JiaXing MT Stainless Steel Co., Ltd

[mtscomaxtech-blog]

ASTM B444 / ASME SB444 Nickel Alloy Tubing 14BWG / 18BWG / 20BWG

1. Grade : Inconel 625 / N06625 , Inconel 600 / N06600 , Inconel 601 / N06601 , Inconel 718 / N07718 , Hastelloy C276 / N10276 , Incoloy 800 / N0800 ,  Incoloy 825 / N08825 , Monel 400 / N04400 ; etc 2 . OD ( Outer Diameter ) : 6.00mm to 48.00mm 3 . WT ( Wall Thickness ) : 0.71mm to 2.11mm 4 . Length : As customer's requirement 5 . Standard : ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect 6 . Technology : Cold Drawn / Cold Rolled

Test :

1 . NTD(Ultrasonic test, Eddy Current test) 2 . Mechanical Test(Tension Test, Flaring Test, Flattening Test, Hardness Test, Hydraulic test) 3 . Metal Test(Metallographic Analysis, Impact Test-High/low temperature) 4 . Chemical Analysis(Photoelectric Emission Spectroscopic)

  MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement . According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .   Main market or alloy tube include Europe , Middle East , Southeast Asia , South America , etc . MTSCOMAXTECH has bright annealing alloy tube and pickling alloy tube . Compared these two kinds of tubes , bright annealed alloy tubes are more popular in the market . Because it has bright out and inner surface .

http://www.duplexsteeltube.com/sale-7289757-astm-b444-asme-sb444-nickel-alloy-tubing-14bwg-18bwg-20bwg.html

[mtscomaxtech-blog]

ANSI B36.19 Nickel Alloy 600 , 601 Tube ASTM B829 / ASME SB829

  MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement . According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .   Main market or alloy tube include Europe , Middle East , Southeast Asia , South America , etc . MTSCOMAXTECH has bright annealing alloy tube and pickling alloy tube . Compared these two kinds of tubes , bright annealed alloy tubes are more popular in the market . Because it has bright out and inner surface . Test : 1 . NTD(Ultrasonic test, Eddy Current test) 2 . Mechanical Test(Tension Test, Flaring Test, Flattening Test, Hardness Test, Hydraulic test) 3 . Metal Test(Metallographic Analysis, Impact Test-High/low temperature) 4 . Chemical Analysis(Photoelectric Emission Spectroscopic) Application : 1 . Heat exchanger 2 . Condenser 3 . Shipping industry 4 . Precision machinery 5 . Mechanical structure industry 6 . Thermocouple & Cable etc http://www.duplexsteeltube.com/sale-7288543-ansi-b36-19-nickel-alloy-600-601-tube-astm-b829-asme-sb829.html

[mtscomaxtech-blog]

Inconel 601 Nickel Alloy Tube For Cable Industry , Bright Annealed Tube

 MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement . According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .

  Main market or alloy tube include Europe , Middle East , Southeast Asia , South America , etc . MTSCOMAXTECH has bright annealing alloy tube and pickling alloy tube . Compared these two kinds of tubes , bright annealed alloy tubes are more popular in the market . Because it has bright out and inner surface .

http://www.duplexsteeltube.com/sale-7133936-inconel-601-nickel-alloy-tube-for-cable-industry-bright-annealed-tube.html

[mtscomaxtech-blog]

ASTM B167 Nickel Alloy Tube For Thermocouple Inconel 600 , Cold Rolled Tube

 MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement .

   According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .

http://www.duplexsteeltube.com/sale-7133222-astm-b167-nickel-alloy-tube-for-thermocouple-inconel-600-cold-rolled-tube.html

[mtscomaxtech-blog]

ASTM B167 Nickel Alloy Tube Bright Annealing Inc 600 / 601 , 100 % PMI Test    MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement .    According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .

http://www.duplexsteeltube.com/sale-7070613-astm-b167-nickel-alloy-tube-bright-annealing-inc-600-601-100-pmi-test.html

[mtscomaxtech-blog]

Duplex Steel Tube ASTM A790 S32750 / 2507 6096mm Length ISO 9001

ASTM A790 2507 duplex steel pickling tube are always purchased by the clients who need high corrosion tubes .

Compared to stainless steel tubes , duplex steel tubes have more higher corrosion ability . They can be used in sea industry .

  Super duplex Stainless Steel is a highly alloyed , good performance duplex steel with a pitting resistance . Super Duplex offers good resistance to pitting and crevice corrosion . It is suited for use in aggressive environments . It also has good resistance to stress corrosion cracking in chloride and sour environments . And it has good resistance to erosion corrosion and corrosion fatigue .   Super duplex stainless such as duplex is a mixed microstructure of austenite and ferrite which has improved strength over ferritic and austenitic steel grades . The main difference is super duplex has a higher molybdenum and chromium content which gives the material greater corrosion resistance .   Super duplex has the same benefits as its counterpart - it has lower production costs when compared with similar ferritic and austenitic grades and due to the materials increased tensile and yield strength , in many cases this gives the purchaser the welcomed option of purchasing smaller thicknesses without the need to compromise on quality and performance .

http://www.duplexsteeltube.com/sale-7102056-duplex-steel-tube-astm-a790-s32750-2507-6096mm-length-iso-9001.html

[mtscomaxtech-blog]

2205 Material Duplex Steel Tube Hydraulic Test With Pickling Surface

  MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed

tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy

tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy

your requirement .

  According to standard very strictly , duplex steel tubes which produced by us always have correct OD and WT tolerance . And they have more perfect corrosion ability .

Material Grade S32205, S31803, S32304, S32750, F51, F53, 2205, 2507 etc Outer Diameter5.80mm-1219.00mm (0.23" to 48") Wall Thickness0.71mm-25.4mm (0.04" to 1") LengthNormally fixed length 6m, can as per customer’s requirement StandardASTM A789; ASTM A790; EN 10216-5ect. Process MethodCold Drawn or Cold Rolled

[mtscomaxtech-blog]

ASTM A790 Duplex Steel Pipe With Fixed Length And Cold Rolled Method

  MTSCOMAXTECH is specialized in duplex steel pipes produce . So we know good at duplex steel knowledge . Hope the clients who are choose us can be very assured . And no need worry about our produce ability. We , MTSCOMAXTECH , is worth for your belived . Like SAF 2507 duplex steel . The SAF 2507 / 1.4410 is a super duplex stainless steel with 25% chromium, 4% molybdenum, 7% nickel . This kind of pipes always purchased by the clients who are require exceptional strength and corrosion resistance . The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion. And the high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

  Welcome everyone who need this kind of pipes contact to me in free . Also MTSCOMAXTECH can produce stainless steel seamless pipes, bright annealed tubes, seamless coiled tubing etc . You go ahead one step , we can help you creat more profits than your mind .

Application :

1 . Petroleum

2 . Chemical industry

3 . Instrument

4 . Industrial transportation

5 . Mechanical structure industry

6 . Need high corrision ability pipe's industry , such as offshore industry etc

[mtscomaxtech-blog]

ASTM A790 SAF 2507 Duplex Pipe Higher Yield With Annealing And Pickling

   MTSCOMAXTECH is specialized in duplex steel pipes produce . So we know good at duplex steel knowledge . Hope the clients who are choose us can be very assured . And no need worry about our produce ability. We , MTSCOMAXTECH , is worth for your belived .

   Most of 2507 duplex steel pipes are produced by cold drawn method . The alloy has higher yield

strength and lower ductility than austenitic steels so fabricators may fid that higher forming forces , increased radius of bending , and increased allowance for springback are necessary . Deep drawing , stretch forming , and similar processes are more difficult to perform on 2507 than on an austenitic

stainless steel . When forming requires more than 10% cold deformation , a solution anneal and quench

are recommended . And finished cold drawn duplex steel pipe , manufacturer should be solution annealed and quenched . The minimum annealing tempeture is 19250F . Annealing should be followed immediately by a rapid air or water quench. To obtain maximum corrosion resistance, heat treated products should be pickled and rinsed .

[mtscomaxtech-blog]

ASTM B444 / ASME SB444 Inconel 625 Tubing Alloy 625 Nickel 625

1. Grade : Inconel 625 / N06625 , Inconel 600 / N06600 , Inconel 601 / N06601 , Inconel 718 / N07718 , Hastelloy C276 / N10276 , Incoloy 800 / N0800 ,  Incoloy 825 / N08825 , Monel 400 / N04400 ; etc

2 . OD ( Outer Diameter ) : 6.00mm to 48.00mm

3 . WT ( Wall Thickness ) : 0.71mm to 2.11mm

4 . Length : As customer's requirement

5 . Standard : ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect

6 . Technology : Cold Drawn / Cold Rolled

Test :

1 . NTD(Ultrasonic test, Eddy Current test)

2 . Mechanical Test(Tension Test, Flaring Test, Flattening Test, Hardness Test, Hydraulic test)

3 . Metal Test(Metallographic Analysis, Impact Test-High/low temperature)

4 . Chemical Analysis(Photoelectric Emission Spectroscopic)

  MTSCOMAXTECH is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCOMAXTECH has the most advanced producing and testing equipment . We can totally satisfy your requirement . According to standard very strictly, nickel alloy tubes which produced by us always have correct OD and WT tolerance . Nickel alloy tubes have a very important position in thermocouple & cable industry .

  Main market or alloy tube include Europe , Middle East , Southeast Asia , South America , etc . MTSCOMAXTECH has bright annealing alloy tube and pickling alloy tube . Compared these two kinds of tubes , bright annealed alloy tubes are more popular in the market . Because it has bright out and inner surface

http://www.duplexsteeltube.com/sale-7287396-astm-b444-asme-sb444-inconel-625-tubing-alloy-625-nickel-625.html

[mtscomaxtech-blog]

TP316L Annealed & Pickled ASTM A312 Stainless Steel Pipes

WP-2-0002

1. Process Method: Annealed & Pickled  2. Surface Finish: Polished, Brush, etc  3. Ends: Beveled End/Plain End  4. Materials: TP304/L/H; TP316/L/Ti; TP309S; TP310S; TP321/H; TP317L; TP347/H, etc  5. Standards: ASTM A213/ASME SA213, ASTM A269/ASME SA269, ASTM A312, EN10216-5, JIS G3463, etc  6. Size Range:  OD: 0.23” – 48”(5.8mm – 1219mm)  WT: 0.01” – 1.125”(0.25mm – 28mm)  7. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-destructive Test, etc  8. Tolerances: According to the specification or customer’s request and drawings  9. Applications: For fluid and gas transport, structure and machining, oil & gas industry, chemical industry, electric power, boiler and heat exchanger, metallurgy, etc.

http://www.mtscomaxtech.com/product_449_TP316LAnnealedPickledASTMA312StainlessSteelPipes.html

[mtscomaxtech-blog]

High Quality 304/316 Stainless Steel Welding Pipes

WP-1-0004

1. Process Method: Annealed & Pickled  2. Surface Finish: Polished, Brush, etc  3. Ends: Beveled End/Plain End  4. Materials: TP304/L/H; TP316/L/Ti; TP309S; TP310S; TP321/H; TP317L; TP347/H, etc  5. Standards: ASTM A213/ASME SA213, ASTM A269/ASME SA269, ASTM A312, EN10216-5, JIS G3463, etc  6. Size Range:  OD: 0.23” – 48”(5.8mm – 1219mm)  WT: 0.01” – 1.125”(0.25mm – 28mm)  7. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-destructive Test, etc  8. Tolerances: According to the specification or customer’s request and drawings  9. Applications: For fluid and gas transport, structure and machining, oil & gas industry, chemical industry, electric power, boiler and heat exchanger, metallurgy, etc.

http://www.mtscomaxtech.com/product_446_HighQuality304316StainlessSteelWeldingPipes.html

[mtscomaxtech-blog]

ASTM A358 TP316L Welded Stainless Steel Indstrial Pipes

WP-1-0003

1. Process Method: Annealed & Pickled  2. Surface Finish: Polished, Brush, etc  3. Ends: Beveled End/Plain End  4. Materials: TP304/L/H; TP316/L/Ti; TP309S; TP310S; TP321/H; TP317L; TP347/H, etc  5. Standards: ASTM A213/ASME SA213, ASTM A269/ASME SA269, ASTM A312, EN10216-5, JIS G3463, etc  6. Size Range:  OD: 0.23” – 48”(5.8mm – 1219mm)  WT: 0.01” – 1.125”(0.25mm – 28mm)  7. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-destructive Test, etc  8. Tolerances: According to the specification or customer’s request and drawings  9. Applications: For fluid and gas transport, structure and machining, oil & gas industry, chemical industry, electric power, boiler and heat exchanger, metallurgy, etc.

http://www.mtscomaxtech.com/product_445_ASTMA358TP316LWeldedStainlessSteelIndustrialPipes.html

[mtscomaxtech-blog]

Incoloy 800/UNS N08800 Nickel Alloys Seamless Pipes

NP-4-0001

1. Process Method: Cold Drawn/Cold Rolled  2. Surface Finish: annealed & pickled, bright annealed, polished  3. Materials: Inconel 625/N06625, Inconel 600/ N06600, Inconel 601/N06601,Inconel 718/N07718, Hastelloy C276/N10276, Incoloy 800/N0800, Incoloy 825/N08825, Monel 400/N04400; etc  4. Ends: Beveled or Plain  5. Standards: ASTM B163, ASTM B167, ASTM B444, ASTM B622, etc  6. Size Range:  OD: 0.23’’-12’’(5.8mm-323.9mm)  WT: 0.04’’-1’’(1.0mm-25.4mm)  7. Tolerances: according to the specification or customer’s request and drawings  8. Applications: heat exchanger, condenser, shipping industry, precision machinery, ect  9. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-Destructive Test, etc  10. Advantages:  Advanced technology of Cold Drawn Machine  Advanced Annealing Machine                                                                              

http://www.mtscomaxtech.com/product_431_Incoloy800UNSN08800NickelAlloysSeamlessPipes.html                                                              

[mtscomaxtech-blog]

Seamless Pipe Nickel Alloy Inconel Alloy 625 Supplier

NP-3-0003

1. Process Method: Cold Drawn/Cold Rolled  2. Surface Finish: annealed & pickled, bright annealed, polished  3. Materials: Inconel 625/N06625, Inconel 600/ N06600, Inconel 601/N06601,Inconel 718/N07718, Hastelloy C276/N10276, Incoloy 800/N0800, Incoloy 825/N08825, Monel 400/N04400; etc  4. Ends: Beveled or Plain  5. Standards: ASTM B163, ASTM B167, ASTM B444, ASTM B622, etc  6. Size Range:  OD: 0.23’’-12’’(5.8mm-323.9mm)  WT: 0.04’’-1’’(1.0mm-25.4mm)  7. Tolerances: according to the specification or customer’s request and drawings  8. Applications: heat exchanger, condenser, shipping industry, precision machinery, ect  9. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-Destructive Test, etc  10. Advantages:  Advanced technology of Cold Drawn Machine  Advanced Annealing Machine

 http://www.mtscomaxtech.com/product_430_SeamlessPipeNickelAlloyInconelAlloy625Supplier.html

[mtscomaxtech-blog]

Standard ASTM B167 Inconel 625/N06625 Nickel Alloys Seamless Pipes

NP-3-0001

1. Process Method: Cold Drawn/Cold Rolled  2. Surface Finish: annealed & pickled, bright annealed, polished  3. Materials: Inconel 625/N06625, Inconel 600/ N06600, Inconel 601/N06601,Inconel 718/N07718, Hastelloy C276/N10276, Incoloy 800/N0800, Incoloy 825/N08825, Monel 400/N04400; etc  4. Ends: Beveled or Plain  5. Standards: ASTM B163, ASTM B167, ASTM B444, ASTM B622, etc  6. Size Range:  OD: 0.23’’-12’’(5.8mm-323.9mm)  WT: 0.04’’-1’’(1.0mm-25.4mm)  7. Tolerances: according to the specification or customer’s request and drawings  8. Applications: heat exchanger, condenser, shipping industry, precision machinery, ect  9. Inspection: PMI Test, Hydraulic Test, Eddy Current Test, Non-Destructive Test, etc  10. Advantages:  Advanced technology of Cold Drawn Machine  Advanced Annealing Machine

http://www.mtscomaxtech.com/product_428_StandardASTMB167Inconel625N06625NickelAlloysSeamlessPipes.html

[mtscomaxtech-blog]

25.4MM S32760 Duplex Steel Annealed Pipe With ASTM A790/790M Standard

DP-1-0008

1. Process Method: Cold Drawn, Cold Rolled  2. Surface Finish: Annealed & Pickled  3. Ends: Beveled End/Plain End  4. Standards: ASTM A789, ASTM A790, EN 10216-5, etc  5. Materials: S32205, S31803, S32304, S32750, F51, F53, 2205, 2507, etc  6. Size Range:  OD: 0.23’’-12’’ (5.8mm-323.9mm)  WT: 0.04’’-1’’ (0.71mm-25.4mm)  7. Tolerances: According to the specification or customer’s request and drawings  8. Inspection: PMI test, Hydraulic Test, Eddy Current Test, Non-destructive Test, etc  9. Package: Bundles/Wooden case/Iron case  10. Application: used in petroleum, chemical industry, instrument, industrial transportation, mechanical structure parts, etc

http://www.mtscomaxtech.com/product_413_254MMS32760DuplexSteelAnnealedPipeWithASTMA790790MStandard.html