Untitled

[max-lucy-blog1]

Electronic Crockmeter, to determine the colour fastness of textiles to dry or wet rubbing.

[max-lucy-blog1]

Din Abrasion Tester, to determine abrasion of flexible materials, such as rubber, tires, transmission belts, Sole, leather etc. The abrasion tester provide with a wide testing area to meet the most request. Additional balance is required.

[max-lucy-blog1]

Causes and Influencing Factors of Wear Resistance of Textiles

[max-lucy-blog1]

This Air Permeability Tester is used to test the resistance of the flow of air through fabrics such as woven or non-woven textile materials as well as knitted clothes under a constant air pressure.

[max-lucy-blog1]

Textile Tensile Testing Machine, available with single and dual column frame with capacities of 250kgf, 500kgf, 1000kgf, 3000kg (500lbf, 1000lbf, 2000lbf, 6,000lbf) and include two model types, the M series and the P series.

[max-lucy-blog1]

This Air Permeability Tester is used to test the resistance of the flow of air through fabrics such as woven or non-woven textile materials as well as knitted clothes under a constant air pressure.

[max-lucy-blog1]

Wyzenbeek Abrasion Tester. Modern ergonomic design to determine the abrasion resistance of fabrics when rubbed against a standard abradent or a wire mesh screen with a backward and forward motion over a curved surface.

[max-lucy-blog1]

water spray rating test

What's the Spray Rating Tester used for?

Spray Rating Tester, to determine the surface wetting resistance of fabrics, which may or may not have been given a water-resistant or water-repellent finish.

Spray rating tester consists of a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle.

Do you want to know more about the Spray Rating Tester ?

Specifications

Nozzle 19 holes of Di 0.9mm

Angle of holder 45°

Holder 150mm, 150mm below the nozzle

Measuring Cup 250m

Want to know more of Spray Rating Tester ? Please click：

http://www.testextextile.com/product/spray-rating-tester-tf160/

Our E-mail: [email protected]

[max-lucy-blog1]

zipper test standard

What's the Zipper Torque Tester used for?

Zipper Torque Tester, to determine the torsion resistance of zippers, and 3 test methods is offered: torsion breaking, angle test and load test.

Real time test result and process is displayed on touch panel, or on the windows based software on computer when connected.

Do you want to know more about the Zipper Torque Tester ?

Specifications

Torque range      5.000N.m

Torque accuracy   0.1cN.m

Torsion angle      150

Torsion speed     0.5r/min ~ 2.0r/min

Want to know more of Zipper Torque Tester ? Please click：

http://www.testextextile.com/product/zipper-torque-tester-tf150c/

Our E-mail: [email protected]

[max-lucy-blog1]

zipper sliding force tester

What's the Zipper Sliding Smoothness Tester used for?

Zipper Sliding Smoothness Tester, to determine the sliding smoothness of zippers made of metal, injection mould plastic, nylon, etc.

The force measurement is made of high precision force sensor and microcomputer.

Automatic tracking of force values and peak values of force automatic positioning function; Windows based software display and store the test result of sliding smoothness, max. min. av. C., etc., and automatically judge the test results;

Comes with touch screen display and user-friendly interface that is easy to operate.

Want to know more of Zipper Sliding Smoothness Tester ? Please click：

http://www.testextextile.com/product/zipper-sliding-smoothness-tester-tf150b/

Our E-mail: [email protected]

[max-lucy-blog1]

zipper reciprocating tester

What's the Zipper Tester used for?

Zipper Reciprocation Tester, to determine the resistance to reciprocation of zipper (slide fastener). The test specimen is subject to a specified number of cyclic operations whilst under lateral and longitudinal tension.

Zipper Tester catches the head of zipper to do reciprocating movement in a constant speed for 30 times per minute. Integral counter is set to stop the drive when a pre-selected count has been reached.

Equipped with a sensor so that the machine will stop automatically before the zipper is broke. Adjustable stoke 40~100mm is offered as request.

Do you want to know more about the Zipper Tester ?

Specifications

Speed: 30/min

0-10 Kg lateral force.

0-5 Kg longitudinal force

Counter: 1-999,999times,adjustable

Want to know more of Zipper Tester ? Please click：

http://www.testextextile.com/product/zipper-tester-tf150/

Our E-mail: [email protected]

[max-lucy-blog1]

horizontal flammability tester

What's the Horizontal Flammability Tester used for?

Horizontal Flammability Tester, to determine the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use. Automatic igniter is equipped to ensure the horizontal flammability tester is safe and easy to operate, comprising draft free stainless steel cabinet with observation window, sample holder and door mounted burner.

Do you want to know more about the Horizontal Flammability Tester ?

Fire nozzle di 9.5mm

Fire height 38mm+/-2

Sample clamp 360 x 100mm / Interior dimension  330x50mm

The sample below 25mm pitch between metal wire is 25mm

Marked line Starting point 38mm / End point 292mm from Ignition point

Nozzle to Sample   19mm

Want to know more of Horizontal Flammability Tester ? Please click：

http://www.testextextile.com/product/horizontal-flammability-tester-tf311/

Our E-mail: [email protected]

[max-lucy-blog1]

vertical flammability tester jobs

What's the ertical Flammability Chamber used for?

Vertical Flammability Chamber, for measuring the vertical flame spread of children’s sleepwear, fabrics (fabric burn test), and other textile materials or resilient filling materials used in upholstered furniture.

The burner ignites the specimen automatically, and ignition time is programmable; after-flame time and afterglow time are timed automatically and shown on the display. User-friendly design of the control panel, Touch screen is equipped to make the operation conveniently, the test results are displayed on the screen after test.

Comprises a draft free stainless steel flammability chamber with observation window for easy test viewing. Specimen holders, burner and associated hardware are dependent on the test standard and must be specified.

Do you want to know more about the ertical Flammability Chamber ?Specifications 

System and Display Programmable PLC and touch screen controls Time Display and accuracy      0-999.9s, 0.1s

Ignition time 12+/-2 s or 3+/-0.2 s

Burner size   10mm / 11mm x barrel length 76+/-6mm

burner to specimen 19 or 17 mm

Dimension of holder outside 442 x 76 / 442 x 89mm,  interior 356×51 mm

Timing PLC controlled

Optional Testing Kits

FTMS 191-5903 (fabric)

DOC FF3/71 Children pyjamas / CPAI 84 Camping tentage material

CALIF TB-117 Resilient Filling Materials Vertical

Want to know more of ertical Flammability Chamber ? Please click：

http://www.testextextile.com/product/vertical-flammability-chamber-tf312/

Our E-mail: [email protected]

[max-lucy-blog1]

color fastness to washing scale

What's the Washing Fastness Tester used for?

Washing Fastness Tester (Launderometer), to determine color fastness to washing or dry cleaning to ISO, BSI, AATCC and Marks & Spencers standards.

The washing fastness tester uses stainless steel rotor to holds washpots on each of four sides and rotates at a constant 40 rpm (+/-2 rpm). Washpots are preheated in appropriate test solution.

Containers are sealed with either a Neoprene rubber gasket or optional Teflon gasket.

To carry out the tests of AATCC and ISO standard fast, TESTEX redesigned the launderometer, with two baths to offer a maximum combined capacity of 12 and 6 vessels, and the baths have completely separate controls and drive systems, so they can be used as two independent machines for both ISO and AATCC standards. Opening door, test-finished alarm, etc.

Stainless-steel balls and pieces are included.

Single bath combined with both ISO and AATCC washpots in less quantity are offered on request.

Do you want to know more about the Washing Fastness Tester ?

Rotation speed 40 +/- 2rpm

AATCC canister   1200ml, 6 pcs

ISO canister    550ml, 12 pcs

Max 98 oC, adjustable

Running time adjustable

Steel Balls           200 pcs

Want to know more of Washing Fastness Tester ? Please click：

http://www.testextextile.com/product/washing-fastness-tester-tf418/

Our E-mail: [email protected]

[max-lucy-blog1]

xenon arc test chambers

What's the Automatic Micronaire Meter used for?

Water-Cooled Light & Weather Fastness Tester, to determine the color fastness, aging resistance of textiles, plastics, rubber products or materials by objecting to the simulated conditions of nature weather (daylight, rain, temperature and humidity, etc.). The tester simulates both light and dark cycles and nature weather conditions by rack sprays and water-cooled long-arc-xenon lamp equipped.

Do you want to know more about the Automatic Micronaire Meter ?Features

Light intensity set digitally, real-time monitoring, automatically adjust to meet the different standards required for testing the stability of light source (optional 420nm or 300 ~ 400nm band monitoring)

Blackboard Thermometer (BPT), the Standard Blackboard Thermometer (BST), Irradiance detector and samples placed in the same position, a true reflection of the sample under test conditions, the data displayed as figures, charts, curves on the large color screen, no need to stop for observation.

Large colorful display, a variety of test monitoring modes (animation, digital, graphics) operate easily and clearly.

Sample holders can be timed independently to achieve different tests simultaneity in the same machine

Equipped with Water-cooled rated 4500W long-arc-xenon- lamp, truly simulates the daylight spectrum.

Professional water circulation system, reduce operating costs.

Industrial temperature control (cooling) system offers quickly and smoothly control

Ultrasonic humidifier, professional dehumidification system to ensure accurate and stable humidity conditions.

Equipped with self-circulation system and air filtration system, significantly reducing the environmental requirements.

Cooled by circulating water chillers / water cooling two options to choose from.

Quality assurance of 1000 hours continuous running.

Front and back sides spray pattern on samples.

Specifications

Working modes To simulate and reinforce the impact of the nature of the measured object, providing light, temperature, humidity, rain and other quantitative indicators.

Light source 4500W Water-cooled long-arc xenon lamp

Average lifetime     1200 h

Temperature range Room temp. + 5 ~ 48 ℃, accuracy +/- 2 ℃

Humidity range 30 ~ 85% RH accuracy +/- 5 %

Test time control 1000h

Irradiance range    (0.8 ~ 1.400) +/- 0.02 W/m2 @ 420nm (35 ~ 55) +/- 1 W/m2 @300 ~ 400 nm Other range can be digitally set and automatic compensation

Sample holder    210 x 45 mm, the max. thickness of sample can be 8mm, 25 samples holders, 250 samples could be tested in the same time

Rotation speed of sample holder 1 rpm

Independent timing of sample holders ≤ 1000h

BPT Range (40 ~ 80) +/- 2℃

BST Range (40 ~ 85) +/- 1℃

Want to know more of Automatic Micronaire Meter ? Please click：

http://www.testextextile.com/product/water-cooled-light-weather-fastness-tester-tf422/

Our E-mail: [email protected]

[max-lucy-blog1]

cotton micronaire tester

What's the Automatic Micronaire Meter used for?

Automatic Micronaire Meter, used to determine the micronaire value of cotton fibre. CPU tech. be adoped which can give digital reading and make adjustment of micronaire value (and weight value as well) more easy and convenient. The sampling range is more big, operation more efficient, and test results more accurate. The micronaire value and cotton grade can be displayed directly on the tester, the test data also can be show displayed in the PC when machine connect to the computer.

Do you want to know more about the Automatic Micronaire Meter ?

Specifications

Micronaire value range:2.5-6.0Micronaire Value

Accuracy:+/- 0.05 Micronaire Value (The first in the world)

Specimen weight:7.5~8.5g

Volume:0.26g/cm3

High Test Speed:A few seconds for one sample

Want to know more of Automatic Micronaire Meter ? Please click：

http://www.testextextile.com/product/automatic-micronaire-meter-tb310/

Our E-mail: [email protected]

[max-lucy-blog1]

micronaire tester

What's the Automatic Micronaire Meter used for?

Automatic Micronaire Meter, used to determine the micronaire value of cotton fibre. CPU tech. be adoped which can give digital reading and make adjustment of micronaire value (and weight value as well) more easy and convenient. The sampling range is more big, operation more efficient, and test results more accurate. The micronaire value and cotton grade can be displayed directly on the tester, the test data also can be show displayed in the PC when machine connect to the computer.

Do you want to know more about the Automatic Micronaire Meter ?

Specifications

Micronaire value range:2.5-6.0Micronaire Value

Accuracy:+/- 0.05 Micronaire Value (The first in the world)

Specimen weight:7.5~8.5g

Volume:0.26g/cm3

High Test Speed:A few seconds for one sample

Want to know more of Automatic Micronaire Meter ? Please click：

http://www.testextextile.com/product/automatic-micronaire-meter-tb310/

Our E-mail: [email protected]