nd, thread each wire through a black bugle bead and the transparent bead at the corner, then repeat this until you finish the second square pattern and tighten the wire.

Step 2: Add the last layer and transparent bead ornaments

 1st, thread each wire through 2 4mm transparent glass beads and then thread through the black bugle bead respectively;

2nd, thread the wire through 2 transparent glass beads again respectively and then thread through the black bugle bead, finally tighten the wire.

Step 3: Add ornaments in the center of the square pattern

 1st, combine the 2 wires, thread then through a 4mm transparent glass bead, then separate them by threading each wire through a 6mm purple glass bead and tighten up;

2nd, thread each wire through 3 purple bead and 3 red glass seed beads alternatively, and finally cross them through a purple glass bead and tighten up;

3rd, combine both wires and thread them through a 4mm transparent glass bead, then separate the wires by crossing them through the transparent glass bead in the corner of the square pattern and trim off the wire.

 Step 4: Add a black glass drop dangle

 1st, thread the headpin through a black glass drop bead, then twist a little loop in the end of the headpin;

2nd, hook the dangle to the bottom of the square pattern, then attach an earring hook on the top as shown.

Step 5: Add a bud for the purple glass ornament

 1st, cut a short piece of tiger wire, then thread it through the 6mm purple glass bead;

2nd, thread both wires through a 12mm red gemstone bead, then cross the wires through the purple glass bead under it;

3rd, thread along the wires to make sure the bud is fixed and trim off the excessive wires in the end.

Time for the final look of this pair of beaded square drop earrings!

This pair of glass beaded square drop earrings has simple design, but unique personality. The colors red and black match perfectly, and the glass bead add bling element to highlight the charms. It’s not difficult to make this pair of earrings, so have a try!

[daisyjewelry]

Beebeecraft Tips on How to Make Large Hoop Earrings with Silver and Gold Beaded Tassels

In this article, you will see a detailed instruction on making a pair of large hoop earrings with silver and gold beaded tassels.

With seed beads and glass bicone beads available, you can actually try this pair of large hoop earrings with silver and gold beaded tassels. The steps are really easy and you can make them out within 20 minutes even for green hands. Now let’s check the steps together.

 Jewelry craft supplies in making hoop earrings

6mm Gold Crystal Glass Beads

2mm Silver Glass Seed Beads

2mm Silver Glass Bugle Beads

0.3mm finished jewelry String

Earring Hooks

Jewelry Tool Supplies

Scissors

Instructions on making the large hoop earrings with silver and gold tassels:

 Step 1: Bead 2 ring patterns

1st, cut a piece of 75cm tiger wire, thread it through 2 2mm bugle seed beads, a gold bicone glass beads, 10 2mm silver bugle seed beads, a gold glass bead and 2 silver bugle beads in sequence;

2nd, cross both ends of the wire through a 2mm silver bugle bead and tighten up;

3rd, thread each wire through a gold glass beads, 3 silver bugle beads, a gold glass bead, 3 silver bugle beads one by one, then cross both wires through a gold glass bead and tighten.

Step 2: Add tassel adornments

 1st, thread the wires through along the beads to the 2nd silver bugle bead respectively as pictured;

2nd, thread one wire through 4 2mm silver bugle beads, a gold glass bicone bead and a 2mm silver seed bead in sequence, then thread the wire backwards through the beads until the 3rd bugle bead on the 2nd ring pattern;

3rd, thread the wire through 5 bugle seed beads, a gold glass bicone bead and a silver seed bead, then thread it backward through the beads until the next bugle bead on the ring pattern as shown;

4th, repeat this beading pattern and do remember to add a bugle seed bead in every tassel adornment.

Step 3: Finish the large hoop earrings with beaded tassels

Attach the earring hook to the top of the ring patter, and then continue with the other earring to make a set.

This is the final look of this the hoop earrings with beaded tassels.

There are many handmade earrings designs on this site and they vary from easy to difficult. If you decide to make a pair of earrings, then you can go to the referral and pick the best design and have a try. Hundreds of earrings designs are waiting for you!

[daisyjewelry]

Beebeecraft Tips on How to Make a Pink Leather Bracelet with Glass Beaded Ball Ornaments

Do you love leather bracelet? Today’s DIY project from Beebeecraft is about making a pink leather bracelet with glass beaded ball ornaments for girls. Hope you admire it!

Leather bracelets are cool and stylish with different ornaments on. Today I’m going to show you how to make a pink leather bracelet for girls. If you want to make some easy and personalized bracelets to wear, and then check this one, it won’t let you down!

Jewelry craft supplies in making the pink leather bracelet with glass beaded ball ornaments:

6mm Pink Crystal Glass Beads

4mm Silver Round Jewelry Bead Spacers

Pink Leather Cord

Brass Bolt Spring Ring Clasp

Cord Ending Clasp

Silver Iron Jump Rings

Lobster Clasp

0.3mm Tiger Wire

Jewelry Tool Supplies

Scissors

Long Nose Plier

Instructions on making the pink leather bracelet with glass beaded ball ornaments:

 Step 1:  Bead the basic unit pattern

 1st, cut a piece of 0.3mm tiger wire (about 30cm), thread the wire through a pink glass bead, a silver bead spacer and a pink glass bead;

2nd, cross both ends of the wire through a bead spacer and tighten;

3rd, thread each wire through a pink glass bead and cross them through a bead spacer and tighten;

4th, you’ve beaded 2 basic unit patterns so far.

Step 2: Finish the pink glass beaded ball

 1st, follow the procedures in step 1 and bead one more basic unit;

2nd, thread each wire through a pink glass bead, then cross then through the first bead spacer on the first pattern and trim off the wire;

3rd, make 2 more pink glass beaded balls in the same way.

Step 3: Add ornaments on the pink leather cord

 1st, cut 2 pieces of 25cm pink leather cord and thread both leather cords through 3 pink glass beaded balls;

2nd, pick 10 silver tibetan bead spacers and thread them through the leather cord in sequence as pictured.

Step 4: Finish the pink leather cord bracelet

1st, prepare an ending clasp, 2 cord ending clasps and 2 iron jump rings;

2nd, attach the cord ending clasps on the ends of the leather cord, and then connect the ends with jump rings and spring ring clasp.Here is the final look of this pink leather cord bracelet with glass beaded ball ornaments.

  The pink glass beaded ball ornaments on this leather bracelet add charms to show off. Also you can make the glass beaded ball a pendent for a leather necklace to make a set! Worth a try!

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Glass Stranded Necklace with Butterfly and Beaded Long Pendant

Do you love long glass stranded necklace? In this article, Beebeecraft tutorial will show you a glass necklace with butterfly and long pendant design.

Today I made a long pendent necklace with glass beads, pearl beads and gold spacers. As you can see from the picture, I added a butterfly link to hang the long beaded pendent. It seems that this necklace is difficult to make, while if you follow my instructions to try, it would be easy.

 Jewelry craft supplies in making the glass stranded necklace  6mm Green Faceted Glass Beads

8mm Transparent Faceted Glass Beads

3mm Gold Jewelry Bead Spacers

8mm White Glass Pearl Beads

4mm White Glass Pearl Beads

10mm White Glass Pearl Beads

2mm Gold Brass Seed Beads

Iron Jump Rings

Iron Eye Pins

Iron Headpins

0.3mm Tiger Wire

Iron Bead Tips

Jewelry Tool Supplies

Tibetan Gold Butterfly Link

Round Nose Pliers

Side Cutting Pliers

Scissors

Instructions on making the glass stranded necklace with butterfly and beaded long pendent:

 Step 1: Bead the necklace strand

 1st, snip off a piece of 0.3mm tiger wire (about 100cm), fold it into halves and attach a clasp on the middle;

2nd, thread one wire through a 2mm gold seed bead and a 6mm green faceted glass bead while the other wire through a gold seed bead and a 4mm white pearl bead, then cross the wires through a 3mm gold bead spacer and tighten;

3rd, thread a gold seed bead, a 4mm white pearl through the lower wire in the picture, thread a seed bead and a 6mm green glass bead through the other wire, and then cross both wires through a 3mm gold bead spacer and tighten; (You’ve beaded the basic necklace strand pattern so far)

4th, repeat above procedures to make more patterns and stop when you reach a proper length;

5th, cross the wires and attach a bead tip on, and trim off the excessive wires.

Step 2: Add the gold butterfly link

 1st, prepare 2 eyepins, 2 8mm white pearl beads, and 4 gold seed beads;

2nd, thread each wire through a gold seed bead, a 8mm white pearl beads and a gold seed bead in sequence respectively;

3rd, cut the excess headpins, and twist a hoop on each each of the eyepins;

4th, attach a jump ring to each side of the butterfly link, and then connect it to the bead tips on each end of the necklace strand.

Step 3: Add long beaded pendant

 1st, prepare 3 iron headpins and 7 iron eyepins;

2nd, thread each headpin through a 10mm white pearl bead and 2 8mm transparent glass beads;

3rd, thread each eyepin through a 6mm green glass bead, a 8mm white pearl bead and a green glass bead in sequence respectively;

4th, connect the dangles as shown in the picture and finish the necklace.

I’m quite satisfied with this glass necklace with butterfly and long beaded pendant design! It works out so charming!

Have you been attracted by this charming long pendent necklace? Glass beads and pearl beads usually match perfectly in jewelry making. Of course, you can change the green glass beads into other colors if you like. Have a good try fellow the Beebeecraft tutorial ! 　

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Large Pendant Necklace with Pearl and Glass Beads

This beaded large pendent necklace is a little complex to make. Now check the detailed steps below to find out how to make it.

 There are many beaded pendent necklace designs on this site, but today I will introduce you another complex pendent necklace. As you can see from the picture, the most important part is the pendent. It is made of several kinds of beads and I use the yellow bugle seed beads and blue seed beads to add charms. Let’s see how to make this beaded large pendent necklace with pearl and glass beads.

 Supplies needed in making the beaded large pendent necklace:

6MM White Glass Pearl Beads

12MM Yellow Glass Pearl Beads

6MM Transparent Faceted Glass Beads

8MM Black Glass Beads

6MM Black Gemstone Beads

3MM Blue Glass Seed Beads

2MM Yellow Bugle Seed Beads

Black Glass Drop Bead

0.45mm Tiger Wire

Iron Jump Rings

Jewelry Tool Supplies

Lobster Clasp

Iron Headpin

Long Nose Plier

Round Nose Plier

Scissors

Instructions on making the beaded large pendent necklace:

 Step 1: Bead a large hoop

 1st, snip off a piece of 0.45mm tiger wire (about 100cm), then thread one end of the wire through a 8mm black glass bead, a 6mm transparent faceted glass bead, a 8mm black glass bead and 2 6mm white pearl beads in sequence;

2nd, thread the other end of the wire through the first black glass bead and tighten;

3rd, add a 6mm transparent glass bead to the left wire, and 2 6mm white pearl beads plus a 8mm black glass bead to the right wire respectively;

4th, thread the left wire through the black glass bead on the right wire and tighten;

5th, repeat above beading pattern and finish the whole beaded hoop in the end.

Step 2: String blue seed beads ornaments

1st, reserve one wire, then thread the other wire through the black glass bead and white pearl bead as shown;

2nd, thread the wire though a blue seed bead, then the white pearl bead, then add a blue seed bead again, repeat this way and string the blue seed beads ornament as pictured.

Step 3: Add yellow bugle beads embellishment

 1st, thread the other wire through the black glass bead, then thread it through 8 2mm bugle beads through the wire;

2nd, thread the wire through the next black glass bead from the inner side to the outer side;

3rd, thread 8 yellow bugle seed beads to the wire again, then thread the wire trough the next black glass bead;

4th, string yellow bugle seed beads and do the same thing as the above 4 steps and finally it will end up like this.

Step 4: Finish the large beaded pendent

 1st, prepare 2 iron headpins, and thread a black glass drop bead and a 12mm yellow pearl bead through them respectively;

2nd, make loops at the ends of the headpins, then attach the yellow pearl dangle to the joint between the transparent faceted glass beads and make it the center of the pendent;

3rd, hook the black glass drop bead to the pendent.

Step 5: Bead a black and white necklace strand

 1st, snip off a piece of 0.45mm tiger wire (about 50cm), thread it through 3 6mm white pearl beads and a black gemstone bead;

2nd, thread the right wire through the first pearl bead and tighten;

3rd, thread 2 white pearl beads to the left wire and a black gemstone bead to the right wire, then thread the right wire through the last pearl bead you just added;

4th, repeat this beading pattern and finish the black and white necklace strand and trim off the extra wire.

  Step 6: Add yellow bugle beaded patterns  

 1st, snip off a piece of 35cm tiger wire, mark the 1/4 of the whole strand, then thread the wire through the 6mm white pearl bead,

2nd, then thread each end through 5 yellow bugle seed beads, and cross them through the next pearl bead as pictured;

3rd, add the bugle cross ornament on the rest strand, and stop at the another symmetric point and finally trim off the extra wire.

Step 7: Finish the whole beaded large pendent necklace

 1st, snip off a piece of short tiger wire, and then thread it through a blue seed bead;

2nd, thread each side of the wire through the black gemstone bead respectively;

3rd, thread the wire through the beads and tie to the joint;

4th, attach jump ring to each end of the necklace strand, and connect them with a lobster clasp.

With time and efforts, I made this beaded large pendent necklace!!

This beaded necklace with pendant requires some beading skills and basic stringing skills to make. If you are interest in this large pendent necklace design, you can try yourself to make one by following my tutorial. Besides, if you come across any problems when making this beaded pendent necklace, just feel free to contact us.

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Cross Earrings

This Beebeecraft tutorial is about how to make a pair of glass beaded cross earrings. Follow the steps below and have a try.

This is a pair of earrings with beaded cross design. I pick some red and blue glass beads, plus some gold bead spacers to make them. As you can see from the picture, the supplies are simple. Now check my steps below to see how to make this pair of beaded cross earrings.

 Jewelry craft supplies in making the glass beaded cross earrings:

 6mm Red Faceted Crystal Glass Beads

6mm Blue Faceted Crystal Glass Beads

3mm Gold Bead Spacers

0.38mm Jewelry String

Jump Rings

Silver Earring Hooks

Long Nose Plier

Scissors

Instructions on making the glass beaded cross earrings:

Step1：Bead a clover pattern

1st, snip off a piece of 0.38mm tiger wire (about 50cm), thread it through 5 3mm gold bead spacers and a 6mm red faceted glass bead;

2nd, thread the left wire through the red glass bead and tighten;

3rd, slide a red glass bead and 5 gold spacers to the right wire, then thread the wire through red glass bead you just slide;

4th, repeat this procedure and make 2 more patterns, and it finally ends up like what is shown in the picture.

 Step 2: Add cross patterns

 1st, slide 4 gold spacers, a 6mm blue faceted glass bead, a gold spacer and a blue glass bead in sequence to the right wire, then thread the wire through the 3rd and 4th gold spacer that you just added;

2nd, thread the wire through another gold spacer and then thread through the first gold spacer bead on the string and tighten;

3rd, thread the other wire through the gold spacers to the next stop as shown, then thread 4 gold spacers, a blue glass bead, a gold spacer and a blue glass bead again, then repeat the steps in above procedures to make the rest cross patterns.

Step 3: Add blue glass bead fringe ornaments

 1st, thread the wire through the beads to the 2nd gold spacer on the cross pattern, then add a blue glass bead on the wire;

2nd, thread the wire through the top gold spacer on the next clover pattern, add a blue glass bead again and tighten;

3rd, thread the wire through the 2nd gold spacer on the next cross pattern, then add a blue glass bead and tighten;

4th, repeat above procedures to add rest blue glass bead ornament in sequence and finally trim off the extra wires.  

Step 4: Finish the glass beaded cross earrings

1st, attach a jump ring by threading it through the gold spacer on the top, then hook a silver earring hook with a plier;

2nd, repeat the whole process to make the other earing to make a set.

Show you the final look of my glass beaded cross earrings:

Do you love this beaded cross design? This pair of glass beaded earrings can be worn in any occasions. Of course you can use other color matching in making them. Have a pleasant try if you love them!

[daisyjewelry]

Beebeecraft Tutorials on Making a Pair of Sweet Earrings

This Beebeecraft tutorial will show you some special tips about how to make a pair of sweet earrings. Small and cute earrings are extraordinarily suitable for summer, and they are suitable for girls. As you known, pink gemstone beads is popular for making jewelry, especially earrings. This is because the gemstone beads are very textured and glamorous. Pink gemstone beads extremely make you shiny and playful.

Via making your own gemstone beaded earrings, you can create items that actually accord to your personal preference and add sparkles to any outfit as much as you’d rather to. Once you master the skills for major craft jewelry ideas, you can make them easily at home. What’s more, you can also wear them, give to friends as special gifts or even sell them.

 Jewelry craft supplies needed to make the sweet earrings:

10mm Jade Beads

2mm Glass seed beads

18mm Iron Sliver Earring Hooks

0.2mm Thread Nylon Wire

4~10mm Brass Jump Rings

Flat Nose Pliers

Cutting Pliers

How to Make the Sweet Earrings:

Step1: Secure beads in a wire

1st, slide a pink gemstone beads and a white seed bead in turn, and their number both three eventually;

2nd, slide three seeds bead between the two glass beads.

Step2: Finished the sweet earrings.

1st, slide a white seed bead between the pink beads;

2nd, connect the jump ring in a seed bead which is placed in the middle of the seed beads;

3rd, attach an earring hook to the jump ring.

The final look of the sweet earrings:

Wow! How beautiful and cute earrings. These tips are easily to learn and just spend your little time. Fellow the steps above and you can easily have a pair of sweet earrings made by yourself.

[daisyjewelry]

Beebeecraft Tips on How to Make a Pair of Bridal Chandelier Earrings with Pearl and Glass Beads

This is a bridal jewelry DIY project on making a pair of bridal pearl chandelier earrings. The detailed steps are listed below.

Are you searching for handmade bridal jewelry ideas? My tutorial is exactly what you want! With pearl beads and glass beads, I made a pair of elegant bridal chandelier earrings, which is a good choice for brides to wear on wedding day. Now follow my tutorial to see how to make the pearl drop earrings for wedding.

 Supplies in making the pearl chandelier earrings with glass drop:

 10mm White Glass Pearl Beads

6mm White  Glass Pearl Beads

4mm White Glass Pearl Beads

15x10mm Pearl Drop Beads

15x10mm Glass Drop Beads

8mm Transparent Glass Beads

3mm Gold Beads Spacers

2mm Yellow Bugle Beads

0.38mm Tiger Wire

Brass Rhinestone Beads Spacers

Tibetan Bead Cap

Gold Earring Hooks

Jewelry Tool Supplies

Step 1：Make the starting part of the chandelier earring

1st, snip off a piece of tiger wire (about 50cm), then fold it in halves and tie a knot to the gold earring hook and tighten;

2nd, separate the 2 wires by sliding 7 2mm yellow bugle beads on each, and them cross the wires through a 10mm white pearl bead;

3rd, slide 6 gold bead spacers to one wire, and thread the wire through the 10mm white pearl bead again and tighten up.

Step 2: Make the main part of the chandelier earring

 1st, slide a 15x10mm white pearl drop bead, a 2mm yellow bugle bead, a 4mm white pearl bead, a 2mm yellow bugle bead and a white pearl drop bead again in order;

2nd, cross and tie the wire to the joint between the 2nd and the 3rd gold spacers as shown;

3rd, slide a 2mm yellow bugle bead, a 4mm white pearl bead, a 2mm yellow bugle bead and a white pearl drop bead again, then cross and tie the wire to the joint between the 3rd and 4th gold spacer;

4th, repeat above pattern and finish the main part of the chandelier earring.

Step 3: Add out layer pearl ornaments

 1st, thread the wire along the way to the 2nd yellow bugle bead on the left;

2nd, slide 2 2mm yellow bugle beads, a 6mm white pearl bead and 2 2mm bugle beads on the wire, and thread the wire through the next bugle bead on the primary layer and tighten;

3rd, thread the wire upward through along the drop pearl bead, the gold spacer and the next drop pearl bead again and then down to the bugle bead on the left;

4th, slide 2 2mm bugle beads, a 6mm white pearl and 2 yellow bugle beads again, and thread the wire through the next yellow bugle bead on the inner layer;

5th, repeat above beading pattern as for the right part, and finish the outer layer pearl ornaments.

Step 4: Add a glass drop for the chandelier earring

1st, when you finish the step 3, the wires are separated through the 2nd and 3rd pearl bead, then slide 9 yellow bugle beads to each wire, and cross both wires through a gold bead spacer;

2nd, add a 6mm white pearl, a brass rhinestone spacer, a gold Tibetan bead cap, a 8mm glass bead, a gold spacer, a 15x10mm glass drop bead and finally a yellow bugle bead respectively;

3rd, tighten up the wire and trim off it to finish the pearl chandelier earring with glass drop.

Time for the final look! They are extremely elegant!

I finish this pair of bridal chandelier earrings within half an hour and I believe that you can also finish them in a short time by following the steps I listed. If you happen to be a bride-to-be, or if you have friend who is a bride-to-be, then it is highly suggested to make this pair as gift for yourself or your friends!

[daisyjewelry]

Beebeecraft Tips on Making a Gold Foot Chain and Anklet with Toe Ring

This is an easy DIY project on making a gold foot chain and anklet with toe ring. It is a good choice for green hands to try!

With aluminum wire and chains available, I can make many easy crafts at home. Today I bring another easy handmade craft to you! This is a foot chain and anklet with toe ring, which is so simple that only took me 10 minutes! Now follow me to see how to make it.

  Jewelry craft supplies in making the gold foot chain and anklet with toe ring:

12mm Orange Jade Beads

12mm Green Jade Beads

2mm Gold Aluminum Wire

Gold Jewelry Making Chain

Gold Jump Rings

Brass Rhinestone Beads

Gold Headpin

Gold Magnetic Clasps

Long Nose Pliers

Side Cutting Pliers

Round Nose Pliers

Scissors

Instructions on making the gold foot chain and anklet with toe ring:

 Step 1: Make a gold chain anklet

 1st, snip off 2 pieces of gold twisted chain (about 15cm), attach a jump ring to each end of the 2 chains and then connect them with a gold jump ring;

2nd, connect the other ends with a gold lobster clasp.

Step 2: Add beads ornaments

 1st, snip off 3 pieces of short gold chain(about 3cm) and attach them to the jump ring one by one;

2nd, prepare 3 gold headpin, and thread a heart bead to one of them, and thread a green jade bead, a rhinestone spacer to another headpin, and at last, thread an orange jade bead and a rhinestone spacer to the third headpin;

3rd, make hoops at the ends of the headpin;

4th, hook them to the end of the short chain respectively.  

Step 3: Twist a toe ring

 1st, snip off a piece of gold aluminum wire (about 20cm) and firstly twist snail loop;

2nd, wrap the aluminum wire around your toe (or your finger) as shown;

3rd, make a small snail tail in the end;

4th, snip off a piece of gold chain (about 30cm) and attach the toe ring to the chain with a jump ring.

This is the final piece of the gold foot chain and anklet with toe ring!

After reading my tutorial, I believe you will agree that this handmade foot chain craft is easy to try. Gold chains and gold aluminum wires are commonly used in jewelry making, and they can develop many jewelry crafts. This DIY foot chain and anklet is really easy among them. Why not get a try?

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Pair of Pearl Ball Drop Earrings for Brides

In this Beebeecraft tutorial, you will learn an easy way to make a pair of pearl ball drop earrings for brides. Follow the steps bellow to have a try.

There are hundreds of pearl earrings designs on our website. Today’s DIY earrings project is about a pair of easy pearl ball drop earrings for brides. As you can see from the picture, I only used white and yellow pearl beads to make the main body of the earrings with simple design. Below is the tutorial for you.

 Jewelry making supplies in making the bridal pearl ball drop earrings:

 10mm White Glass Pearl Beads

8mm White Glass Pearl Beads

4mm Yellow Glass Pearl Beads

0.38mm Jewelry String

Earring Hooks

Silver Headpin

Scissors

Side Cutting Pliers

Instructions on making the easy pearl ball drop earrings for brides:

 Step 1: Bead a basic pattern

 1st, snip off a short tiger wire (about 25cm) and slide 2 10mm white pearl beads and 2 8mm pearl beads alternatively;

2nd, cross one end through the 10mm white pearl bead as pictured;

3rd, slide a 8mm white pearl bead through each end, and then cross them through another 10mm white pearl bead and tighten;

4th, repeat the above procedure to bead one more square pattern.

Step 2: Make the beaded ball

 1st, slide a 8mm white pearl bead to each wire, and then cross the wires through the first 10mm white pearl bead in the starting point as shown in the picture and tighten up;

2nd, slide a 4mm yellow pearl bead through each end, and then thread the wire along to the 10mm pearl bead, and add a 4mm yellow pearl bead to each end, thread its way again;

3rd, repeat the process and finish the ball like bellow (shown in the picture).

Step 3: Finish the pearl ball dangle earrings

1st, pick an iron headpin, thread 2 4mm yellow beads, a 8mm white pearl bead to the headpin, and then insert the headpin through the pearl ball;

2nd, add a 8mm white pearl bead, a 4mm yellow bead to the headpin and make a loop in the end.

3rd, attach earring hook and finish the pearl ball drop earrings.

I wear them immediately after I finish this pair of pearl ball drop earrings! They are beautiful, aren’t they?

If you have friend that is a bride-to-be, then this pair of bridal pearl ball drop earrings is a great choice to of gift for friend! Save this Beebeecraft tutorial and try to make one pair, since it is not difficult to make them, and you can finish them within half an hour by following my tutorial!

[daisyjewelry]

Beebeecraft Tutorials on How to Make a Wire Wrapped Multi Colored Statement Necklace

In this article, I will show you an easy wire wrapped necklace tutorial on a multi colored statement necklace.

 Aluminum wires are really widely used in jewelry making. With just aluminum wires available, you can still make many great jewelry designs. Today I took some 1.5mm colorful aluminum wires, and make this charming wire wrapped statement necklace. You will find it simple after reading my tutorial below.

 Craft for jewelry making the colorful wire wrapped statement necklace:

 1.5mm Colorful Jewelry String

Jewelry Tool Supplies

Side Cutting Pliers

Round Nose Pliers

Long Nose Pliers

 Instructions on making the colorful wire wrapped statement necklace:

 Step 1: Make a basic aluminum wire circle

 1st, Snip off a short gold aluminum wire(about   cm), and fold in halves;

2nd, leave a circle and bride them and make a crock at the end.

Step 2: Make colorful wire wrapped ornaments

1st, snip off several pieces of colorful aluminum wires and wrap and roll each of them into snail circles as pictured;

2nd, wrap and tie each to the gold ring and tighten;

3rd, add the colorful wire wrapped ornaments one by one and finish the statement necklace.

This colorful wire wrapped statement necklace is finished within 15 minutes!

  I just turned 1.5mm colorful aluminum wires into fashionable statement necklace! Fellow this Beebeecraft Tutorials about how to make wire wrapped statement necklace, you do not need any skills, just follow my steps and make your own designs as you like! Have a nice try!