Top Mistakes to Avoid During Floor Installation
When it comes to floor installation, we always tend to give priority to the materials we choose. Considering this, not many of us know that each material that we choose has its share of challenges. Since most people do not understand the trouble areas that lay with the materials used for floor installation in Perth, it usually leads the installer to invest their efforts into trying to cover up for the faults. In the next few lines, we will discuss some of the mistakes which according to experienced floor installers should be avoided at all costs.
Installing tiles directly on concrete floors
Tile installation is a methodical process demanding attention at all costs. Experts are of the opinion that tiling on a concrete substrate can surface more issues than anyone can imagine. They have warned against reflective cracking. This shows up when the concrete substrate cracks, warps or the sub layers shift. The cracks along the substrate cause the tiles to crack too.
Insufficient subfloors underneath a natural stone
This is a preparation mistake that happens when you hire inexperienced floor installers. Generally, installers must have an idea about natural stones and their salient features. Supposedly the subfloor is made of timber and the installer directly installs the stone slabs on them, there is a chance that the floor will experience crack.
Cheating on the curing time
According to specialists, tiling, caulking, adding sealants and grouts demand time to cure. If the installer is not giving time for the elements to cure, we are sure the floor will face a problem in a few months. Some of the products demand 24 hours for curing.
Installing a wood floor in a wrong place
Wooden floors are not for every room or space you come across. Most of you may think of adding glamour to the wet space by getting a wooden floor installed. Being a wet space, the bathroom is not the ideal place to get wooden floors installed. When you contact floor installation experts in Perth make sure you do not use wooden planks for the floor.
Lack of glue
Here is a mistake which can cost you heavily. For a finished wooden floor, the outer edges around the walls should stay secure to allow the floor to remain tightly fitted. The rows need to be glued properly for maximum adherence.
Not preparing the laminate layout
Careful measuring along with planning is a necessity. A common mistake that inexperienced installers make is picking the longest among walls in the house for laying the floor without realising that the wall can be misaligned.
Watch out for these mistakes if you do not want the flooring in Perth to fail.