无标题 @rarleighlife - Tumblr Blog

Square Sign Posts

· Posts are manufactured conforming to FHWA and ATSSA standards.

· Steel material conforms to ASTM A1011, Grade 50.

· Yield strength after cold-forming is 60,000 psi minimum.

· Posts are manufactured conforming to ASTM A653, G90 or G140.

· Punching with 7/16" holes on 1" centers on all four sides down the entire length of the post.

· Five kinds of cross section including 1.50''X1.50", 1.75", 2.00", 2.25", and 2.50"X2.50".

· Available in 12 and 14 gauge thickness with all kinds of length according to your demand.

· Powder coated sign posts with all kinds of colors are also available.

Better Products square sign posts are made of high-strength galvanized steel and are designed for traffic, parking, and safety sign applications. Suitable for various scenarios where you need them, including roads, highways, parking lots, and municipal works.

High-Strength Heavy Duty Wedge Anchor

Specially engineered for high-load anchoring in solid concrete, this product is widely used for securing steel bollards, guardrails, signpost bases, steel columns, and heavy machinery.

This product consists of four main components for strong and reliable anchoring:

High-strength anchor bolt with tapered cone end

Expansion clip for secure concrete grip

Flat washer for pressure distribution

Heavy-duty hex nut for tightening and fastening

Installation is simple: drill and clean the hole, insert the wedge anchor through the fixture, hammer it into place, and tighten the hex nut. As the nut tightens, the expansion clip grips the concrete wall firmly, creating a strong and reliable mechanical anchorage.

97SQX/SQF Cap for Square Posts

Key Features

Designed for square sign posts

Corrosion-resistant finish for outdoor use

Protects post ends from moisture and debris

Clean and finished aesthetic appearance

Easy to install on post tops

Screw Earth Anchors

Supplying a wide array of Screw Earth Anchors to support your vineyard and orchard structures whether it be for stony ground or dirt. Our screw earth anchors are made of high quality steel with a center or offset eye and helix plate.

• Material: High quality steel

• Surface treatment: Hot-Dip Galvanized/Powder coated/Painted

• Environment Friendly: Yes

• Usage: Support the vineyard and orchard structures

Steel Barrier A Frame Leg

The Steel Barrier A-Frame Leg is a durable support leg designed for barrier frames and sign stands used in traffic control, crowd management, and construction zones. Made from high-strength steel with corrosion-resistant finishes, this A-Frame leg provides stable support and easy setup for portable barriers and temporary signage.

Key Features

Heavy-duty steel construction for stable support

Corrosion-resistant finish for outdoor use

Compatible with barrier frames and sign stands

Lightweight and easy to install

OEM customization available

Traffic Cone

Heavy Duty Fixed Steel Bollards

The Heavy‑Duty Fixed Steel Bollards Powder Coated Posts are high‑strength protective bollard posts designed to protect pedestrians, buildings, utilities, and equipment from vehicle impact. Made from thick structural steel with a durable powder‑coated finish, these fixed bollards provide long‑lasting outdoor corrosion resistance and enhanced visibility. Ideal for parking lots, sidewalks, commercial facilities, and industrial sites, they deliver reliable perimeter protection in demanding environments.

Key Features

Heavy‑duty structural steel construction

Durable powder‑coated finish for corrosion resistance

Fixed embedded installation for maximum stability

Improves visibility and outdoor performance

Multiple size options and OEM customization available

Heavy Duty Fixed Steel Bollards

The Heavy Duty Fixed Steel Bollard is a high‑strength protective post designed to safeguard pedestrians, buildings, utilities, and equipment from vehicle impact. Made from thick structural steel with corrosion‑resistant finishes, this bollard delivers long‑lasting outdoor performance. Its fixed embedded design ensures maximum stability and impact resistance for parking lots, sidewalks, commercial sites, and industrial facilities.

Key Features

Heavy duty steel construction for superior impact protection

Designed for embedded foundation installation

Corrosion‑resistant finish for outdoor durability

Ideal for pedestrian safety and asset protection

Multiple diameter and height options available

Tri-Buster Tripod Sign Stand

The Tri-Buster Tripod Sign Stand is a portable, heavy-duty support stand designed to hold standard traffic signs in temporary or changing work zones. Engineered for stability and versatility, it supports both roll-up and rigid signs — making it ideal for road construction, maintenance, public events, and emergency traffic control.

Built with a three-leg design that offers excellent resistance to wind and uneven terrain, this stand folds flat for compact storage and transport. Galvanized or powder-coated finishes are available to provide corrosion resistance and long outdoor service life.

Key Features

Stable three-leg tripod base for reliable sign support

Supports 36″ and 48″ roll-up or rigid signs

Telescoping center upright for adjustable height

Compact and foldable design for easy transport and storage

Galvanized or powder-coated finishes available upon request

Suitable for traffic control, work zones, events, and emergency signage

Hot Dip Galvanized Surface Mounted Steel Bollards

The Hot‑Dip Galvanized Surface Mounted Steel Bollard is a heavy‑duty steel post designed to protect pedestrians, vehicles, buildings, and utilities. Its hot‑dip galvanized finish provides long‑term corrosion resistance, while the surface-mounted base plate allows quick and secure installation on concrete or paved surfaces. Ideal for parking lots, sidewalks, commercial properties, and industrial sites.

Key Features

High-strength structural steel construction for impact protection

Hot‑dip galvanized finish ensures superior outdoor durability

Surface-mounted with welded base plate for easy installation

Protects pedestrians, property, and equipment

Multiple sizes and OEM customization available

Powder Coated Surface Mounted Steel Bollards

Powder coated surface mounted steel bollards are heavy-duty safety posts designed to protect pedestrians, buildings, equipment, and utilities from accidental vehicle collisions. These steel bollards feature a robust welded base plate and a durable powder-coated finish that ensures long-lasting corrosion resistance in outdoor environments, making them ideal for parking lots, sidewalks, commercial properties, and industrial facilities.

Surface mounted installation simplifies setup without core drilling, and the bright powder-coated finish improves visibility for enhanced safety. Custom sizes, wall thicknesses, base plate options, and OEM services are available to suit specific project requirements.

Key Features

Heavy-duty steel construction for impact protection

Durable galvanized and powder-coated surface for rust resistance

Surface mount with welded base plate for easy installation

Bright safety finish improves visibility

Top Cutting Steel Bollard

· Height: 1000mm, 1100mm, 1200mm etc.

· Outer Diameter: 140mm,165mm,203mm

· Wall Thickness: 4mm, 5mm etc.

· Base Plate Size: 250mm Dia x 12mm,290mm Dia x 12mm etc.

· Top: 45-degree cut steel cap.

· Surface: Galvanized and powder-coated yellow.

· Benefits: Protects utilities, electronics, machinery, buildings, or pedestrians from accidental collisions.

· Note: OEM service is available, different materials and specifications can be customized according to your demands.

U Channel Posts

· Posts are manufactured conforming to FHWA and ATSSA standard.

· Steel material conforms to ASTM A499, Grade 60.

· All kinds of specifications including · 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more.

· 3/8" or 7/16" diameter holes on 1"or 2" centers, punched full-length.

· Available in hot-dipped galvanized, powder coated or painted. Galvanized by hot dipping per ASTM A123.

· Tapered ends are also available.

· Available in any length according to your demand.

· Yield and tensile strength: 60,000-80,000 psi.

Square Sign Posts

· Posts are manufactured conforming to FHWA and ATSSA standards.

· Steel material conforms to ASTM A1011, Grade 50.

· Yield strength after cold-forming is 60,000 psi minimum.

· Posts are manufactured conforming to ASTM A653, G90 or G140.

· Punching with 7/16" holes on 1" centers on all four sides down the entire length of the post.

· Five kinds of cross section including 1.50''X1.50", 1.75", 2.00", 2.25", and 2.50"X2.50".

· Available in 12 and 14 gauge thickness with all kinds of length according to your demand.

· Powder coated sign posts with all kinds of colors are also available.

Hanger Brackets

Hanger brackets and flat pattern brackets are used for Chicken Reaper System.

Fluted (corrugated) Polypropylene (PP) sheet

Specification

·Thickness: 4mm, 10mm or 12mm, other thickness is available.

·Size : 48"x96", other size can be customized.

·Color: Any color is available.

Note: OEM service is available, different materials and specifications can be customized according to your demands.

Features：

Weather Resistant Moisture and chemical resistant Easily cuts with a standard utility knife Excellent Adhesion Excellent compression strength

U Channel Posts

· Posts are manufactured conforming to FHWA and ATSSA standard.

· Steel material conforms to ASTM A499, Grade 60.

· All kinds of specifications including · 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more.

· 3/8" or 7/16" diameter holes on 1"or 2" centers, punched full-length.

· Available in hot-dipped galvanized, powder coated or painted. Galvanized by hot dipping per ASTM A123.

· Tapered ends are also available.

· Available in any length according to your demand.

· Yield and tensile strength: 60,000-80,000 psi.

Trending Blogs

Recently Viewed Blogs

无标题