Diapers / Caths / Stents

An old, straight man exploring the world of uncontrolled wetting with DIY urinary stent. What I do is very risky.  For experienced catheter users only.

[fluffedandfree]

Color coordination project!!! We will let the LEGO man choose! Thank you to the straitjacket shop for such an awesome cover!

[ind247]

Found at a local Asian grocery store. Drinkable yogurt with a baby nipple top. The writing on the right says "I am still a baby".

These were in the regular drink section, not baby or toddler needs.

[ind247]

Hello 🖐️ can you send mommy a direct text message please 🥰🙏🥰

No, but you can fuck right off.

[ind247]

Hello,

how much does it cost in total to ship two catheters to France? What diameter do you use for the Foley catheter?

Thank you.

I'm pretty sure you can buy regular catheters in France? If you are asking to buy a stent, I don't sell them for less than $1,000,000 USD.

To make a stent I usually use 22FR sized stents, or 8mm. Good luck!

[ind247]

Hi

What's special about the green segufix locks? Are they more secure?

And how does your chastity safe work?

The green locks are far more secure. The regular black top locks can be opened by pretty much any magnet. The green ones can only be opened with the Segufix key. If you actually want the chastity pants to be secure, you want the green tops.

The chastity safe is controlled by a microcontroller, in this case an ESP32 (Arduino compatible) talks to emlalock to determine if a session is in progress or not. If a session exists, the safe will not open. You could also program a web interface to keep the safe locked for a preset or random amount of time, or even make it remotely controlled. There are more examples on FetLife and probably reddit. This post has some good info : Using a digital safe with emlalock - EmlaLock Community | FetLife . The author has good info on his profile too.

[ind247]

Hi, do you sell stents? I'm @diaperfurryfox On X (twitter) and have been trying to make one but I don't have the materials.

If you do that would be great if not thats okay.

No one has the materials at first, that's why you buy them.

I do sell stents though. Please see : https://www.tumblr.com/ind247/764711261789454336/wouldn-you-be-willing-to-sell-me-a-couple-of-your?source=share

[ind247]

Hello, I’ve been a long time fan, we’re connected on fetlife. For fitting in the bends, how do you do it? My fingers always sore and chafed and I’m not able to do it efficiently. It’s the most tedious part of the process. Do you have any advice?

I totally get this and agree with you 100%, this part is difficult and can hurt. What size tubing are you putting into what size catheter? What are you using for lube? Are you pre-lubing the catheter before pushing in the tubing? Lastly, I use pieces of paper towel to grasp both the catheter and the tubing to be pushed and. This helps prevent pain and suffering to your fingertips. I will try to post a video this week on how I do it. That said it does get easier over time as your fingers build up strength intolerance.

[ind247]

Who can guess what this is? No Canadians allowed (and that is the only hint).

Edit to add : I should have included scale... It's about 2" long.

[ind247]

Play safe folks. Remember this pursuit is risky, and can cause serious trouble. Test your retrieval line, and go redundant when able.

Ps. This person never replied back to my questions, but they are still active on tumblr so I assume they got it out.

[ind247]

Road trip adventures.

[paddedtrucker]

Had some free time and filament. That combo usually leads less than vanilla places.

[ind247]

This is amazing work! What sort of printer did you use?

[ind247]

New bed for happy fun times. Works great with the Segufix gear.

Also, Happy New Chinese Year. Year of the 🐍🐍🐍

[ind247]

"End of the roll" stents 😁

Made from the back side of catheters. Works just as well, just a bit more work getting in.

[ind247]

@coloextrm had a good question that made me realize I've never really posted how I attach the retrieval line.

Obviously I can't (and don't really want to) show my penis on tumblr. In this example the clear tube is my penis.

The retrieval line passes up through the urethral passage. Using the loop at the end of the line, I wind it around the d-ring a few times. Then I pass the d-ring through the PA opening and screw the d-ring shut. In the second picture I changed the line to a more viable orange color.

With this setup the line remains a bit loose, so it doesn't rub along the exit. The minimal amount of external line and rubber o-ring makes me happy too.

One last safety note. My PA piercing hole is over 15 years old now, and very well set. The D-ring is also wide enough not to cause issues. With this setup I don't have to worry about the "cheese wire effect". Google it if you must, but be forewarned, it ain't pretty.

[ind247]

One of my most successful stents in a while. Works in pretty much any position, including laying down! 😁

It's crazy how a few degrees here, or a millimeter there can make such a difference.

[ind247]

Stent use tracking for 2024. I was hoping for 95%+, but sometimes life gets in the way. Overall I'm still very proud of wearing 24/7/275 days.

[ind247]

There's nothing like a thick diaper, a big drink, a warm fireplace and the classic Christmas movie, "Die Hard" to enjoy this day.

Hope everyone is enjoying this day in their own way 🙂. Merry Christmas!