Things you must know before buying a stainless steel sink.
2303 17TH ST. SARASOTA, FL
MAIN / SALES OFFICE (941) 954-1100 FAX: (941) 388-7266 PRODUCTION OFFICE: (941) 388-7874
HOURS: MONDAY – FRIDAY 8:00 AM TO 5:00 PM
SATURDAY BY APPOINTMENT ONLY
WWW.NSSMILLWORKS.COM WWW.FACEBOOK.COM/NSSMILLSANDNATURALSTONESOLUTIONS
Things you must know before buying a stainless steel sink.
Start with the gauge of the sink. The gauge is the thickness of the steel, the smaller the number the thicker the steel. Most kitchen sink manufacturers produce stainless steel sinks from 22 gauge to 16 gauge. The thicker steel will cost you more all things being equal. The reason you might want a thicker steel sink is it is more resistant to dents. We recommend purchasing a 18 gauge or 16 gauge stainless steel sink.
Next you’ll want to know what type of sound insulation is installed on the sink.
The sound insulation serves one purpose, to reduce or eliminate the ringing that follows after you toss something into the sink. Without any sound insulation your sink will sound like a bell. The most common type is a sprayed textured coating on the back side of the sink. You may also see a sound dampening pad under the spray coating; this is a very effective sound deadening combination. You can hit this type of sink with a hammer and hear little more than a thud. Both types are fine, just be sure you have some form of sound insulation.
One of the least considered aspects of a sink is the grade of stainless steel. Like most metals, stainless steel is broken up into many different grades with different properties. In my research I have found that most stainless steel sinks are one of four grades, 201, 301, 302, 304. A grade 201 sink is most often seen in the big home improvement stores on the lowest end of the price scale. As of this writing I have found them as low as $90.00 for a 33” under mount. Grade 302 is most often used for utensils. As you progress into the higher grades, the steel becomes more corrosion, oxidation, and rust resistant. The sinks ability to stay shiny and new is what this comes down to. We would suggest purchasing a sink made of 302 or 304 grade stainless steel.
Finally we come to design, of course, this is where most of us would start our search for a new sink, but I’ve left this for last because it will affect the price of the sink more than any other single aspect we’ve covered. Looking at sink design today you can’t help but be amazed at the creativity and innovation that exists. The only real advice I can give concerning design is to Be sure your counter top fabricator can cut the shape of the sink and that your plumber is aware of the type of installation before the counter top is installed.
jacobvanloon
janainaart
titsay
izzy806
origamiaround
theartofmadeline
snowghoul