Untitled

[feedpelletmachine-blog]

Operation Caution of the Feed Hammer Mill for Feed Pellet Plant

* The operator should understand the machine structure, and be familiar with the hammer mill performance and operation methods.

* Please carefully check each connection parts to avoid loose phenomenon.

* With uniform feeding during the production rather than suddenly more or less to guarantee the motor work under rated load. 

* If strong vibration appears in the operation process, you should immediately stop the machine and find out the reasons, then continue to work after eliminate the breakdown.

[feedpelletmachine-blog]

Amisy feed pellets crusher and sieving machine are designed to break large feed pellets into small ones! Best choice for you to make feed pellets for different animal feeding. High efficiency & labour-saving.

[feedpelletmachine-blog]

How to Correctly Use Feed Grinding Machine

1. Fixed in the cement foundation. If the feed grinding mill often changes the workplace it should be installed in the iron base unit with motor.

2. Check the fasteners after being installed. If they become loose quickly tighten them.

3. Check whether the belt tightness is appropriate and whether the motor shaft and grinder shaft are parallel.

4. Before starting the feed grinding machine, the operator should rotate the rotor by hand to check whether teeth claw, hammer and rotor are flexibly operating, whether rotors’ rotating direction is gestured in the correct arrow orientation, whether the lubricant conditions of motor and grinder are good.

5. Do not frequently change the belt pulley in case the rotating speed affects normal operating.

6. Keep the machine no-load running for 3 minutes, if it has no abnormal occurrence then put raw materials.

[feedpelletmachine-blog]

Feed pellets cooling is an important process before pellets package. Amisy counterflow feed pellets cooler ensures a perfect pellets cooling performance for feed pellet plant.

[travelingcolors-deactivated2020]

Oia, Santorini | Greece (by Giuseppe Finocchiaro)

[feedpelletmachine-blog]

Making aquafeed pellets with aquafeed extruder is easy. Just see the video.

[feedpelletmachine-blog]

Four Factors Influence Feed Pellet Quality

Before I start to write this article, I would like to thank for your concern on feed pellet mill. Now here, I will tell you something about pellet quality. In general, the quality of a pellet mill will be based on the following four factors:

1. Material Fitness Fitness are a major factor in determine consumer satisfaction with pelleted feed quality. 

2. Feed Pellet Color Normally, color is a very important part of determining the quality of pelleted feed. If there has been no formula change, it is a good check on mixing and the addition of liquids, such as molasses and fat.

3. Feed Pellet Size The size of feed pellet also helps determine quality. The quality of pellets varies from two to three times the hole size of a die. 

4. Feed Pellet Surface The appearance of the outer surface of feed pellets will give an indication of the pellet quality. 

[feedpelletmachine-blog]

Want to make your own feed pellets or need guidance to large scale production of animal feed pellets? Amisy feed pellet mills can help you! Flat die feed pellet mill and ring die feed pellet mill for your choice.

[feedpelletmachine-blog]

Feed Pellets for Horse Farming

[feedpelletmachine-blog]

Why Feed Horses with Feed Pellets?

Feeding horses with feed pellets is considered from horses’ digestive physiological characteristics. Horses have hard teethes and developed masticatory muscle. So feeds with hard texture and soft surface conform to horses. Horse has fast metabolism and strong servitude thus feeds’ residence time in the stomach is short. Feeds with small size and balanced nutrition are good. Horse’s intestinal tract is uneven in thickness therefore they have bad ability in digesting low-quality coarse feeds. Feed pellets are produced based on the nutrition needs of horse, adopt scientific formula and mix a variety of raw materials evenly according to a certain proportion, then with a series of processing to form the final pellets. So pellet feed owns balanced nutrition content and good palatability for horse farming. Feed pellets are the concentrated feeds with higher conversation rate then horses can better digest them. The pellet’s hard texture and good palatability can increase horse’s feed intake and improve the production property. So feed pellets are tailored for horses.

[feedpelletmachine-blog]

Feed mixing process is necessary in animal feed pellet plant.Our feed mixer enjoy great popularity worldwide especially ribbon blender and double paddle feed mixer.

[feedpelletmachine-blog]

What Kind of Pellet Grading Sieve is Suitable for You?

1. You can choose different screen mesh shapes to get the best screening results. Generally, the rectangle meshes are suitable for cylindrical pellets; and the round meshes are suitable for irregular pellets with similar size.

2. If you use the bucket elevator to feed directly, the feed pellets are easily gathered on the sieve middle part. The screen is with low use ratio and the partial thicker material layers affect the grading effect. You can install a buffer hopper (equipped with flow deflector) at the feeding port to solve the problem.

[feedpelletmachine-blog]

I have a cute cat. She doesn't like eat food that I like. So I bought feed pellets for her. Look, she is eating happily.

[feedpelletmachine-blog]

Making animal feed pellets? Feed grinding is important. Our reliable feed hammer mill can make both coarse and fine grinding, absolutely your best choice.

[feedpelletmachine-blog]

Feeding dog with feed pellets that made by feed pellet mill.

[feedpelletmachine-blog]

Amisy is proud to be a leading manufacturer of feed pellet mill to make feed pellets much healthier and green to water.

[feedpelletmachine-blog]

The Aquafeed Market

Aquafeed is the most dynamic and exciting feed market today. With growth rates unparalleled in any other feed sector, it offers tremendous potential to feed ingredient, technology and service providers. According to iffo, FAO and industry reports, commercial aquafeed production has seen consistent double-digit growth over the past 20 years. By comparison with the mature animal feed sector, which has shown stagnant to modest (3%) growth at best. Rising demand for fish, pressure on wild-catch, new farming methods and species will drive growth even faster in coming years.