IADC training

[iadctraining-blog]

Drilling Problems – Things you should know about it

Drilling an oil well is not as simple as most of the people think. There are a number of drilling problems which can arise during drilling and the problems which generally arise are very difficult to handle. Generally, the problems that are faced during drilling wells cost too much to the drilling company. Though there are ways for making the drilling problem disappear, but those methods costs too much. One cannot be sure that he or she will not face any drilling problem during drilling a well because even a very well planned drilling operation can end up in disaster because of the occurrence of drilling problem. iadc course includes all the drilling problems and their preventions; if you are thinking to join oil industry and mainly the drilling section then you should choose iadc training courses only.

Even in the similar area where the drilling process hasn’t experienced or confronted any drilling problem can face drilling problem in their next project. The reason behind this is that the formations in any area are not homogenous because of which every well project requires a different approach. Therefore, even two wells next to one another can have completely different geological conditions in respect to each other.

One can avoid these problems during a drilling process but for avoiding the drilling problems one will have to consider each and every potential drilling problem which can occur during drilling and after anticipating this entire one should design the drilling program. Though all this might look easy, but in reality it is not.

Some of the most common drilling problem has been enlisted below:

Pipe sticking or stuck pipe

During any drilling process, it is considered that stuck pipe problem has arisen when the pipe being used for drilling gets stuck and the pipe cannot be freed without getting the pipe damaged. One can prevent pie sticking by following stuck pipe prevention. This very problem can be classified in two categories the very first one is mechanical pipe sticking and other is differential pressure pipe sticking.

Lost circulation

In this drilling problem, uncontrolled flow of mud occurs in the formation. This very problem is also known as “thief zone”.

Hole deviation

In case of hole deviation the drill bit moves unintentionally from the borehole trajectory selected during the drilling programs. This very problem can cost too much. Hole deviation drilling problem can also result in lease boundary legal problems.

Drill pipe failure

This very problem can arise because of a number of reasons. Some of the common reasons because of which drill pipe failure occurs are parting of pipe due to excessive tension, twist off as a result of excessive torque, fatigue because of mechanical loads, and collapsing or bursting of drill pipe because of external or internal pressure. One cannot eliminate the chances of drill pipe failure, but one can maize the chances of this problem by following some of certain measures.

The entire above drilling problems can be serious and can increase the cost of the whole project, but by following the right procedure and keeping in mind the entire preventions one can minimize the occurrence of drilling problems.

[iadctraining-blog]

AN INTRODUCTION TO OIL & GAS INDUSTRY

It will not be wrong to say that oil and gas industry is one of the biggest sectors, which is expanding day by day. It is the power house of the whole world thus it is the best sector which is not only biggest in dollar value but this sector is providing the opportunity to the workers to get the join this very sector. As it is growing day by day and with the growing oil and gas industry the demand of workers in this sector is also growing which in result is generating job opportunities for the people.

Getting trained for the field

But for getting in this field you will have to first get the required training. There are numerous agencies and companies providing these training courses but for getting the best training you will have to first choose the best one from the available option. Note this that the selection process is not an easy task it requires a lot of time and it will not be easy to choose the right company or agency from the large number of options. But there are few tips and tricks by which you can short out the list of the best training providers in the market.

Generally the course first includes introduction to oil & gas industry. Most of the reliable and good training providers provide completion, workover, drilling and Well Training. But before selecting any specific training provider I would suggest you to do some research, as it is better to get the idea about the training quality before joining any training provider.

Use internet for your benefit

You can search for the good and reliable training providers with the help of the internet. But as usual you will face the similar problem, as the search engines gives the name of nearly hundreds of the training providers. It will be a tedious task to go with the details of each and every company or agency providing training, but there is a way out from this problem. You can take the help of the ranking sites as there are numerous ranking sites which provide the details of the companies and agencies providing training. The ranking sites uses the reviews, feedbacks, course design and other details in order to rank these training providing companies and agencies.

After that you can easily get to the best training provider but it is generally suggested to do some investigation on you own level as it will help you in getting the clarity whether to trust the training provider. The very first thing that you can do is to go through the reviews and feedbacks of candidates who have joined these IADC courses. By going through the feedback and reviews of the company you will get the idea about the quality of training and also about the company’s image. 

All the above given points will help you in finding the best training provider company or agency out there in the market. Let me tell you that after the completion of your training you will have a number of job opportunities in from of you.

[iadctraining-blog]

OIL & GAS INDUSTRY – Making a career in this booming industry

There is no doubt that oil and gas industry is one of the most important industries of the world. As a matter of fact both gas and oil are obtained from under the earth’s surface. Gas and oil are the most important and widely used natural resources. Oil and gas industry has touched every aspect of human life and after the arrival of technological development and lot of exploration the demand of oil and gas has increased exponentially. It is a booming industry which is supposed to grow more in the upcoming future. This is the very reason because of which it is an industry which is thought to be full of opportunities.

Making a career in this industry

If you have the required knowledge and training, then you can easily bag a good job in this field and can excel in your career. It is a well-known fact that the growth of the global economy depends on this industry. Therefore, it won’t be wrong to say that it is one of the best industry career wise as one can easily get a good position in this industry.

But for getting a good job in this field one is supposed to have the required training. There are number of training institutes and providers out there in the market but for getting quality training you will have to choose the training provider with great caution. For getting the introduction to oil & gas industry finding the best training provider is must. If you are eager to enter into this field then Well Trainwell Training Program is the best training program which is approved by IADC and follows IADC regulations.

Courses that you can take

There are different courses available and for getting the required course and training finding a reliable training provider is important. Though this task is not easy but with few simple tips you can find a reliable and affordable training provider in no time. The very first way to know which one of the available option is best you will have to take the help of internet. With the help of internet you can know which of the training provider is better. There are few simple steps the very first step that you will have to take will be to look for a ranking website after that select the topmost ranking training providers. After shortlisting you will have to do some research work. With the help of independent forums, you can know and read the reviews provided by the former clients or students. It is better to go through the reviews as they are like testimonials about the training quality.

The course will tell you and will equip you with all the necessary knowledge about drilling and the drilling problems. As this Introduction to Oil & Gas Industry is a booming one, thus, you will get numerous opportunities after the completion of the training. But remember this, that always check the license of the training provider and check whether the training provider is a certified one or not. 

[iadctraining-blog]

See you at the AOG 2015

Plans are well underway for the biggest expo in Australia's Oil and Gas calendar, the AOG. 6 months away and already 95% of booths have already been spoken for and companies are beginning planning of what their booths will look like... and we are pleased to announce, that Well Train will be making a presence! It's going to be a HUGE exhibition this coming year, so make sure you all come attend! We will be on stand R30, inbetween the International Pavilions and round the corner from the AOG restaurant. Come visit the lovely Lesley and Karen, our 2 main faces of Welltrain, and we will also have a few special offers available on the day as well. Hope to see you all there!

[iadctraining-blog]

AN INTRODUCTION TO OIL AND GAS INDUSTRY

You can get the main idea about the article from its name itself “Introduction to oil and gas industry”. Oil and gas industry is among one of the most promising industry. This industry is rapidly growing and changing with time. As in the name it has been denoted that thus industry relates to oil and gas and these two natural resources are obtained from the earth (under earth’s surface). It will not be wrong to say that these two natural resources are the most important natural resources on the earth.

  The growth of global economy largely depends on this very industry. With the advancement of technology and exploration the demand of these natural resources has increased rapidly. It has been predicted that these two resources are expected to be the leading energy resource in the coming decade also.

  Get a bright career in energy industry

  If you are looking for bright career than, this industry can provide you with the opportunity to have one right in front of you. As the industry is growing regularly thus there is a large scope of career growth in this specific field. But for getting into this field and also for achieving good position you will have to join training classes in order to get eligible for this field. There are numerous training providers in the market. But there are very few training providers among them which will provide you quality training. For getting good training in this field you will have to first find a reliable training provider.

  For getting quality service you can join well train training program. A good training provider will give you the basic knowledge about the related topic.

  Most of the training providers provide a variety of training based 9in completion, drilling, well services and workover. The most prominent training which is required in this field is IADC training and IWCF training. Getting IADC training certificate and IWCF training certificate from licensed and certified training provider is of great importance.

  Finding a good training provider is important but this task can be tough and time consuming. But there are few tips by which you can find a reliable and trustworthy training provider in order to get proper training. Getting the help of internet can help you in getting the names of numerous training providers. But this can cause problem as it is very hard to find a good and reliable training provider in order to get the required result. By going through the detailed study about the training provider you can get the name of the popular and reliable one from the available lot.

  Always choose those training provides only which has good experience in this field. Also check whether the training provider is licenced and certified or not. Going through the details about the trainers and their qualification can give you the rough image about the training quality. But once you get the training provider than you can easily achieve a good position in the oil and gas industry as there is no lack of opportunities in this filed.