What are the components of the double roller granulator The working principle of the twin roller granulator is that the belt and pulley are driven by the motor and transmitted to the driving shaft through the reducer, and they are synchronized with the passive shaft through the split gear and work in opposite direction. The material is added from the feeding hopper, extruded by a pair of rollers, demoulded and pelletized, and then transported to the crushing Screen Studio through a pair of chains. The finished products (balls) are screened and separated, and then the returned materials are mixed with the new materials, and then granulated. With the continuous rotation of the motor and the continuous entry of materials, mass production can be realized. The structure of double roller granulator is summarized The whole fertilizer granulation machine is divided into four parts 1. Frame part: all working bodies of the machine are fixed on the frame. The frame of the machine is made of medium carbon steel plate and channel steel by welding. Through strict quality control and specific process requirements, the purpose of the machine is achieved. Lifting holes are set in the middle of the four corners of the frame for use in loading, unloading and transportation. 2. Transmission connection part: the motor drives the belt pulley, V-belt and reducer to drive the machine head. In addition, the chain wheel and chain constitute the transmission chain and transmit to the crushing and separating work part. The transmission reducer and the working part of the machine head are meshed with nylon pin coupling to transmit and drive.organic fertilizer granulation machine
3. The working part of the machine head: the transmission wheel is transmitted to the transmission roller shaft through the pin coupling. The synchronous operation of the pair of rollers is guaranteed by a pair of open gears. There are specific bearings on both sides of the active and passive shafts, which are composed of bearing frames and are installed on the frame. 4. Crushing and separation part: the material flows to the crushing chamber at the lower side after being extruded by the roller, and the ball particles and returned materials can be separated by the rotation of the double shaft wolf toothed stick.













